-
×
UT71C Intelligent Digital Multimeters
- Vendor:
superworld
Subtotal: ₨34,500
-12%
Multimeters
CMM-40 Industrial Multimeter
Availability:
5 in stock
The most important features of CMM-40 are:
- autoranging/manual range selection,
- „DATA HOLD” function, for holding measured values,
- „REL” function, which allows you to make measurements relative to a stored reference value,
- „MAX/MIN” function,
- „PEAK HOLD” function,
- memory for 2000 measurement resultS,
- continuity test with acoustic signalling (beeper),
- „AUTO-OFF” function,
- display 4¾ digits (40000 max),
- double molded, waterproof casing.
₨30,270 ₨34,221
5 in stock
CompareIndustrial multimeter CMM-40 was designed for the purpose of measurements of AC/DC voltage, AC/DC current, resistance, capacitance, frequency (electrical and electronic), duty cycle, temperature and also for testing diodes and continuity.
| Weight | 0.4 kg |
|---|---|
| Dimensions | 19 × 8 × 5 cm |
Frequency measurement (electronic)
| Range | Resolution | Accuracy |
| 40,000 Hz | 0,001 Hz | ±(0,1% m.v. + 1 digit) |
| 400,00 Hz | 0,01 Hz | |
| 4,0000 kHz | 0,0001 kHz | |
| 40,000 kHz | 0,001 kHz | |
| 400,00 kHz | 0,01 kHz | |
| 4,0000 MHz | 0,0001 MHz | |
| 40,000 MHz | 0,001 MHz | |
| 100,00 MHz | 0,01 MHz | not speccified |
- Sensitivity: 0.8 V rms min. @ 20% to 80% duty cycle and <100 kHz; 5 V rms min @ 20% to 80% duty cycle and > 100 kHz
Frequency measurement (electrical)
| Range | Resolution | Accuracy |
| 40,00 Hz…10,000 kHz | 0,01 Hz…0,001 kHz | ± 0,5% m.v. |
- sensitivity: 1 V rms
Duty cycle measurement
| Range | Resolution | Accuracy |
| 0,10…99,00% | 0,01% | ±(1,2% m.v. + 2 digits) |
- pulse width: 100μs – 100 ms,
- frequency width: 5 Hz…150 kHz.
Temperature measurement
| Range | Resolution | Accuracy |
| -50,0°C…+1200,0°C | 0,1°C | ±(1% m.v. + 2,5°C) |
| -58,0°F…+2192,0°F | 0,1°F | ±(1% m.v. + 4,5°F) |
DC voltage measurement
| Range | Resolution | Accuracy |
| 400,0 mV | 0,01 mV | ±(0,06% m.v. + 4 digits) |
| 4,0000 V | 0,0001 V | |
| 40,000 V | 0,001 V | |
| 400,00 V | 0,01 V | |
| 1000,0 V | 0,1 V | ±(0,1% w.m. + 5 cyfr) |
AC voltage measurement (True RMS)
| Range | Resolution | Accuracy |
| 400,00 mV | 0,01 mV | ±(1% m.v. + 40 digits) |
| 4,0000 V | 0,0001 V | ±(1% m.v. + 30 digits) |
| 40,000 V | 0,001 V | |
| 400,00 V | 0,01 V | |
| 1000,0 V | 0,1 V |
- frequency range: 50…1000 Hz.
AC/DC current measurement (True RMS)
| Range | Resolution | Accuracy |
| 400,00 μA | 0,01 μA | dla DC ±(1,0% m.v. + 3 digits)
dla AC ±(1,5% m.v. + 30 digits) |
| 4 000,0 μA | 0,1 μA | |
| 40,000 mA | 0,001 mA | |
| 400,00 mA | 0,01 mA | |
| 10,000 A | 0,001 A |
- 20 A: 30 sec max with reduced accuracy.
