No products in the cart.
-15%
Optical Multimeter
UT 695D-10 Optical Multimeter
Availability:
5 in stock
| Specifications | ||
| Model | Description | |
| Optical power meter | Wavelength range | 800nm~1700nm |
| Calibrated wavelength | 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm | |
| Measurement range | -70~3dBm | |
| Uncertainty | ±5% | |
| Display resolution | Linear: 0.1%, logarithmic: 0.01dBm | |
| Connector | FC/SC/ST | |
| Detector type | InGaAs | |
| Visual fault locator | Wavelength | 650nm±10nm |
| Power | 10mW (measurable optical fiber length: approximately 8~10km) | |
| Mode | Continuous/Pulse | |
| Connector | FC/SC/ST | |
| Flashlight | √ | |
| LAN cable sequence test | Line sequence measurement (LED1~8, LED_G) | |
| General Characteristics | ||
| Power | 1050mAh rechargeable battery | |
| Display | 42mm x 33mm | |
| Product color | Red and grey | |
| Product net weight | 168g | |
| Product size | 132mm x 68mm x 31mm | |
| Standard accessories | USB cable | |
| Standard individual packing | Gift box, English manual | |
| Standard quantity per carton | 10pcs | |
| Standard carton measurement | 305mm x 270mm x 130mm | |
| Standard carton gross weight | About 2.7kg | |
₨11,100 ₨13,080
5 in stock
CompareUT695D-10 includes optical power meter, visual fault locator, flashlight, and remote cable tester. UT695D-10 is used for optical signal power measurement, optical fiber line loss test, optical device insertion loss test, optical fiber fault detection, optical fiber breakpoint location, end-to-end optical fiber identification and more. Designed with IP54 dust and water prevention function, UT695D-10 can be applied to optical cable construction and maintenance, optical fiber communication, optical fiber sensing, optical CATV and other fields.
| Weight | 0.2 kg |
|---|---|
| Dimensions | 13 × 7 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT 695D-10 Optical Multimeter”
Vendor Information
- No ratings found yet!
-
Multimeters
UT 39E+ Modern Digital Multimeter
Specifications Range UT39E+ Category ratings CAT II 1000V, CAT III 600V DC voltage (V) 200mV/2V/20V/200V/1000V ±(0.05%+3) AC voltage (V) 200mV/2V/20V/200V/1000V ±(0.5%+10) DC current (A) 2000uA/20mA/200mA/2A/20A ±(0.5%+5) AC current (A) 2000uA/20mA/200mA/2A/20A ±(0.8%+10) Resistance (Ω) 200Ω/2kΩ/20kΩ/2MΩ/20MΩ/200MΩ ±(0.3%+2) Capacitance (F) 2000uF ±(4%+20) Frequency (Hz) 10Hz~2MHz ±(0.1%+3) Temperature -40℃~1000℃ ±(1%+5) -40℉~1832℉ ±(1.5%+5) Conductance (nS) 0.1~100nS ±(1%+3) Display count 20000 NCV √ General Characteristics Power 1.5V battery (R03) x 2 Display 56.5mm x 36mm Product net weight 330g Product size 175mm x 83mm x 53mm Standard accessories Test leads, temperature probe, English manual . SKU: n/a -
Rework & Soldering Station
YH 8508D Hot Air Rework Station
- 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
- 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
- 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
- 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
- 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
SKU: n/a -
Voltage Detector
UT07A-EU Socket Tester
Specifications Model UT07A-EU Operating voltage 230V Operating current ＜18mA Operating frequency 50Hz~60Hz Indications OK, leakage test passed OK Missing earth Missing live Missing neutral Live earth reverse Live earth reverse and missing earth General Characteristics Product color Red and grey Product net weight 79g Product size 65mm x 65mm x 61mm Standard individual packing Blister, English manual Standard quantity per carton 48pcs Standard carton measurement 430mm x 330mm x 365mm (0.052 CBM per standard carton) Standard carton gross weight 5.8kg SKU: n/a -
