-6%

ET 8138 DMM


  • SLIM – Ultra-Thin Design That Fits Easily In Your Pocket.
  • AUTOMATIC – Automatic Range And Automatic Identification.
  • DESIGN – It Is Comparable In Size To The 4.7-Inch Mobile Phone. The Design Is Exquisite, Simple And Generous, 3.5 Inch Large Touch Screen.
  • COLOUR LCD DISPLAY – Simulation Bar: More Intuitive Display Of Measurements. The Analog Bar Provides Fast And Accurate Digital Representation.
  • MODEL – The Winapex 8138 Has A Colour Screen, And Has Hz Function.

5,905 6,250

Compare

WinApex ET8138 Touch Screen Multimeter with Colour Display

  • SLIM – Ultra-Thin Design That Fits Easily In Your Pocket.
  • AUTOMATIC – Automatic Range And Automatic Identification.
  • DESIGN – It Is Comparable In Size To The 4.7-Inch Mobile Phone. The Design Is Exquisite, Simple And Generous, 3.5 Inch Large Touch Screen.
  • COLOUR LCD DISPLAY – Simulation Bar: More Intuitive Display Of Measurements. The Analog Bar Provides Fast And Accurate Digital Representation.
  • MODEL – The Winapex 8138 Has A Colour Screen, And Has Hz Function.

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ET 8138 DMM”

There are no reviews yet.

  • Fluke 15B+ Digital Multimeter

    0 out of 5
    (0)

    Key features

    • 600 V Cat III safety rating
    • 50% bigger display with bright white backlight
    • Voltage, resistance, continuity, capacitance
    • Input terminal for ac and dc current measurements to 10 A current
    • Diode test, data hold
    SKU: n/a
  • MIC-10 , 1000 V Insulation Tester

    0 out of 5
    (0)

    Insulation Resistance Meter

    SKU: n/a
  • JM-8126 58 in 1 Multitool Interchangeable Magnetic Screwdriver Set

    0 out of 5
    (0)
    Features:
    Brand new 58-in-1 interchangeable precise manual tool set. High hardness and good toughness.
    Professional portable hardware tools with perfect weight & compact design for easy carry.
    Non-slip tough shaft ensures greater comfort and convenience.
    Available for repairing laptops, mobile devices, and other precision items like wristwatches.
    SKU: n/a
  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
  • PQM-707 Power Quality Analyzer

    0 out of 5
    (0)
    • Features:

      • 7″ touch screen – intuitive operating
      • CAT IV 600V – high safety
      • all parameters acc. to class S – high accuracy of measurements
      • Li-Ion rechargeable battery – higher mobility
      • removable memory card – recording data with no restrictions

      Possible measurements:

      • Measurements according to EN 50160,
      • Voltage L1, L2, L3, N-PE (five inputs),
        – average, minimum, maximum values, range to 760 V, ability to work with voltage transformers,
      • Current L1, L2, L3, N (four inputs),
        – average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers,
      • Crest factor for voltage and current,
      • Frequency from 40 Hz to 70 Hz ,
      • Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
      • Power recording:
        • Budeanu method,
        • IEEE 1459,
      • Active, reactive, apparent energy,
      • Power factor, cosφ, tgφ,
      • Up to 50th harmonics for voltage and current,
      • Total Harmonic Distortion (THD) for voltage and current,
      • Short-term (PST) and long-term (PLT) flicker,
      • Unbalance of voltage and current,
      • Current and voltage events registration including waveforms and RMS graphs half period,
      • Inrush current
      • Calculator of energy tariffs
      • ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
    SKU: n/a
  • MS6812 Cable Tracker

    0 out of 5
    (0)

    The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker

    ● Sound and Light Instruction
    ● Cont and Tone LED Light

    Applications
    – Judge Continuity of the Cables or Wires
    – Track the Cables or Wires, and Diagnose the Break Point
    – Receive the Tone Signal on the Cables or Wires(Telephone Line)
    – Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
    – Send a Single Solid or a Dual Alternating Tone to the Target Cables or Wires

    SKU: n/a