No products in the cart.
-16%
Product details of HTC-1 HTC-2 Digital Thermometer Hygrometer Electronic LCD Temperature Humidity Meter
- Large LCD display, multi-function.
- HTC-1 Indoor thermometer hygrometer
- HTC-2 In-outdoor thermometer , Indoor hygrometer
- Memory of MAX & MIN measuring value.
- 12 hour / 24 hour displaying system selectable.
- degree C & F unit selectable.
- Clock, Date
- Everyday alarm function.
- Desk-top placing or Wall Hanging.
- Low power consumption.
- High stability & accuracy.
- NO backlight
Device color: White
Temperature range: Indoor & Outdoor -50 ~ +70 degree (-58 ~ +158degF)
Humidity range: 10% ~ 99% RH
Humidity accuracy: -/+10% RH
Power supply: 1.5V*1 (AAA size)
Device dimension: 10.5*9.8*2.4cm
HTC-2 cable length :1.5meter
Feature:
1. Temperature and Humidity Functions: With temperature range from -10 °C to +50 °C and humidity 10 % ∼ 99 % RH,
temperature and humidity readings show directly.
2. Time Function: Besides the basic time display, these item also has alarm clock and calendar display (month and
date).
3. Memory Function: When pushing the button MEMORY , it could display the memory of temperature and humidity
Brand
TITAN
Based on 0 reviews
Be the first to review “HTC 1 TITAN”
Vendor Information
- Store Name: superworld
- Vendor: superworld
- Address:
- 5.00 rating from 7 reviews
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Usb Tester
UNI T UT658DUAL USB Tester
Features of UT658 Series USB Testers
Certifications: CE, UKCA
● Type-A/C interface
● CE certification
● 10 sets of data storage
● Loop equivalent resistance measurement (1-480Ω)
● Same screen shows voltage, current, power, capacity, etc.
● Support fast charge protocol
SKU: n/a -
Multimeters
UT890D Digital Multimeter
Product Features 1. 6000 Counts 2. True RMS voltage and current measurements 3. Capacitance, Resistance, Buzzer, Diode 4. Capacitance with REL function, resolution is 1pF, maximum measurement range is 6000μF 5. Highly accurate frequency measurement function; minimum resolution is 0.001Hz 6. MAX\MIN and MAX-MIN value 7. DC current minimum resolution is 0.01 A, AC current minimum resolution is 1μA, maximum range is 20A 8. HOLD function,backlight and auto power off function
SKU: n/a
Related products
-
Temperature and Humidity Meter
UNI-T UT332+ Digital Temperature Humidity Meter
1. Features of UT332+ Temperature Humidity Meter
● ℃/℉ selection
● Response time: around 1 second● Humidity offset settings● Temperature offset settings● Dew point offset settings● Wet-bulb temperature offset settings● Auto power off● Data hold/data recall● MAX/MIN● Auto record time setup● LCD backlight● USB interface for data and powerSKU: n/a
There are no reviews yet.