Rework & Soldering Station
YH 939BD+ SOLDERING STATION
MODEL 939BD+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Arbitary Waveform Generator
UTG962E Function/Arbitrary Waveform Generator
Specifications Model UTG962E Channel 2 Max frequency 60MHz Sampling rate 200MS/s Vertical resolution 14 bits Waveforms Sine, square, pulse, ramp, noise, DC, arbitrary Sweep modes Logarithmic, linear Frequency Characteristics Sine 1μHz~60MHz Square 1μHz~20MHz Ramp 1μHz~400kHz Pulse 1μHz~20MHz Arbitrary 1μHz~10MHz Resolution 1μHz Accuracy Within 90 days ± 50ppm Within 1 year ± 100ppm 18℃~28℃ Output Characteristics Impedance 50Ω/High Z Amplitude range 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z) DC offset range (AC+DC) ±5V (50Ω); ±10V (high Z) Amplitude resolution 1mV General Characterisitics Power 100~240VAC, 50Hz/60Hz Display 4.3”TFT LCD (480×272) Product color White and grey Product net weight 0.33kg Product size 172mm x 90mm x 68mm Standard accessories USB interface cable, power cord, BNC cable with alligator clips Standard individual packing Carton box Standard quantity per carton 4pcs Standard carton measurement 435mm x 360mm x 125mm Standard carton gross weight 3.8kg SKU: n/a -
Infrared Thermometer
UT302C+ Infrared thermometer
Specifications UT302C+ Temperature range -32℃~1100℃ -25.6℉~2012℉ Accuracy ≥0℃: ±1.5℃ or ±1.5%; <0℃: ±(1.5℃+0.1℃/℃) ≥32℉: ±3.0℉ or ±1.5%; <32℉: ±(3.0℉+0.1℉/℉) Repeatability 0.7℃ or 0.7% (1.5℉ or 0.7%) D:S ratio 20:1 Response time 250ms Emissivity 0.1~1.0 (adjustable, stores 5 sets of preset values) Spectral response 8um~14um Laser power < 1mW Features Auto power off √ Low battery indication √ LCD display Color EBTN High/low LED alarm √ High/low audible alarm √ Data hold/Lock measurement √ ℃/℉ selection √ MAX/MIN/AVG/DIFF mode √ Data storage with date and time 99 Scheduled measurement √ Backlight √ Operating temperature 0℃~50℃ (32℉~122℉) Storage temperature -20℃~60℃ (-4℉~140℉) Operating humidity <90%RH (non-condensing) Drop test 1m Tripod mounting hole √ General Characterisitics Power 9V battery Display 35mm x 35mm Product color Red and grey Product net weight 310g Product size 172mm x 113.5mm x 53mm Standard accessories Battery, carrying bag Standard individual packing Gift box, blister, English manual Standard quantity per carton 10pcs Standard carton measurement 425mm x 335mm x 365mm Standard carton gross weight 6.65kg SKU: n/a
Related products
-
Optical Multimeter
UT 693D Optical Multimeter (Power Meter & VFL)
Specifications Description UT693D Optical power meter Wavelength range 800nm~1700nm √ Calibrated wavelength 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1550nm, 1625nm, 1650nm Measurement range UT692D/UT693D: -70~10dBm, UT692G: -50~26dBm Uncertainty ±5% Display resolution Linear: 0.1%, logarithmic: 0.01dBm Connector FC/SC/ST Detector type InGaAs Visual faultlocator Wavelength 650nm±10nm √ Power 10mW (measurable optical fiber length: approximately 8~10km) Mode Continuous/Pulse Connector FC/SC/ST Features Low battery indication √ Auto power off √ IP rating IP65 Drop test 2m General Characterisitics Power 1.5V battery (LR6) x 3 Display 63mm x 40mm Product color Red and grey Product net weight 300g Product size 189mm x 87mm x 45mm Standard accessories Batteries, carrying bag Standard individual packing Gift box, English manual Standard quantity per carton 10pcs Standard carton measurement 295mm x 250mm x 210mm Standard carton gross weight 5.66kg SKU: n/a
There are no reviews yet.