UT505 series handheld true RMS insulation resistance testers combine features of a digital multimeter and insulation resistance tester. Aside from the typical multimeter functions, these meters can also measure insulation resistance, PI, DAR, and automatically calculate resistance ratio to determine the insulation status.
Insulation Tester
UT505B Handheld Insulation Resistance Tester
Availability:
5 in stock
1. Auto power off
2. LCD backlight
3. High voltage output alarm
4. 99-group data storage
5. Data hold
6. Meets IEC 61557: 61557-1:2007; 61557-2:2007; 61557-4:2007
₨64,800 ₨68,310
5 in stock
CompareApplications:
UT505 can be used in insulation resistance testing of precision tools, including motors, cables, transformers, switches, electrical appliances, and insulated materials.
Weight | 0.6 kg |
---|---|
Dimensions | 10 × 22 × 6 cm |
Specifications | Range | UT505B | |
Insulation resistance (Ω) | 50V | 50V/100V/250V/500V/1000V | 0%~20% |
0.01MΩ~50MΩ | ±(3%+3) | ||
50MΩ~1GΩ | ±(3%+3) | ||
100V | 1GΩ~10GΩ | ±(10%+3) | |
0.01MΩ~100MΩ | ±(3%+3) | ||
100MΩ~1GΩ | ±(3%+3) | ||
250V | 1GΩ~20GΩ | ±(10%+3) | |
0.01MΩ~200MΩ | ±(1.5%+5) | ||
200MΩ~1GΩ | ±(1.5%+5) | ||
500V | 1GΩ~50GΩ | ±(10%+3) | |
0.01MΩ~500MΩ | ±(1.5%+5) | ||
500MΩ~1GΩ | ±(1.5%+5) | ||
1000V | 1GΩ~100GΩ | ±(10%+3) | |
0.1MΩ~2000MΩ | ±(1.5%+5) | ||
2GΩ~9.9GΩ | ±(5%+3) | ||
10GΩ~20GΩ | ±(7%+3) | ||
20GΩ~200GΩ | ±(20%+3) | ||
Load current | 50V (R=50kΩ) 1mA | 0%~10% | |
100V (R=100kΩ) 1mA | 0%~10% | ||
250V (R=250kΩ) 1mA | 0%~10% | ||
500V (R=500kΩ) 1mA | 0%~10% | ||
1000V (R=1MΩ) 1mA | 0%~10% | ||
Short circuit current | <2mA | ||
Leakage current (A) | 10~2000μA | ±(10%+3) | |
Low resistance (Ω) | 0.01Ω~100Ω (about 5V/>200mA/20mA optional) | ±(1.5%+3) | |
General resistance (Ω) | 0.01kΩ~10MΩ | ±(3%+3) | |
DC voltage (V) | 0V~600V | ±(2%+3) | |
AC voltage (V) | 0V~600V | ±(1.5%+5) | |
Frequency (Hz) | 45~1kHz | ±(0.1%+3) | |
Capacitance (F) | 100pF~500μF | ±(5%+5) | |
Features | |||
Display count | 6000 | ||
Auto range/True RMS | √ | ||
Step voltage | 10% steps at 50%~120% of range | √ | |
DAR | 60s/15s and 60s/30s | √ | |
PI/Timing measurement | √ | ||
Auto discharge | √ | ||
Auto fuse check | √ | ||
Analog bar graph | √ | ||
Continuity buzzer | √ | ||
Comparison measurement | √ | ||
Low battery indication | √ | ||
General Characterisitics | |||
Power | 1.5V battery (LR6) x 6 | ||
Display | 78mm x 59mm | ||
Product color | Red and grey | ||
Product net weight | 630g | ||
Product size | 103mm x 225mm x 59mm | ||
Standard accessories | Batteries, test leads, test probes, alligator clips | ||
Standard individual packing | Carrying bag, gift box, English manual | ||
Standard quantity per carton | 20pcs | ||
Standard carton measurement | 515mm x 380mm x 385mm (0.075 CBM per standard carton) | ||
Standard carton gross weight | 20.8kg | ||
Optional accessory | Remote test lead |
Based on 0 reviews
Be the first to review “UT505B Handheld Insulation Resistance Tester”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Clamp Meters
AC/DC DIGITAL CLAMP METER KEW 2046R
• Designed to meet international safety standard IEC 61010-1 CAT IV 600V.
• CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits.
• Very useful for power distribution companies, power utilities and maintenance fields.
• True RMS enables an accurate measurement.SKU: n/a -
Clamp Meters
UT281A True RMS AC 3000A Flexible Clamp Meters
1. 2m drop proof, IP54, ETL/Intertek certified 3rd edition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Data hold, backlight, auto power off
SKU: n/a -
Multimeters
UT181A True RMS Datalogging Multimeter
1. Trend capture
2. Data logging: 200003. Data comparison4. 3.5-inch 64k color TFT LCD5. Dual temperature measurement6. Low pass filter7. 2200mAh Li-ion battery8. Real time and date9. Peak hold10. Bluetooth/APP11.USB interface cable /PC software CD12. IP65SKU: n/a
There are no reviews yet.