-45%

Digital Clamp Meter Tester Multimeter Tang Ampere AC DC DM6266


1,500 2,725

Compare

Digital Clamp Meter Tester Multimeter Tang Ampere AC DC DM6266

This meter features a portable design, 31/2 LCD display and 55mm jaw opening, which can provides various measurements for AC/DC voltage, AC current, resistance, continuity buzzer, and 261 option (500V) insulation test. It is also with functions of date hold, low battery indication, overload indication, etc. More detailed product information, please refer to the English manual. With 55mm jaw opening. Portable design, easy to use.

Category:

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “Digital Clamp Meter Tester Multimeter Tang Ampere AC DC DM6266”

There are no reviews yet.

  • UNI-T UT332+ Digital Temperature Humidity Meter

    0 out of 5
    (0)

    1. Features of UT332+ Temperature Humidity Meter

    ● ℃/℉ selection

    ● Response time: around 1 second
    ● Humidity offset settings
    ● Temperature offset settings
    ● Dew point offset settings
    ● Wet-bulb temperature offset settings
    ● Auto power off
    ● Data hold/data recall
    ● MAX/MIN
    ● Auto record time setup
    ● LCD backlight
    ● USB interface for data and power
    SKU: n/a
  • UT658B USB Tester

    0 out of 5
    (0)

    UT658 series USB testers are used to inspect USB chargers and portable power source of electronics products. UT658 series can output voltage, current, and power. Users can use these devices to monitor charging status of  any USB powered device.

    SKU: n/a
  • UT658LOAD USB Testers

    0 out of 5
    (0)

    Features of UT658 Series USB Testers

    Certifications: CE, UKCA

    ● Type-A/C interface

    ● CE certification

    ● 10 sets of data storage

    ● Loop equivalent resistance measurement (1-480Ω)

    ● Same screen shows voltage, current, power, capacity, etc.

    ● Support fast charge protocol

    SKU: n/a
  • YH 939D+ III EFFICIENT SOLDERING STATION

    0 out of 5
    (0)

    Manufacturer info:

    1.Three storage sections:CH1/CH2/CH3, each storage segment can store all the features of the current

    machine (eg:temperature, iron sleep time,which is currently on display all function values can

    be stored), you can quickly switch between each storage segment.

     

    2. Master the core technology, SAMSUNG MCU the PID procedures to high-speed 100ms cycle real-time tracking of the temperature of the iron tips, and real-time correction, the magic temperature compensation speed, to make it more stable temperature, the temperature error is smaller and able to adapt to a variety of harsh environment.

    3.The use Hakko heater, addition to suitable for general small solder joints ,also particularly suitable for large desoldering, solder joints, hybrid hard solder desoldering;
    4. Anti-static design, which can effectively avoid damage to delicate components;
    5. It has automatically detects the failure and alarm function
    6. Use bran-new sturdy mold manufacturing, pressure-resistant anti-fall; blue ferroalloy Iron holder and durable.
    7. The handle line is silicone line, high temperature resistance, good flexibility (300 ° C iron tips touch silicone line 30s without damage)
    8. Sleep function , Automatic shutdown function , Celsius / Fahrenheit function
    a), Sleep function soldering iron automatic detection of their work status are not in use in a quiescent state, arriving to set the sleep time, the temperature of the iron automatically lower the temperature to 200 ° C enter into sleep state, can effectively prevent the oxidation of iron head and prolong the iron tip service life, energy saving and environmental protection. The sleep time can be set range 0 to 99 minutes in 1 minute steps, users can be set based on usage, if you do not need a soldering iron sleep ,the sleep time is set to 0.
    b) Automatic shutdown function after soldering iron enter into sleep state, start the timer program, set the shutdown time did not wake up from sleep, automatic shutdown, energy saving and environmental protection. Auto power off time setting range 0 to 99 minutes in 1 minute steps.
    c) Celsius / Fahrenheit temperature display function designed to meet the market needs of the different regions of the temperature display mode.

    9.The panel is different from traditional,used  aluminum alloy material,with new appearance design and improved performance .

    10.The silvery knob give the users high-end and specialty sensor.

    What’s in the box: main unit + power chord, manual, soldering iron with tip (900M-T type), holder with brass wool tip cleaner.

    SKU: n/a
  • A37 CO2 Meter

    0 out of 5
    (0)

    Main Features

    1. Automatic baseline correction

    2. Audible and visual alarm

    3. Low battery indication

    4. Auto power off

    5. Backlight

    SKU: n/a