• Digital Storage Oscilloscope UTD2202CM

    0 out of 5
    (0)

    Specifications and features:

    1. 2 channels,1GS/s sample rate

    2. 200MHzbandwidth, 16Mpts maximum memory depth

    3. Waveformacquisition rate is up to 150,000wfms/s

    4. Verticalsensitivity: 2mV/div~5V/div

    5. Time-basedrange: 2ns/div~50s/div

    6. Trigger modes:edge, pluse, runt, video, slope, alternate

    7. Customized AUTO,fast captures the signals

    9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform

    10. 34 kinds ofauto measurements

    11. Optional LAmodule

    12. Standardinterfaces: USB Host,USBDevice,Pass/Fail

    13. 7-inch TFT LCD,WVGA (800*480)

    SKU: n/a
  • UNI-T 2 Channel UPO2102E Ultra Phosphor Oscilloscope

    0 out of 5
    (0)
    • 100MHz bandwidth
    • number of channels 2
    • sampling 1GS / s
    • max memory depth 56Mpts (per channel) (previously 28Mpts per channel)
    • waveforms per second up to 80,000 wfms/s (formerly 50,000 wfms/s)
    • time base range 5ns/div – 50s/div
    • input coupling (1MΩ ± 2%) // (20pF ± 3pF)
    • verical axis 1mV/div – 20V/div (1MΩ)
    • DC gain accuracy ± 3%
    • number of saved waveforms 65000
    • trigger : Edge, Window, Runt, Time Out, Nth Edge, Delay, Duration, Setup / Hold, Pulse Width, Slope, Video, Pattern, RS232 / UART, I2C, SPI
    • mathematical operations with waveforms : A + B, A-B, AxB, A / B, FFT, Logic operation, Editable Advanced, Filter
    • automatic Measurement : Max, Min, High, Low, Middle, Pk-Pk, Ample, Mean, Cycle Mean, RMS, Cycle RMS, Cycle Area, OverShoot, PreShoot, Period, Freq, Rise, Fall, + Width, -Width, + Duty, -Duty, RiseDelay, FallDelay, Phase, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF
    • number of measurements : 5 simultaneous measurements
    • statistics : Mean, Max, Min, standard deviation, number of measurements
    • frequency counter : 6 bits
    • standard interfaces : USB-Host, USB-Device, LAN, AUX (Trig Out, Pass / Fail)
    SKU: n/a
  • UNI-T MSO3152E 150MHz Mixed Signal 2 Channel Digital Oscilloscope

    0 out of 5
    (0)
    Analog bandwidth 150MHz 250MHz
    Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital
    Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels)
    Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels)
    Memory depth 70Mpts
    Waveform capture rate 200,000wfms/s
    Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display )
    Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall]
    Input impedance (1MΩ±1%) II (20pF±3pF)
    Input impedance digital (101kΩ±1%) II (9pF±1pF)
    Vertical scale 1mV/div~20 V/div (1 MΩ)
    DC gain accuracy <5mV: ±3%, ≥5mV: ±2%
    Waveform record 100,000 frames
    Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
    CAN, LIN, FlexRay
    Bus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay
    Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations
     

     

    Auto measurements

    Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
    -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
    channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A
    Measurement display 5 types
    Measurement statistics Average, Max, Min, standard deviation and number of measurements
    Frequency counter 6 bits
    Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA
     

     

    Standard Accessories

    USB interface cable UT-D14
    Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06
    Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05
    16CH Logic analyzer probe UT-15M

     

    SKU: n/a
  • UNI-T MSO3154E 150MHz Mixed Signal 4 Channel Digital Oscilloscope

    0 out of 5
    (0)
    Analog bandwidth 150MHz 250MHz
    Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital
    Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels)
    Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels)
    Memory depth 70Mpts
    Waveform capture rate 200,000wfms/s
    Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display )
    Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall]
    Input impedance (1MΩ±1%) II (20pF±3pF)
    Input impedance digital (101kΩ±1%) II (9pF±1pF)
    Vertical scale 1mV/div~20 V/div (1 MΩ)
    DC gain accuracy <5mV: ±3%, ≥5mV: ±2%
    Waveform record 100,000 frames
    Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
    CAN, LIN, FlexRay
    Bus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay
    Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations
     

