-
×
UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test
- Vendor:
superworld
Subtotal: ₨76,800
-38%
Clamp Meters
Clamp Meter DT 3266
Availability:
Out of stock
- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
₨811 ₨1,308
Out of stock
Compare- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
| Weight | 0.3 kg |
|---|---|
| Dimensions | 15 × 7 × 4 cm |
| FUNCTION | MEASURING RANGE | ACCURACY | ||
| DCV | 200mv/2v/20v/200v | ±(0.8%+2) | ||
| 600v | ±(1.0%+2) | |||
| 400mv/4v/40v/400v | ±(0.8%+2) | |||
| 600v | ±(1.0%+2) | |||
| ACV | 2V/20V/200V | ±(1.0%+5) | ||
| 600V | ±(1.2%+5) | |||
| 400mv/4v/40v/400v | ±(1.0%+10) | |||
| 600V | ±(1.2%+10) | |||
| ACA | 2A/20A | ±(3.0%+10) | ||
| 200A | ±(2.5%+10) | |||
| 4A/40A/400A | ±(2.5%+10) | |||
| 600A | ±(1.5%+5) | |||
| Ω | 200Ω/2KΩ/20KΩ/200KΩ/2MΩ | ±(1.2%+2) | ||
| 20MΩ | ±(2.0%+5) | |||
| 400Ω/4KΩ/40KΩ/400KΩ/4MΩ | ±(1.2%+2) | |||
| 40MΩ | ±(2.0%+5) | |||
| CX | 200uf | ±(4.0%+10) | ||
| HZ | 0∞10MHZ | ±(2.0%+5) | ±(1.5%+15) | |
| °C | – 20°C ≤ 750°C | ±(2%+2) | ||
| FEATURE | ||||
| LCD | DIGITS | 1999 | 3999 | |
| Clamp Size | Opening | 30mm | 30mm | |
| Test Range | Ac voltage/dc voltage/AC-DC current,resistance | • | • | |
| Capacitance/frequency/duty cycle/temperature | • | |||
| Power | 3X1.5v AAA | |||
| Weight | 133.5g | |||
| Security | CE,ETL,CATIII 600V ROHS | |||
Brand
SZBJ
Based on 1 review
Add a review
-
Analog Multimeters
ANALOG MULTIMETER MF 47A
Features:
1. Multifunctional, can measure ac/dc voltage, dc current, resistance, battery test, capacitance, hfe. 2. Buzzer alarm: when it is below 50, it will wake up the alarm. 3. Battery Test: Large measuring range of 1.2-3.6v. 4. Accurate and Reliable: Clear dial, clear measurement results and high efficiency. 5. Audio Level Meter: Designed to measure amplifier gain and transmission losses with given impedant load and the measurement unit is db.
SKU: n/a -
Corbon Mono Oxide Meter
Uni-T UT337 Carbon Monoxide Meter
Suitable for use everywhere from in the house to restaurants, offices and industrial areas, the UT337A measures the exact value of carbon monoxide (CO) present in the air. Featuring a built-in sensor integrated into the top of the unit, the UT337A measures CO content from 0-1000ppm with accuracy of ±5% (5ppm) and resolution of 1ppm. The sensor is also designed to adjust rapidly to changes, ensuring you always get a stable, accurate reading. When CO levels exceed a certain threshold, the UT337A will alert the user by using a combination of audible and LED light indicators. The alarm is configurable to the user’s specification and it is also possible to use this meter to calculate temperature values.
SKU: n/a -
Clamp Meters
TITAN Clamp Multimeter TN88A in Pakistan
Specifications:
- TITAN TN88A Digital Clamp Meter 500V Insulation Tester
- DC voltage: 1000V ± (0.8% + 2)
- AC voltage: 750V ± (1.2% + 4)
- Alternating current: 200A / 1000A ± (2.5% + 5)
- Resistance: 200Ω / 20kΩ ± (1.0% + 2)
- Insulation test 100kΩ to 2000MΩ (with option 500V insulation tester unit)
- High Resistance: 20MΩ / 2000MΩ ± (5.0% + 2)
- The continuity of the alarm
- Low screen voltage
- Data retention
- Input impedance: 10MΩ
- Sampling rate: 3 times / s
- Maximum display: 1999
- Jaw opening: 50mm
SKU: n/a -
Wire & Cable Testers
MS6812 Cable Tracker
The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker
● Sound and Light Instruction
● Cont and Tone LED LightApplications
– Judge Continuity of the Cables or Wires
– Track the Cables or Wires, and Diagnose the Break Point
– Receive the Tone Signal on the Cables or Wires(Telephone Line)
– Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
– Send a Single Solid or a Dual Alternating Tone to the Target Cables or WiresSKU: n/a -
DC Power Supplies
YIHUA 3010D DC Power supply
This model has compact design with all metal construction.
1.This unit now features a Dual LED display with highly accurate LED digital readout.
2.Maximum output is 30V at 10A.
- High stabilized output voltage.
- Short circuit protection.
5.Over loading and current protection.
SKU: n/a
Related products
-
Clamp Meters
MS 2109A ACA DCA Digital Clamp Meters
● Display 6000 counts
● Jaw Opening Ф26mm/1.0″
● Auto Ranging
● Auto Power Off
● Non-Contact Voltage Detector
● Relative Measurement
● Diode Open Volatge 2.7V
● Continuity Buzzer <50±20Ω
● MAX/MIN
● Data Hold
● Display Backlight
● Work Light
● Low Battery DisplaySKU: n/a -
Clamp Meters
UT220 2000A ACA Digital Clamp Meters
UT220 series is a stable, safe and reliable3 1/2 AC and DC Digital Clamp Meters, full range overload protection and unique appearance design, which becomes more superior performance of electrical instruments. It is suitable for smelt, manufacturing, petroleum, electricpower, chemical industry etc. It’s an ideal tool for the maintenance and repair of the circuit, power equipment.
SKU: n/a -
Clamp Meters
UT219DS ACA DCA Professional Clamp Meters with Motor LPF Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust.
- The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage.
- UT-219DS is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
Clamp Meters
UT213C ACA DCA Digital Clamp Meters
Main Features
1. 10A/400A AC/DC measurement with Hall-effect sensor
2. Auto range makes measurement faster and more effective
3. 4000 display count, 3/s sampling rate
4. True RMS measurement
5. NCV, Non-Contact AC Voltage testing
6. Frequency and duty ratio measurement
7. MAX/MIN mode
8. Relative mode
9. Flashlight function for measuring at night or in the dark
10. K-type point contact temperature probe for temperature measurement
11. Large jaw of 30mm
12. Data hold
13. LCD backlight
14. Auto power off
15. 1m drop proof
16. Complies with CE (European Union) directives
SKU: n/a
Zafar Ayyub –
Dt3266 clampmeter
Zafar Ayyub –