UT502A Insulation Resistance Tester
Out of stock
1. 2000 count LCD display, overload indication, backlight
₨24,852 ₨30,793
Out of stock
CompareWeight | 0.5 kg |
---|---|
Dimensions | 15 × 10 × 7 cm |
Specifications | Range | UT502A | |
Insulation resistance (Ω) | Test voltages | 500V/1000V/2500V | 0%~10% |
500V | 0MΩ~99.9MΩ | ±(3%+5) | |
100MΩ~5GΩ | ±(5%+5) | ||
1000V | 0MΩ~99.9MΩ | ±(3%+5) | |
100MΩ~5GΩ | ±(5%+5) | ||
2500V | 0MΩ~99.9MΩ | ±(3%+5) | |
100MΩ~9.9GΩ | ±(5%+5) | ||
10GΩ~20GΩ | ±(10%+5) | ||
Load current | 50V (R=50kΩ) 1mA | 0%~10% | |
100V (R=100kΩ) 1mA | 0%~10% | ||
250V (R=250kΩ) 1mA | 0%~10% | ||
500V (R=500kΩ) 1mA | 0%~10% | ||
1000V (R=1MΩ) 1mA | 0%~10% | ||
2500V (R=1MΩ) 1mA | 0%~10% | ||
Short-circuit current | <2mA | ||
Low resistance (Ω) | 0.01Ω~200Ω (about 5.0V/>200mA) | ±(2%+3) | |
AC voltage (V) | 30V~600V | ±(2%+3) | |
Features | |||
Display count | 2000 | ||
DAR | 60s/15s and 60s/30s | √ | |
PI | √ | ||
Auto range/Low battery indication | √ | ||
LCD backlight/Light alarm | √ | ||
Buzzer alarm/High voltage indication | √ | ||
Over load indication/Auto discharge | √ | ||
Test voltage secondary display | √ | ||
10MΩ internal resistance test | √ | ||
Meets IEC 61557 | 61557-1:2007; 61557-2:2007; 61557-4:2007 | ||
General Characterisitics | |||
Power | 1.5V battery (LR6) x 6 | ||
Display | 70.6mm x 34mm | ||
Product color | Red and grey | ||
Product net weight | 500g | ||
Product size | 150mm x 100mm x 71mm | ||
Standard accessories | Batteries, test leads, alligator clips, gallus, test probes | ||
Standard individual packing | Gift box, carrying bag, English manual | ||
Standard quantity per carton | 20pcs | ||
Standard carton measurement | 500mm x 380mm x 330mm (0.063 CBM per standard carton) | ||
Standard carton gross weight | 18.9kg |
Based on 0 reviews
Be the first to review “UT502A Insulation Resistance Tester”
-
-
Wire & Cable Testers
UT681L Cable Tester
Main Features
1. Tests Ethernet cables and telephone lines
2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing
3. Ethernet cables: Shielded/Unshielded test
4. Visible LED indication
5. Automatically check circuit breakage, short circuit and cross circuit
6. Can toggle between fast and slow speed test modes
7. Single key operation
8. Manual/auto power off (after 10-minute inactivity)
9. Low battery indication
10. Power supplied by 9V layer-built battery
SKU: n/a -
Phase Detector Meters
UT262A Non-Contact Phase Detector
UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.
SKU: 22000
There are no reviews yet.