-11%

Battery Load Tester – BT 100A


  • Sleek Design Silver Metal Body

  • Easy To Use
  • Convenient portable size and easy-to-read scales
  • Tests batteries on or off the car in just 10 seconds
  • Determines good/bad status with an extra-large display with zero adjust
  • Determines state-of-charge cranking and charging volts
  • Works on both 6 Volts and 12 volts batteries

5,264 5,923

Compare
KEY FEATURES
  • Sleek Design Silver Metal Body
  • Easy To Use
  • Convenient portable size and easy-to-read scales
  • Tests batteries on or off the car in just 10 seconds
  • Determines good/bad status with an extra-large display with zero adjust
  • Determines state-of-charge cranking and charging volts
  • Works on both 6 Volts and 12 volts batteries
Category:
Weight 0.7 kg
Dimensions 14 × 7 × 5 cm

TITAN BATTERY TESTER BT 100 A CAN BE USED TO TEST 6V AND 12 BATTERY SYSTEMS.IT CAN GENERATE LOAD JUNK LOAD UPTO 90A DC.UPTO 200A BATTERIES CAN BE TESTED.

WHAT’S IN THE BOX?

1 x BT 100 A
1 x MANUAL

Brand

TITAN

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Battery Load Tester – BT 100A”

There are no reviews yet.

  • UT207B 1000A True RMS Digital Clamp Meter

    0 out of 5
    (0)

    1. Flashlight button: Short press thisbutton to turn on/off the flashlight.
    2. Flexible current probe (optional) to extendthe AC current measurement range to3000A
    3. Inrush current capture
    4. NCV Multi-Segment Display and audio/visual alarm
    5. True RMS/Auto backlight
    6. NCV/Function retention

    SKU: n/a
  • LKZ-720 Wires and pipe locator

    0 out of 5
    (0)

    Features:

    • the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
    • phase detection mode,
    • receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
    • a LED bright torch,
    • headphone socket in receiver,
    • screens backlight for work in dark,
    • transmission battery status and settings of the transmitter to the receiver
    • operation in wide range of rated voltage, up to 500V RMS,
    •  measurement of voltage at the object to 500 Vrms,
    • three levels of transmitter amplification,
    • automatic or manual selection of transmitter operation modes,
    • five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
    • software upgrade via USB,
    • additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
    SKU: n/a
  • UT325 Contact Type Thermometer

    0 out of 5
    (0)
    SKU: n/a
  • UT283A Single Phase Power Quality Analyzer

    0 out of 5
    (0)

    1. Trend/event capture

    2. Harmonics/inrush current measurement
    3. File management through USB interface
    4. Flick measure (PST/PLT values)
    5. User friendly interface
    6. Multimeter functions
    7. Scope functions including waveform display
    8. 3.5 inches 64K color TFT LCD display
    9. THD (Total Harmonic Distortion) function
    10.Long-term monitoring
    SKU: n/a
  • UT-CS09D Flex Clamp Sensor

    0 out of 5
    (0)

    Features of UT-CS09D Flex Clamp Sensor

    Certificates: CE, UKCA, cETLus

    ● Flex clamp can measure from 1.5A to 3000A current

    ● 1m drop proof
    ● Robust terminal connection
    ● Directly displays current when connected to UT206B/208B
    SKU: n/a
  • MECHANIC halogenfree flux paste UV80 [60G]

    0 out of 5
    (0)

    Containing high quality rosin, the use of acid – free flux refined,

    semi – solid is not easy to dump

    Non – corrosive, easy to weld, quick cleaning and good insulation, no acid

    SKU: n/a