- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
Clamp Meter DT 3266
Out of stock
- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
₨811 ₨1,308
Out of stock
CompareWeight | 0.3 kg |
---|---|
Dimensions | 15 × 7 × 4 cm |
FUNCTION | MEASURING RANGE | ACCURACY | ||
DCV | 200mv/2v/20v/200v | ±(0.8%+2) | ||
600v | ±(1.0%+2) | |||
400mv/4v/40v/400v | ±(0.8%+2) | |||
600v | ±(1.0%+2) | |||
ACV | 2V/20V/200V | ±(1.0%+5) | ||
600V | ±(1.2%+5) | |||
400mv/4v/40v/400v | ±(1.0%+10) | |||
600V | ±(1.2%+10) | |||
ACA | 2A/20A | ±(3.0%+10) | ||
200A | ±(2.5%+10) | |||
4A/40A/400A | ±(2.5%+10) | |||
600A | ±(1.5%+5) | |||
Ω | 200Ω/2KΩ/20KΩ/200KΩ/2MΩ | ±(1.2%+2) | ||
20MΩ | ±(2.0%+5) | |||
400Ω/4KΩ/40KΩ/400KΩ/4MΩ | ±(1.2%+2) | |||
40MΩ | ±(2.0%+5) | |||
CX | 200uf | ±(4.0%+10) | ||
HZ | 0∞10MHZ | ±(2.0%+5) | ±(1.5%+15) | |
°C | – 20°C ≤ 750°C | ±(2%+2) | ||
FEATURE | ||||
LCD | DIGITS | 1999 | 3999 | |
Clamp Size | Opening | 30mm | 30mm | |
Test Range | Ac voltage/dc voltage/AC-DC current,resistance | • | • | |
Capacitance/frequency/duty cycle/temperature | • | |||
Power | 3X1.5v AAA | |||
Weight | 133.5g | |||
Security | CE,ETL,CATIII 600V ROHS |
Based on 1 review
Add a review
-
Soldering Iron
Mechanic Special Solder Paste XG-50 35G 183°C
This is solder paste for soldering small SMD components in a reflow oven or with a hot air soldering station. comes in a small container for prototyping or repairing job.This pack is the right amount of solder paste for most hobby projects. This paste is the replacement for solder wire used in Through-hole soldering, some times solder flux is referred to as solder paste.
SKU: n/a -
-
Usb Tester
UT658C USB Testers
Features of UT658 Series USB Testers
Certifications: CE, UKCA
● Type-A/C interface
● CE certification
● 10 sets of data storage
● Loop equivalent resistance measurement (1-480Ω)
● Same screen shows voltage, current, power, capacity, etc.
● Support fast charge protocol
SKU: 0000 -
Moisture Testers
UT377A Wood Moisture Meter
UT377A is a digital meter designed to measure the moisture content of wood, paper, plywood, and other wooden materials. This device classifies wood into four categories based on material density, and applies temperature compensation algorithm to ensure measurement accuracy. UT377A’s miniature design, low power consumption, and high precision all make this a great product choice for measuring wood moisture content.
SKU: n/a -
Clamp Meters
UT206A+
1. 1000A AC current measurement
2. 1000V AC/DC voltage measurement
3. 600A inrush current measurement (UT206A+)
4. Temperature (UT206A+)
5. NCV (UT206A+)
6. ACV frequency 10Hz~10kHz
7. Jaw opening: 45mm
8. Resistance / capacitance / frequency measurement
9. Auto range / backlight / low battery indication
10. Continuity / diode / duty cycle
11. MAX/MIN
12. Data hold / flashlight / relative mode
13. Auto power off
14. CAT II 1000V/CAT III 600VSKU: n/a
Zafar Ayyub –
Dt3266 clampmeter
Zafar Ayyub –