- Digital Clamp Meter
- 31/2LocationDigit,Maximum displayMAXDisplay:1999,Data HoldDH
- OverloadOverLoadProtection
- Maximum jaw openingMAXexpand of the pincers:30mm
Clamp Meters
Clamp Meter BM 528A
- Digital Clamp Meter
- 31/2LocationDigit,Maximum displayMAXDisplay:1999,Data HoldDH
- OverloadOverLoadProtection
- Maximum jaw openingMAXexpand of the pincers:30mm
- Off testCONTINUITY
- BUZZER
- diodeDIODE
₨2,500 ₨3,052
Weight | 0.3 kg |
---|---|
Dimensions | 22 × 7 × 3 cm |
DIGITAL CLAMP MULTIMETER
31/2 Digit, MAX Display:1999,
Auto power off
DH
Over Load Protection
Battery power is insufficient
MAX expand of the pincers:30mm
DCV:20V±0.8%±2, 600V±1%±3
ACV:600V±1.5%±5
ACA:20/200/600A±1.9%±5
RESISTANCE:2KΩ±1.0%±3,2MΩ±1.0%±5
CONTINUITY BUZZER
DIODE
POWER SUPPLY:6F22 or NEDA 9V×1
SIZE:221×75×31mm
WEIGHT: about 240g(Include battery)
Based on 0 reviews
Be the first to review “Clamp Meter BM 528A”
-
Clamp Meters
UT216D 600A True RMS Digital Clamp Meter
1. True RMS
2. Auto range, 3 times/s sampling rate3. MAX/MIN/Relative modes4. K-type temperature probe5. Flashlight6. 400Hz measurement7. NCV, non-contact AC voltage testing8. VFC, low pass filter9. Zeroing function10. Inrush current11. Analog bar graphSKU: n/a -
DC Power Supplies
TITAN TN 305DS DC Power Supply
Operating Conditions
Supply power: AC 220-240V, 50Hz/60Hz.
Working Temperature: -10°C ~ 40 °C
Relative Humidity: ‹ 90%
Storage Conditions: -10°C ~ 40 °C
Relative Humidity: ‹ 80%
Stable Voltage
The output voltage is between 0 and nominal value continuously adjustable
Voltage Stability: ≤0.01% +2mV
Load Stability: ≤ 0.01% +2mV
Recovery Time: ≤100µS
Temperature Coefficient: ≤ 200PPM/°C
Ripple Noise: ≤1 MVRMS(RMS)
Stable CurrentPower Stability: 0.1% + 3mA
Load Stability: 0.2% + 3mA
Ripple Noise : ≤2mArms(RMS)
The output current is between 0 and nominal value continuously adjustable
SKU: n/a -
Power Quality Analyzer
UT285C Three Phase Power Quality Analyzer
1. Waveform real-time display (4 channels voltage/4 channels current).
2. True RMS values of voltages and currents3. Peak current and voltage values4. Total harmonic distortion (THD)5. Active, reactive, apparent power, by phase and cumulative6. Transformer K factor7. Power factors (PF) and displacement factors (DPF or COSΦ)8. Short-term voltage flicker (PST)9. Three phase unbalance(current and voltage)10. USB interface/PC softwareSKU: n/a
There are no reviews yet.