- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
Clamp Meter DT 3266
Out of stock
- clamp multimeter
- Performs AC/DC Voltage, AC current, Resistance, Audible Continuity, Diode
- Temperature Measurements, and non-contact ACV Detect (NCV) as well as Capacitance, Hz, etc.
- Auto Ranging DMM with AC current clamp meter function
₨811 ₨1,308
Out of stock
CompareWeight | 0.3 kg |
---|---|
Dimensions | 15 × 7 × 4 cm |
FUNCTION | MEASURING RANGE | ACCURACY | ||
DCV | 200mv/2v/20v/200v | ±(0.8%+2) | ||
600v | ±(1.0%+2) | |||
400mv/4v/40v/400v | ±(0.8%+2) | |||
600v | ±(1.0%+2) | |||
ACV | 2V/20V/200V | ±(1.0%+5) | ||
600V | ±(1.2%+5) | |||
400mv/4v/40v/400v | ±(1.0%+10) | |||
600V | ±(1.2%+10) | |||
ACA | 2A/20A | ±(3.0%+10) | ||
200A | ±(2.5%+10) | |||
4A/40A/400A | ±(2.5%+10) | |||
600A | ±(1.5%+5) | |||
Ω | 200Ω/2KΩ/20KΩ/200KΩ/2MΩ | ±(1.2%+2) | ||
20MΩ | ±(2.0%+5) | |||
400Ω/4KΩ/40KΩ/400KΩ/4MΩ | ±(1.2%+2) | |||
40MΩ | ±(2.0%+5) | |||
CX | 200uf | ±(4.0%+10) | ||
HZ | 0∞10MHZ | ±(2.0%+5) | ±(1.5%+15) | |
°C | – 20°C ≤ 750°C | ±(2%+2) | ||
FEATURE | ||||
LCD | DIGITS | 1999 | 3999 | |
Clamp Size | Opening | 30mm | 30mm | |
Test Range | Ac voltage/dc voltage/AC-DC current,resistance | • | • | |
Capacitance/frequency/duty cycle/temperature | • | |||
Power | 3X1.5v AAA | |||
Weight | 133.5g | |||
Security | CE,ETL,CATIII 600V ROHS |
Based on 1 review
Add a review
-
Clamp Meters
UT211B 60A Mini Clamp Meter
UT211B 60A mini clamp meter is a high precision tool designed with the resolution of 0.1mA. UT211B is perfect for anyone requiring high precision and accurate results when working with electronics, such as troubleshooting solar power systems current load, electrical cars, etc. It is ergonomically designed and also lightweight, making it a convenient tool for working in tight spaces.
SKU: n/a -
-
Phase Detector Meters
UT262A Non-Contact Phase Detector
UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.
SKU: 22000 -
Clamp Meters
CMP-1006 Digital Clamp-on multimeter
Additionally:
- safe, insulated measuring clamps,
- autoranging/manual range selection,
- DATA HOLD function, for holding measured values,
- backlit LCD,
- DC ZERO mode of measurement for DC current, possibility to zero the display and reading relative actual value less stored zero value,
- MAX/MIN function,
- over range indication,
- AUTO-OFF function.
SKU: n/a
Zafar Ayyub –
Dt3266 clampmeter
Zafar Ayyub –