-7%

YIHUA 605D DC Power Supply


YH-605D communication maintenance power supply

605D communication maintenance power supply is a single line output of stabilized high accuracy

DC stabilized power supply. The output voltage and current can be adjusted continuously within

the rated range. Double digital display shows output voltage and current independently. Several

protection functions include current limitation, voltage reduction, short circuit protection, over-

temperature protection, etc.

The design is applied to production line of the plant, maintenance, laboratories and is also

a necessary device for the communication industry.

22,000 23,710

Compare

Principle description of constant voltage/constant current CV/CC

 

The operation mode of constant voltage/constant current can be automatically switched depending

on the comparison result of the load current and limited current value.

  1. a) Constant voltage CV

When the existing current value is smaller than the set output limit current value, the power supply

is working under the constant voltage mode. The CV indicator light on the front panel is on, the output

voltage is controlled and it will be the same as the set value. Current changes with the load.

  1. b) Constant current mode (CC)

When the current value exceeds the limit value of the output current, the equipment will work in the

 CC mode. The CC indicator light on the front panel is on, the output current value is controlled to

the set value. Since the limited output power cannot be overloaded, the output voltage can be lower

 than the set value. When the output current is lower than the set value, the equipment will

automatically change to CC mode.

Category:
Weight 5.9 kg
Dimensions 25 × 13 × 15 cm

Product parameters

Machine parameters
rated voltage AC220V  50Hz
Power of complete machine 380W
Operating environment 0~40℃  relative humidity <80%
Storage Temperature -20~80℃  relative humidity <80%
Dimensions 255*130*150mm
weight 6.1KG
Specifications
output voltage Adjustable continuously within 0~60V
output current Adjustable continuously within 0~5A

(current limitation adjustment when above 0.2A)

output power 300W
Source effect 1mV
load effect ≤0.33%
Ripple noise ≤3mVrms(5Hz ~ 1MHz)/≤3mArms
Display accuracy 0.1V/0.1A/1mA
Protection mode Over-current, short circuit, over-temperature protection
Dissipation mode air cooling

Brand

YIHUA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “YIHUA 605D DC Power Supply”

There are no reviews yet.

  • JM-8107 38 in 1 Screwdriver Set

    0 out of 5
    (0)

    Main Features:
    ● Universal screwdriver tool kit
    ● Highly precise tips in various specifications for different uses
    ● Non-slip rubber design handle for a secure and comfortable grip, easy to operate
    ● Great for mobile phone, PDA, PC and other applications, portable case

    SKU: n/a
  • MECHANIC Industrial Triocular stereo microscope MC75T-B3

    0 out of 5
    (0)

    Binocluar magnification(7X-45X/2.1X-180X)

    Eyepiece(WF10X/20MM,WF20X/10MM)

    Objectlens(10.6X-5.5X),

    Aux(0.3X/287,0.5X/165,0.7X/120,1.5X/45,2X/30)

    Continuourszoom(0.7X-4.5X)

    SKU: n/a
  • UT681C Cable Tester

    0 out of 5
    (0)

    Main Features

    1. Tests Ethernet cables and telephone lines

    2. Equipped with RJ45 interface for Ethernet cable and RJ11 interface for telephone line testing

    3. Ethernet cables: Shielded/Unshielded test

    4. Visible LED indication

    5. Automatically check circuit breakage, short circuit and cross circuit

    6. Can toggle between fast and slow speed test modes

    7. Single key operation

    8. Manual/auto power off (after 10-minute inactivity)

    9. Low battery indication

    10. Power supplied by 9V layer-built battery

    SKU: n/a
  • YH 948DQ-II

    0 out of 5
    (0)
    SKU: n/a
  • PQM-707 Power Quality Analyzer

    0 out of 5
    (0)
    • Features:

      • 7″ touch screen – intuitive operating
      • CAT IV 600V – high safety
      • all parameters acc. to class S – high accuracy of measurements
      • Li-Ion rechargeable battery – higher mobility
      • removable memory card – recording data with no restrictions

      Possible measurements:

      • Measurements according to EN 50160,
      • Voltage L1, L2, L3, N-PE (five inputs),
        – average, minimum, maximum values, range to 760 V, ability to work with voltage transformers,
      • Current L1, L2, L3, N (four inputs),
        – average, minimum, maximum values, measurement current with range to 3 kA (depends on used clamp), ability to work with current transformers,
      • Crest factor for voltage and current,
      • Frequency from 40 Hz to 70 Hz ,
      • Active, reactive, distortion, apparent power, including the type of reactive power (capacitive, inductive),
      • Power recording:
        • Budeanu method,
        • IEEE 1459,
      • Active, reactive, apparent energy,
      • Power factor, cosφ, tgφ,
      • Up to 50th harmonics for voltage and current,
      • Total Harmonic Distortion (THD) for voltage and current,
      • Short-term (PST) and long-term (PLT) flicker,
      • Unbalance of voltage and current,
      • Current and voltage events registration including waveforms and RMS graphs half period,
      • Inrush current
      • Calculator of energy tariffs
      • ANALYZER MEASURES AND RECORDS ACCORDING TO THE IEC 61000-4-30 CLASS S STANDARD.
    SKU: n/a
  • Titan Digital Clamp Meter Multimeter Ampere Meter

    0 out of 5
    (0)

    3 1/2 digits LCD with a Max. Reading of 1999

    2) Diode and Buzzer function

    3) Low battery indication

    4) Overload protection

    5) Data hold for easy reading

    * Specification:

    1) DC voltage: 600V (?1.0%)

    2) AC voltage: 450V ( ?1.2% )

    3) OHM: 200K? (?1.0%)

    4) ACA: 20-400A (?2.0%)

    5) Power supply: (AAA) 1.5V?2

    6) Data hold: YES

    7) Dimension 150L?63W?27.5Hmm

    Weight 121g

    SKU: n/a