- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
Clamp Meters
Clamp Meter DT 3266
Availability:
Out of stock
- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
₨811 ₨1,308
Out of stock
CompareWeight | 0.3 kg |
---|---|
Dimensions | 15 × 7 × 4 cm |
FUNCTION | MEASURING RANGE | ACCURACY | ||
DCV | 200mv/2v/20v/200v | ±(0.8%+2) | ||
600v | ±(1.0%+2) | |||
400mv/4v/40v/400v | ±(0.8%+2) | |||
600v | ±(1.0%+2) | |||
ACV | 2V/20V/200V | ±(1.0%+5) | ||
600V | ±(1.2%+5) | |||
400mv/4v/40v/400v | ±(1.0%+10) | |||
600V | ±(1.2%+10) | |||
ACA | 2A/20A | ±(3.0%+10) | ||
200A | ±(2.5%+10) | |||
4A/40A/400A | ±(2.5%+10) | |||
600A | ±(1.5%+5) | |||
Ω | 200Ω/2KΩ/20KΩ/200KΩ/2MΩ | ±(1.2%+2) | ||
20MΩ | ±(2.0%+5) | |||
400Ω/4KΩ/40KΩ/400KΩ/4MΩ | ±(1.2%+2) | |||
40MΩ | ±(2.0%+5) | |||
CX | 200uf | ±(4.0%+10) | ||
HZ | 0∞10MHZ | ±(2.0%+5) | ±(1.5%+15) | |
°C | – 20°C ≤ 750°C | ±(2%+2) | ||
FEATURE | ||||
LCD | DIGITS | 1999 | 3999 | |
Clamp Size | Opening | 30mm | 30mm | |
Test Range | Ac voltage/dc voltage/AC-DC current,resistance | • | • | |
Capacitance/frequency/duty cycle/temperature | • | |||
Power | 3X1.5v AAA | |||
Weight | 133.5g | |||
Security | CE,ETL,CATIII 600V ROHS |
Based on 1 review
Add a review
-
-
LCR Meter
UT622A Digital Inductance LCR Meter
Specifications UT622A UT622C UT622E Certificates CE, RoHS Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz Test signal level 0.1Vrms, 0.3Vrms, 1Vrms Output impedance 100Ω Measurement parameters Primary: L/C/R/Z
Secondary: D/Q/θ/ESRPrimary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR Auto LCR √ Test terminals Three-terminal test jacks, five-terminal test sockets Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s) DCR test rate — — Fast (20 times/s), medium (5 times/s), or slow (2 times/s) Ranging mode Auto/hold Tolerance range 1%~20% Testing circuit mode Series/parallel mode Clearing correction Open/short circuit Fuse of test ports 0.1A/250V Communication interface Mini-USB LED alarm for tolerance
(pass: green; fail: red)√ √ √ Display range Maximum reading 99999 Minimum resolution 0.0001 Maximum accuracy 0.001 L 0.00μH~99.999H C 0.00pF~99.999mF Z/R 0.0000Ω~9.9999MΩ ESR 0.0000Ω~999.99Ω D 0.0000~9.9999 Q 0.0000~99999 θ -179.9°~179.9° DCR — — 0.01mΩ–20.000MΩ Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) General Characteristics Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A Display 2.8′ TFT LCD 320X240 Product net weight 420g Product size 93mm x 192mm x 44mm Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual SKU: n/a -
Multimeters
Fluke 18B+ Digital Multimeter
Feature:
-New Function:Frequency Test
-New Desgin: A Large LCD than FLUKE 18B, with a high brightness LCD Back light
-Two Mode LED Test :
-DMM LED Socket Test Mode .
-UUT(PCBA) LED Test Mode(using test lead).
-Light up LED without considering the polarity.
-Voltage,Resistance,Continuity Testing,Capacitance Test.
-Data Hold,Diode Test.
-Frequency and Duty Cycle.
-MAX Input Current 10A.
SKU: n/a
Zafar Ayyub –
Dt3266 clampmeter
Zafar Ayyub –