     

    Auto measurements

    Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
    -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
    channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A
    Measurement display 5 types
    Measurement statistics Average, Max, Min, standard deviation and number of measurements
    Frequency counter 6 bits
    Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA
     

     

    Standard Accessories

    USB interface cable UT-D14
    Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06
    Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05
    16CH Logic analyzer probe UT-15M

     

    SKU: n/a
  • UNI-T MSO3254E 250MHz Mixed Signal 4 Channel Digital Oscilloscope

    0 out of 5
    (0)
    Analog bandwidth 150MHz 250MHz
    Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital
    Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels)
    Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels)
    Memory depth 70Mpts
    Waveform capture rate 200,000wfms/s
    Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display )
    Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall]
    Input impedance (1MΩ±1%) II (20pF±3pF)
    Input impedance digital (101kΩ±1%) II (9pF±1pF)
    Vertical scale 1mV/div~20 V/div (1 MΩ)
    DC gain accuracy <5mV: ±3%, ≥5mV: ±2%
    Waveform record 100,000 frames
    Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
    CAN, LIN, FlexRay
    Bus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay
    Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations
     

     

    Auto measurements

    Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
    -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
    channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A
    Measurement display 5 types
    Measurement statistics Average, Max, Min, standard deviation and number of measurements
    Frequency counter 6 bits
    Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA
     

     

    Standard Accessories

    USB interface cable UT-D14
    Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06
    Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05
    16CH Logic analyzer probe UT-15M

     

    SKU: n/a
  • UPO 2104E Ultra Phosphor Oscilloscope

    0 out of 5
    (0)
    Specifications
    Model UPO2104E
    Bandwidth 100MHz
    Channels 4
    Sampling rate 1GS/s
    Memory depth 56Mpts (single channel)
    Waveform capture rate 83,000wfms/s
    Time base scale (s/div) 5ns/div~50s/div
    Input impedance (1MΩ±2%) II (20pF±3pF)
    Vertical scale (V/div) 1mV/div~20V/div (1MΩ)
    Waveform record 65,000 Frames
    Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code
    Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced
    Auto measurements  Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A  (Rising edge), Delay B->A (Falling edge).
    Number of measurements Display 5 measurements at the same time
    Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements
    Frequency counter Hardware 6 bits counter (Channels are selectable)
    Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail)
    General Characteristics
    Power 100V~240VAC, 50Hz/60Hz
    Display 8 inches TFT color LCD Display with WVGA (800×480) resolution
    Product color White and grey
    Product net weight 3.5kg
    Product size 336mm×164mm×108mm
    Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable
    Standard individual packing Carton box
    Standard quantity per carton 2pcs
    Standard carton measurement 450mm×420mm×280mm
    Standard carton gross weight 9.7kg
    SKU: n/a
  • UPO2102CS Ultra Phosphor Oscilloscope

    0 out of 5
    (0)

    Features and Benefits:
    1、Sample Rate up to 1GS/s;
    2、Channels 2/;
    3、Bandwidth 100MHz,;
    4、Memory Depth 32Mpts(Standard);
    5、Waveform Capture Rate up to 30,000wfms/s;
    6、With 256 level intensity grading display;
    7、Up to 65,000 frames for Waveform Record ,Replay;
    8、Support serial bus trigger and decoding;
    9、8 inches, TFT LCD,WVGA(800*480);
    10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

    SKU: UT21P02CSO
  • UPO2104CS 4 Channels Ultra Phosphor Oscilloscope

    0 out of 5
    (0)

    Features and Benefits:
    1、Sample Rate up to 1GS/s;
    2、Channels 4;
    3、Bandwidth 100MHz,;
    4、Memory Depth 28Mpts (Standard);
    5、Waveform Capture Rate up to 50,000wfms/s;
    6、With 256 level intensity grading display;
    7、Up to 65,000 frames for Waveform Record ,Replay;
    8、Support serial bus trigger and decoding;
    9、8 inches, TFT LCD,WVGA(800*480);
    10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

    SKU: UP21O02CSMHZ
  • UPO3254E Ultra Phosphor Oscilloscope

    0 out of 5
    (0)
    SKU: n/a
  • UTD1025CL Handheld Digital Storage Oscilloscopes