Resistance measurement
| Range | Resolution | Accuracy |
| 400,00 Ω | 0,01 Ω | ±(0,3% m.v. + 9 digits) |
| 4,0000 kΩ | 0,0001 kΩ | ±(0,3% m.v. + 4 digits) |
| 40,000 kΩ | 0,001 kΩ | |
| 400,00 kΩ | 0,01 kΩ | |
| 4,0000 MΩ | 0,0001 MΩ | |
| 40,000 MΩ | 0,001 MΩ | ±(2,0% m.v. + 10 digits) |
Capacitance measurement
| Range | Resolution | Accuracy |
| 40,000 nF | 0,001 nF | ±(3,5% m.v. + 40 digits) |
| 400,00 nF | 0,01 nF | |
| 4,0000 μF | 0,0001 μF | ±(3,5% m.v. + 10 digits) |
| 40,000 μF | 0,001 μF | |
| 400,00 μF | 0,01 μF | |
| 4000,0 μF | 0,1 μF | ±(5% m.v. + 10 digits) |
| 40,000 mF | 0,001 mF |
Other technical data:
- power supply: 9 V battery type 6LR61
- diode test: I=0,9 mA, U0 = 2,8 V DC
- continuity test: I<0,35 mA, sound signal for R<35 Ω
- over range indication: 0L displayed
- crest factor: ≤ 3 at full scale up to 500 V; decreasing linearly to ≤ 1,5 at 1000 V
- PEAK: captures peaks >1 ms
- sampling rate: 2 times per second
- input impedance: 10 MΩ (V DC), 9 MΩ (V AC)
- display: 40000 counts backlit LCD with bargraph, 4¾ digits
- store capacitance: 2000
- dimensions: 187 x 81 x 55 mm
- weight: 342 g
- fuses: mA, µA range: 0,5 A/1000 V ceramic fast blow; A range: 10 A/1000 V ceramic fast blow
- auto power OFF: 15 min.
- accordance with following standards: EN 61010 – 1:2004, EN 61010 – 2 – 032
Electric security:
- type of insulation: double, according to EN 61010 – 1 and IEC 61557
- measurement category: CAT III 1000 V acc. to EN 61010 – 1:2004
- protection class acc. to EN 60529: IP67
Rated operational conditions:
- operating temperature: 0…+40°C
- storage temperature: -20…+60°C
- operating humidity: max 80% up to 87°F (31°C); decreasing linearly to 50% at 104°F (40°C)
- operating altitude: max 2000 m
„m.v.”- measured value
Brand
SONEL
Based on 0 reviews
Be the first to review “CMM-40 Industrial Multimeter”
-
-
Dc Veriable Loads
UNI-T UTL8211/UTL8212 High-Precision Compact DC Electronic Load Tester Single/Dual Channel 150V Power Supply Current Test – UTL8211
Dc Veriable LoadsUNI-T UTL8211/UTL8212 High-Precision Compact DC Electronic Load Tester Single/Dual Channel 150V Power Supply Current Test – UTL8211
Application:
Power supply test, adapter/charger test, battery test, lithium battery protection board test, ATE, component test, etc., commonly used in home appliance manufacturers, LCD and other computer component manufacturers, switching power supply and LED manufacturers, adapter charger manufacturers and other companies Production and testing use
SKU: n/a -
Clamp Meters
UT221 2000A ACA DCA Digital Clamp Meters
UT221 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a -
Tool Kits
JM-TP03 Double Head Bits Set Screwdriver
Features:
- Set screwdriver
- Consists of 10 PZ2 type nut heads commonly used for electric screwdriver heads
- Equipped with a box to keep the screwdriver head with a lightweight design
- Has a very strong magnetic adhesive
- Material: Chrome vanadium
SKU: n/a
Related products
-
Multimeters
UT71C Intelligent Digital Multimeters
Product Features
1. Can set the interval forauto data recording
2. MAX/MIN/REL measurement mode
3. Peak hold
4. Analogue bar graph
5. Measure AC and DC in the same stall (AC+DC)
6. 4-20mA loop test
7. 45Hz-100kHz frequency response measurement
8. Double backlight
9. Misplug alarm
10. Auto and manual ranges selectable
11. USB interface available
12. Bluetooth connection with a cellphone for data monitoring
13. Temperature measurement mode,equipped with K-type point contact temperature probe
14. Complies with CE (European Union) and UL (United States) directives
SKU: n/a -
-
There are no reviews yet.