MIC-15k1 ,15kV Insulation Quality Analyzer
1 in stock
Features:
- Diagnostics of insulation systems based on standard measurements of IR, DAR, PI, SV, RT, DD, widened with thepartial discharge (PD) indicator for every each of these measurements.
- It allows testing the electrical durability of the tested object – breakdown voltage indication.
- High resistance to electromagnetic interferences guarantees uninterrupted work in power stations and close to high voltage transmission lines up to 1200 kV AC and 500 kV DC.
- The function of smooth voltage rise in time (RT – Ramp Test) allows to state the partial discharges in the facility and to carry out a partial location of their occurrence.
- Efficient converter with a power of ~150 W that enables insulation burnout, allowing for pinpointing the location of cables and wires short circuit using one of the following:
- visual method (if power cables are visible along the entire length),
- reflectometric methods, seismic-acoustic waves detector, or with A-frame to indicate direction of the fault (the conductor must be buried in the ground with earth direct contact).
- Compatible with external software.
₨0
1 in stock
CompareMIC-15k1 meter is designed to measure insulation resistance of power objects, i.e.:
- single- and multicore cables,
- transformers,
- motors and generators,
- capacitors, switches and other devices installed in power stations.
It is especially recommended for measurements in areas with very high electromagnetic disturbances, e.g. electrical substations with 1200 kV AC and 500 kV DC. Thanks to the 15 kV measuring voltage (in accordance with ANSI / NETA ATS-2009 TABLES 100.1) the meter can be used for measuring objects with a nominal voltage above 34.5 kV.
| Weight | 6.3 kg |
|---|---|
| Dimensions | 39 × 31 × 17 cm |
Insulation resistance measurement
Measuring range according to IEC 61557-2
UN = 15 000 V: 50 kΩ…40.0 TΩ
Measurement with DC and increasing voltage (SV) for UISO = 15 kV
| Range | Resolution | Accuracy |
|---|---|---|
| 0,0…999 kΩ | 1 kΩ | ±(3% m.v. + 10 digits) |
| 1,00…9,99 MΩ | 0,01 MΩ | ±(3% m.v. + 10 digits) |
| 10,0…99,9 MΩ | 0,1 MΩ | ±(3% m.v. + 10 digits) |
| 100…999 MΩ | 1 MΩ | ±(3% m.v. + 10 digits) |
| 1,00…9,99 GΩ | 0,01 GΩ | ±(3% m.v. + 10 digits) |
| 10,0…99,9 GΩ | 0,1 GΩ | ±(3% m.v. + 10 digits) |
| 100…999 GΩ | 1 GΩ | ±(3,5% m.v. + 10 digits) |
| 1,00…9,99 TΩ | 0,01 TΩ | ±(7,5% m.v. + 10 digits) |
| 10,0…20,0 TΩ | 0,1 TΩ | ±(12,5% m.v. + 10 digits) |
| 10,0…40,0 TΩ | 0,1 TΩ | ±(12,5% m.v. + 10 digits) |
Ranges of measured resistance depending on the test voltage
| Voltage UISO | Measuring range |
|---|---|
| 50 V | 200 GΩ |
| 100 V | 400 GΩ |
| 250 V | 1,00 TΩ |
| 500 V | 2,00 TΩ |
| 1000 V | 4,00 TΩ |
| 2500 V | 10,00 TΩ |
| 5000 V | 20,0 TΩ |
| 10 000 V | 40,0 TΩ |
| 15 000 V | 40,0 TΩ |
Capacitance measurement
| Range | Resolution | Accuracy |
|---|---|---|
| 0…999 nF | 1 nF | ±(5% m.v. + 5 digits) |
| 1,00…49,99 µF | 0,01 µF | ±(5% m.v. + 5 digits) |
- Displaying measured capacity after RISO measurement
- For measurement voltages below 100 V the measurement error is not specified
Technical specification
- type of insulation acc. to: EN 61010-1 and IEC 61557 double
- measurement category acc. to EN 61010-1
- IV 1000 V (operating altitude ≤2000 m)
- IV 600 V (operating altitude ≤3000 m)
- ingress protection acc. to EN 60529: IP67 (IP40 for closed case)
- resistance to external interference voltages: up to 1550 V
- resistance to external interference currents: up to 10 mA
- advanced, digital filtering of interferences: 10 / 30 / 60 / 100 / 200 seconds
- test leads lock: yes
- power supply: Li-Ion 14.8 V rechargeable battery from network 90 V ÷ 260 V, 50 Hz/60 Hz
- dimensions: 390 x 308 x 172 mm
- weight: approx. 6.3 kg
- storage temperature: -25ºC…+70ºC
- operating temperature: -20ºC…+50ºC
- humidity: 20%…90%
- operating altitude: ≤3000 m
- reference temperature: +23ºC ± 2ºC
- reference humidity: 40%…60%
- display: graphical LCD
- number of RISO measurements with battery power supply: min. 1000 acc. to EN 61557-2
- data transmission: USB and Bluetooth
- quality standard: ISO 9001 compliant
- device meets the requirements of standards: EN 61010-1 and IEC 61557
- the product meets EMC requirements (immunity for industrial environment) with accordance to standards: EN 61326-1 and EN 61326-2-2
Brand
SONEL
Based on 0 reviews
Be the first to review “MIC-15k1 ,15kV Insulation Quality Analyzer”
-
-
-
Environment Meters
UT362 Anemometer
1. Data hold, LCD backlight
2. ℃/℉ selectable3. Auto power off (cancelable)4. 2044 sets data storage5. Auto record function with 0 .5~255s interval6. Wearproof fan shaft for improved accuracy and reliability7. Wind speed modes: MAX, MIN, Real-time8. Wind count modes: MAX, 2/3 MAX, MIN, AVG, real-time9. 7 selectable units: m/s, km/h, ft/min, MPH, KNOTS, CFM, CMMSKU: n/a
Related products
-
Insulation Tester
UT502A Insulation Resistance Tester
1. 2000 count LCD display, overload indication, backlight
2. AC voltage measurement, auto power off3. Auto discharge4. Continuous measurements mode, red warning light and buzzer function5. Continuous low resistance measurement6. PI and DAR measurement, auto resistivity calculation7. Low resistance returning to zero function to improve accuracySKU: n/a -
Insulation Tester
JM Z16 HEAT INSULATION MAT
JAKEMY JM-Z16 Magnetic Heat Insulation Silicone anti-static Working Mat for Soldering Assembling Electronics DIY Repair.
Feature:
Brand new and high quality.
Heat-resistant coefficient: 300 Celcius degree (hot wind) / 230 Celcius degree (direct contact).
Anti-static coefficient: 1*10E12ohm.
Units design, easy to keep track of parts.
Food grade material, non-toxic and safe in use. 6. Suitable for electronics devices repairing.Accessories:
Anti-static and heat-proof working mat*1SKU: n/a
There are no reviews yet.