-17%

TITAN TN 305DS DC Power Supply

Availability:

8 in stock


Operating Conditions

Supply power: AC 220-240V, 50Hz/60Hz.

Working Temperature: -10°C ~ 40 °C

Relative Humidity: ‹ 90%

Storage Conditions: -10°C ~ 40 °C

Relative Humidity: ‹ 80%

Stable Voltage

The output voltage is between 0 and nominal value continuously adjustable

Voltage Stability: ≤0.01% +2mV

Load Stability: ≤ 0.01% +2mV

Recovery Time: ≤100µS

Temperature Coefficient: ≤ 200PPM/°C

Ripple Noise: ≤1 MVRMS(RMS)
Stable Current

Power Stability: 0.1% + 3mA

Load Stability: 0.2% + 3mA

Ripple Noise : ≤2mArms(RMS)

The output current is between 0 and nominal value continuously adjustable

10,000 12,000

8 in stock

Compare

Product details of TN305D DC Power Supply

  • Model: TN305D
  • Compact Design
  • All Metal Construction
  • Current mA / A Conversion Display
  • CE Approved
  • High Stabilized Output Voltage
  • Short Circuit Protection
  • Over Loading and Current Protection
  • Dual LED Three Digital Tube Display
Category:
Weight 3 kg
Dimensions 30 × 15 × 20 cm

Brand

TITAN

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “TITAN TN 305DS DC Power Supply”

There are no reviews yet.

  • JM Z16 HEAT INSULATION MAT

    0 out of 5
    (0)

     JAKEMY JM-Z16 Magnetic Heat Insulation Silicone anti-static Working Mat for Soldering Assembling Electronics DIY Repair.

    Feature:
    Brand new and high quality.
    Heat-resistant coefficient: 300 Celcius degree (hot wind) / 230 Celcius degree (direct contact).
    Anti-static coefficient: 1*10E12ohm.
    Units design, easy to keep track of parts.
    Food grade material, non-toxic and safe in use. 6. Suitable for electronics devices repairing.

    Accessories:
    Anti-static and heat-proof working mat*1

    SKU: n/a
  • YH S208J PIPE

    0 out of 5
    (0)
    SKU: n/a
  • UNI-T MSO3254E 250MHz Mixed Signal 4 Channel Digital Oscilloscope

    0 out of 5
    (0)
    Analog bandwidth 150MHz 250MHz
    Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital
    Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels)
    Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels)
    Memory depth 70Mpts
    Waveform capture rate 200,000wfms/s
    Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display )
    Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall]
    Input impedance (1MΩ±1%) II (20pF±3pF)
    Input impedance digital (101kΩ±1%) II (9pF±1pF)
    Vertical scale 1mV/div~20 V/div (1 MΩ)
    DC gain accuracy <5mV: ±3%, ≥5mV: ±2%
    Waveform record 100,000 frames
    Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
    CAN, LIN, FlexRay
    Bus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay
    Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations
     

     

    Auto measurements

    Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
    -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
    channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A
    Measurement display 5 types
    Measurement statistics Average, Max, Min, standard deviation and number of measurements
    Frequency counter 6 bits
    Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA
     

     

    Standard Accessories

    USB interface cable UT-D14
    Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06
    Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05
    16CH Logic analyzer probe UT-15M

     

    SKU: n/a
  • MS6900S Moisture Tester

    0 out of 5
    (0)

    Professional Mini Digital Moisture Meter.It is a multifunctional detector that it is available to measure Wood Timber’s Moisture, Humidity & Temperature. Typically, via this device, the technician can measure timber, Construction Material’s Moisture, Humidity & Temperature.
    ● Depth 0~50mm
    ● MAX / MIN
    ● Sampling Rate 240ms
    ● Unit Selection %, WB, TD, ℃, ℉, %RH
    ● Display Backlight
    ● Data Hold
    ● Auto Power Off
    ● Low Battery Display
    ● Materials Moisture Range :
    1: (8.5~60%) Beech, Spruce, Larch, Birch, Cherry, Walnut
    2: (6.8~53.4%) Oak, Cedar, Maple, Ash Tree, Pink Shower Tree, Tamarisk
    3: (0.9~24.5%) Smoothing Cement, Concrete
    4: (0.0~12.2%) Anhydrite Screed
    5: (0.7~9.2%) Cement Mortar
    6: (0.5~11.1%) Lime Mortar, Plaster
    7: (0.0~17.8%) Brick

    SKU: n/a
  • ECHANIC Advanced silicone duster A120

    0 out of 5
    (0)

    ECHANIC Advanced silicone duster A120

    SKU: n/a
  • YIHUA 850 Hot Air Heat Gun Rework Station

    0 out of 5
    (0)

    Application

    Applicable to desoldering of several types of elements: SOIC, CHIP, QFP, PLCC, BGA; the smaller the gun nozzle, the stronger of the force; suitable for desoldering of single soldering spots.

    SKU: n/a