ANALOG METER YX 360TR BS


Features Of Handheld YX-360TRE-B Analog Meter Voltmeter:

  • High accuracy analogue multimeter for general purposes.
  • Mirrored needle indicator with an accurate reading.
  • Check both AC and DC parameters with continuity buzzer on Ohms.
  • Up to 1000V on both AC and DC Voltage.
  • 19 versatile ranges for general-purpose testing.
  • Fuse & Diode protection.
  • Compact sizing.
  • Tilt back-stand.
  • The large and mirrored scale of 80mm length.

1,200

Compare

8 Function 19 Range Analog Multimeter YX360-TRE-B

The YX-360TRE-B is an analogue multimeter, you can use it to measure AC/DC voltage, DC current, resistance, diode check, continuity. This YX360TREB analog meter can also measure transistor leak current, for DC current. This voltmeter analog dc can measure as low as 10 microamps and up to 250 mA, which is hard to do with a digital multimeter.

Category:

Specifications Of Best Analog Multimeter YX-360-TRE-B:

  1. DCV: 0 – 0.1V ±1% 0.25V/2.5/10V/50­V/250/1000 ±3%
  2. ACV: 0 -10/50/250/1000V­ ±4%
  3. DCA: 0 – 50µA/2.5mA/25mA/­250mA ±3%
  4. Resistance: 0 – 2K/20K/200K/2M/2­0Mohm ±3%
  5. dB: -10 dB – 22 dB
  6. Diode check out (including LED)
  7. Continuity: the one and the other Buzzer
  8. DC/AC sensitivity: 20kOhm
  9. Battery: AA (not included)
  10. Dimensions: 7.7 x 3.6 x 2.2 inches
  11. Net Weight: approx. 12 ounces

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ANALOG METER YX 360TR BS”

There are no reviews yet.

  • TDR-420 Time Domain Reflectometer/ Cable Fault Locator

    0 out of 5
    (0)

    Product features

    • Possibility damage-free location of impedance changes of tested cables and wires such as:
      • shorted conductor,
      • open conductor / end of cable – useful during the inventory of warehouses and stores,
      • splice,
      • splitter,
      • water ingress,
      • wet splice,
      • bridge tap
      • or other changes.
    • Single measurement mode ONCE,
    • Continuously measurement mode CONT,
    • Tone signal generator TONE,
    • Two cursors to mark two places of damage along with an indication of the distance between them,
    • Built-in HELP function for easier interpretation of the reflectogram,
    • 11 available measuring ranges from 7 m to 6000 m,
    • „dead zone” limited to 0.6 m,
    • Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
    • manually set of sensitivity in 8 steps GAIN,
    • output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
    • Velocity of Propagation set in range from 10% to 99%,
    • tight and durable housing with IP67 ingress protection degree.
    • Small size and weight.
    SKU: n/a
  • UT377A Wood Moisture Meter

    0 out of 5
    (0)

    UT377A is a digital meter designed to measure the moisture content of wood, paper, plywood, and other wooden materials. This device classifies wood into four categories based on material density, and applies temperature compensation algorithm to ensure measurement accuracy. UT377A’s miniature design, low power consumption, and high precision all make this a great product choice for measuring wood moisture content.

    SKU: n/a
  • DT 9205B+ DMM

    0 out of 5
    (0)

    Notes: Notes:
    1. Due to the difference between monitors, the picture may not reflect the actual color of the item.
    We guarantee the style is the same as shown in the pictures.
    2. Due to different personal measurement techniques, there may be 1-3 cm error of the physical.
    Thank you very much!

    SKU: n/a
  • JM 8176 TOOL KIT

    0 out of 5
    (0)

    Minimum Order Quantity: 40

    We devoted our heart to designing this precision bit set to achieve greater practicality.

    One precision bit set includes 93 driver bits and 9 sockets.

    It has CR-V chrome-vanadium steel bits with nickel-plated surface hardness up to 52°.
    Additionally, our precision bit set is equipped with various auxiliary tools to help you better complete the maintenance work.

    SKU: n/a
  • YH 929D V ELECTRIC VACUUM DESOLDERING IRON

    0 out of 5
    (0)

    About this item

    • This 929D-V desoldering iron integrates soldering iron and desoldering pump, you can enjoy the single-handed and continuous desoldering with its short charging handle to rid the hassle of changing grip positions. If you are looking to purchase a desoldering tool that can handle the desoldering jobs of through-hole components and removing excess solder (solder bridges) without jamming up, this is a great choice.
    • This is a plug-n-play desoldering iron. Plug in the power plug, allow the desoldering iron to preheat for approximately 3 minutes, and you are ready to go. YIHUA exclusive heating system combined with a strong desoldering pump ensures you experience uninterrupted desoldering.
    • Different from the traditional use-and-throw desoldering irons, the 929D-V can be used, easily cleaned, and reused. You can lift and pull out the scrap solder storage tube and clean the solder out like a breeze. Meanwhile, we also included 2 different and interchangeable diameters (φ1.0mm & φ1.2mm) desoldering nozzles for different sizes of through-hole components. NOTE: change the nozzle after the desoldering iron has cooled completely.
    • This desoldering iron comes with a heat deflector at the end of the heating element, and this prevents the excess heat from transferring onto the hand when desoldering continuously. You can desolder joints after joints without your hands feeling uncomfortably hot.
    • Choose YIHUA with Confidence – Our US-exclusive 12-month manufacturer warranty will apply to your purchase. Plus, our team is providing professional assistance 24/7 on Amazon. NOTE: This model only works on 110-127V with its USA plug. This product contains electrical insulator protective material (mica), it is normal for the product to emit white fumes for no longer than 20 minutes on first use. This is a normal and intended occurrence for this product, please rest assure for safe usage.
    SKU: n/a