-9%

UTG932E Function/Arbitrary Waveform Generator

Availability:

5 in stock


Specifications
Model UTG932E
Channel 2
Max frequency 30MHz
Sampling rate 200MS/s
Vertical resolution 14 bits
Waveforms Sine, square, pulse, ramp, noise, DC, arbitrary
Sweep modes Logarithmic, linear
Frequency Characteristics
Sine 1μHz~30MHz
Square 1μHz~15MHz
Ramp 1μHz~400kHz
Pulse 1μHz~15MHz
Arbitrary 1μHz~10MHz
Resolution 1μHz
Accuracy Within 90 days ± 50ppm
Within 1 year ± 100ppm
18℃~28℃
Output Characteristics
Impedance 50Ω/High Z
Amplitude range 1mVpp~10Vpp (50Ω); 2mVpp~20Vpp (high Z)
DC offset range (AC+DC) ±5V (50Ω); ±10V  (high Z)
Amplitude resolution 1mV
General Characteristics
Power 100~240VAC, 50Hz/60Hz
Display 4.3”TFT LCD (480×272)
Product color White and grey
Product net weight 0.33kg
Product size 172mm x 90mm x 68mm
Standard accessories USB interface cable, power cord, BNC cable with alligator clips
Standard individual packing Carton box
Standard quantity per carton 4pcs
Standard carton measurement 435mm x 360mm x 125mm
Standard carton gross weight 3.8kg

50,400 55,685

5 in stock

Compare

● Output waveforms: Sine, square, pulse, ramp, noise, DC, arbitrary

● Output frequency range: 1μHz-30MHz/60MHz
● High-accuracy, broad-band 6 bit frequency counter, range: 100mHz~100MHz
● Two equivalent-performance channels
● 4.3 inches TFT LCD
Weight 0.4 kg
Dimensions 17 × 9 × 7 cm

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UTG932E Function/Arbitrary Waveform Generator”

There are no reviews yet.

Vendor Information

  • No ratings found yet!
  • YH 853D+5A ALL IN ONE REWORK STATION

    0 out of 5
    (0)

    1. The power supply is high-precision DC power supply with Constant Voltage and Current, output voltage:0-30V DC adjustable, output current :0-5A adjustable, Power supply with overload protection, high accuracy, reliability, designed for scientific research, product development, laboratories, schools, portable computer repair, electronics production lines etc.

    2. Enhanced safety features. Full intelligence self-detection functions on air gun and iron to provide safe operation mode.

    3. The air gun automatically enters standby when the temperature is less than 70oC thresho.

    4. With short circuit, open circuit, over-temp and over-load protection.

    5. Automatic cooling function for effectively prolonging the heater’s life and protecting the hot air gun.

    SKU: n/a
  • YIHUA 947-III SOLDERING IRON

    0 out of 5
    (0)

    Model :947-III

    Power supply voltage :110V 60HZ/220V 50HZ

    Power:≤60W

    Temperature range:220-480℃

    Temperature stability:±1℃(static state)

    SKU: n/a
  • YH 938D SMD STATION

    0 out of 5
    (0)

    1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.

    2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.

    3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.

    4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
    5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.

    SKU: n/a
  • ,

    YH 947-I Soldering Iron

    0 out of 5
    (0)

    1. Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel. While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively.

    2.Electric iron overall stability is much higher.

    3. Energy-efficient, while rapid heating, cutting temperature recovery performance.

    4. With thermostat circuit, thermostat range 220 °C-480 °C. Users can very easily adjust the settings as needed.

    5. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.

    6. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.

    7. Adopt a common device design, easy to replace devices

    SKU: n/a
  • YH 899D REWORK STATION

    0 out of 5
    (0)
    Power consumption 700W
    Gun temperature 100-480oC
    Gun type Brushless fan
    Air flow 120L/MIN
    Gun heater material Ferro-alloys
    Gun heater resistance 74Ω
    Soldering iron temperature range 200-480oC
    Soldering iron type Blue type
    Soldering iron cable Silicagel line
    Soldering iron heater material high-quality heater
    Soldering iron heater resistance 15Ω
    Inner box dimension(cm) 29*20*18
    Outer box dimension(cm) 59.5*41*36
    Outer carton box Q’TY 8PCS/CTN
    Prodcut weight 2.75KG/PC
    SKU: n/a
  • MF 15 Analog Multimeter

    0 out of 5
    (0)

    Multimeter is a rectifier type moving coil instrument designed for radio servicing and electrical measurement of DC current voltage and AC current voltage. output lever, capacitor and inductor

    SKU: n/a