UPO2102CS Ultra Phosphor Oscilloscope

Availability:

Out of stock


Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 2/;
3、Bandwidth 100MHz,;
4、Memory Depth 32Mpts(Standard);
5、Waveform Capture Rate up to 30,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

0

Out of stock

Compare

Features and Benefits:
1、Sample Rate up to 1GS/s;
2、Channels 2/;
3、Bandwidth 100MHz,;
4、Memory Depth 32Mpts(Standard);
5、Waveform Capture Rate up to 30,000wfms/s;
6、With 256 level intensity grading display;
7、Up to 65,000 frames for Waveform Record ,Replay;
8、Support serial bus trigger and decoding;
9、8 inches, TFT LCD,WVGA(800*480);
10、Interface:USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.

SKU: UT21P02CSO Category:
Models UPO2102CS
Bandwidth 100 MHz
Channels 2
Sample Rate 1GS/s
Max. Memory Depth 28Mpts
Waveform Capture Rate 50,000wfms/s
Time Base Scale 2 ns/div~50 s/div
Input Coupling (1MΩ± 1%)||(13 pF± 3 pF)
Vertical Scale 1mV/div~20 V/div(1 MΩ)
DC Gain Accuracy ±3%
Waveform Record 65,000 Frames
Trigger Edge, Alternate, Runt, Super picture, Nth Edge, Delay, Duration, SetupHold, Pulse Width, Slope, Video, Pattern, RS232/UART,I2C,SPI, USB
Bus Decode Standard:Parallel; Optional:RS232/UART,I2C,SPI, USB
Waveform Operation A+B、A-B、A×B、A/B、FFT、Editable Advanced
Auto Measurement Peak-Peak Value, Amplitude, Maximum, Minimum, Top Value, Bottom Value, Mean, Average, Root Mean Square Value, Overshoot, Preshoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay 1->2, and Delay 2->1.
Number of Measurements Display 5 measurements at the same time
Measurement Statistic Average, Max, Min, Standard Deviation, Number of Measurements
Frequency Counter Hardware 6 bits counter (Channels are selectable)
Standard Interface USB-Host, USB-Device, LAN,10MHz Input/Output, AUX Output (TrigOut, Pass/Fail)
General Characteristic
Power 100V~240VACrms, 45Hz~440Hz
Display  8 inches, TFT LCD, WVGA(800×480)
Product Color White and Gray
Product Net Weight 3.5 Kg ± 0.2 Kg
Product Size (W×H×D) 336mm × 163.8mm × 105mm
Standard Accessories Probe×2/4(1×,10× switchable),Power Cord ,USB Cable, PC Software CD
Standard Individual Packing Gift Box, English Manual

Brand

UNI T

  • MS 2109A ACA DCA Digital Clamp Meters

    0 out of 5
    (0)

    ● Display 6000 counts
    ● Jaw Opening Ф26mm/1.0″
    ● Auto Ranging
    ● Auto Power Off
    ● Non-Contact Voltage Detector
    ● Relative Measurement
    ● Diode Open Volatge  2.7V
    ● Continuity Buzzer  <50±20Ω
    ● MAX/MIN
    ● Data Hold
    ● Display Backlight
    ● Work Light
    ● Low Battery Display

    SKU: n/a
  • CMP-401 Digital Clamp-on multimeter

    0 out of 5
    (0)

    Additionally:

    • safe, insulated measuring clamps,
    • double molded housing,
    • autoranging/manual range selection,
    • DATA HOLD function, for holding measured values,
    • backlit LCD,
    • REL function,
    • over range indication,

    AUTO-OFF function.

    SKU: n/a
  • UT262A Non-Contact Phase Detector

    0 out of 5
    (0)

    UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.

    SKU: 22000
  • YH 907L IRON

    0 out of 5
    (0)
    SKU: n/a