    0 out of 5
    (0)

    Product Features:
    1、 Fully Auto Scale; Vertical Scale and Timebase automatically adjusted with the signal and without any manual interference;
    2、 Unique and powerful Auto Setup, quick and accurate to set up for signals with any DC component;
    3、 Wider voltage measuring range; Coupled with 10×probe with attenuation up to 200V/div;
    4、 Isolated USB for much safer communication;
    5、 White and black display for your option, perfect for use outdoors with strong light;
    6、 Intelligent local or network software update;
    7、 More than 8hours of continuous battery operation.

    SKU: 80000
  • UTD1050DL Handheld Digital Storage Oscilloscopes

    0 out of 5
    (0)

    Product Features:
    1、 Fully Auto Scale; Vertical Scale and Timebase automatically adjusted with the signal and without any manual interference;
    2、 Unique and powerful Auto Setup, quick and accurate to set up for signals with any DC component;
    3、 Wider voltage measuring range; Coupled with 10×probe with attenuation up to 200V/div;
    4、 Isolated USB for much safer communication;
    5、 White and black display for your option, perfect for use outdoors with strong light;
    6、 Intelligent local or network software update;
    7、 More than 6 hours of continuous battery operation.

    SKU: n/a
  • UTD1102C Handheld Digital Storage Oscilloscopes

    0 out of 5
    (0)

    1、Automatic waveform and status configuration;
    2、Storage of waveforms, setups and interfaces; waveforms and setups reproduction
    3、Screen copy function;
    4、Fine window extension; precise analysis of waveform details and overview;
    5、Unique waveform recording, storage and replay function;
    6、HD color 5.7 inch LCD panel at 320 x 240 pixel aspect ratio;
    7、Multiple waveform mathematics functions (including add, subtract, multiply and divide);
    8、Multimeter function;
    9、USB drive system software upgrade.

    SKU: n/a
  • UTD1202C Handheld Digital Storage Oscilloscope

    0 out of 5
    (0)
    Specifications
    Model UTD1202C
    Bandwidth 200MHz
    Channels 2
    Sampling rate 1GS/s
    Rise time ≤1.8ns
    Memory depth 7.5kpts
    Vertical sensitivity 5mV/div~50V/div
    Time base scale 2ns/div-50s/div
    Storage modes Setup, waveform, bitmap
    Trigger modes Edge, pulse width, video and alternative
    Interfaces USB host, USB OTG (UTD1202C Optional)
    Multimeter Specifications Range Accuracy
    DC voltage (V) 600mV/6V/60V/600V/1000V ±(1%+5)
    AC voltage (V)(45Hz~400Hz) 600mV/6V/60V/600V/700V ±(1.2%+5), Frequency: <200Hz
    ±(1.5%+5), Frequency: ≥200Hz
    DC current (A) 6mA/60mA/600mA ±(1.2%+5)
    6A ±(1.5%+5)
    AC current (A)(45Hz~400Hz) 6mA/60mA/600mA ±(2%+5)
    6A ±(2.5%+5)
    Resistance (Ω) 6kΩ/60kΩ/600kΩ ±(1.2%+5)
    600Ω/6MΩ/60MΩ ±(1.5%+5)
    Capacitance (F) 6nF/6mF ±(5%+10)
    60nF/600nF/6μF/60μF/600μF ±(4%+5)
    Display count 6000
    Auto range
    General Characteristics
    Power Li-ion battery: 7.4V 4400mAh; DC adapter: 100~240V 50/60Hz input, 9V/4A output
    Display 5.7 inches TFT LCD, QVGA (320×240)
    Product net weight Red and grey
    Product color 1.8kg
    Product size 268mm x 168 mm x 60mm
    Standard accessories Probe x2 (1x, 10x switchable), current voltage converter, power cord, adapter, test leads
    Standard individual packing Carton box, carrying bag
    Standard quantity per carton 4pcs
    Standard carton measurement 500mm x 400mm x 320mm
    Standard carton gross weight 16.7kg
    SKU: n/a

Showing 1–15 of 21 results