-13%

The Sanwa CD800a is a basic, portable, 4000 count digital multimeter


  • 4000 counts
  • 0.7% Best Accuracy
  • Sharp contrast LCD with character 17.5mm high is used
  • Solid & protective body cover that can also be used as a tilt stand
  • Frequency, capacitance, and duty cycle measurement function
  • Continuity test with buzzer

Includes meter, instruction manual and test leads.

12,600 14,500

Compare

The CD800a is designed for the measurement of home electrical appliances, small communication equipment, and low voltage circuit analysis. This device features a 4000 count high-contrast display with a character height of 17.5 mm. It has an accuracy of 0.7% and measures a max of 600 V in DC mode and 600 Volts in AC mode. Auto range feature allows users to change the measurement ranges, and can also be manually adjusted by pressing the range hold function.

This multimeter offers all necessary features required to measure basic electrical quantities such as voltageresistancecurrentcapacitancefrequencyduty cycle, and continuity test. The device also features a hold function that allows users to hold or pause a measurement.

The device has a 0.5 A/250V fuse with a blow-out capacity of 1.5kA. It has a solid and protective body cover that can also be used as a tilt stand to keep the meter upright on a stable base. The device does not have lead holders on the back, but it does have a compartment in the front to keep the testing leads protected.

  • 4000 counts
  • 0.7% Best Accuracy
  • Sharp contrast LCD with character 17.5mm high is used
  • Solid & protective body cover that can also be used as a tilt stand
  • Frequency, capacitance, and duty cycle measurement function
  • Continuity test with buzzer

Includes meter, instruction manual and test leads.

Specifications

CD800a Measuring range Best accuracy Resolution Input impedance
DCV 400m/4/40/400/600V ±(0.7%+3) 0.1mV 10M~100MΩ
ACV 4/40/400/600V ±(1.6%+5) 0.001V 10M~11MΩ
DCA 40m/400mA ±(2.2%+5) 0.01mA
ACA 40m/400mA ±(2.8%+5) 0.01mA
Resistance 400/4k/40k/400k/4M/40MΩ ±(1.2%+5) 0.1Ω
Capacitance 50n/500n/5μ/50μ/100μF ±(5%+10) 0.01nF
Frequency 5Hz~100kHz ±(0.5%+3)
Duty cycle 20%~80% ±(0.5%+5)
Continuity Buzzer sounds at between 10Ω and 120Ω Open voltage:Approx.0.4V
Diode test Open voltage:approx.1.5V
Display numeral display 4000
Sampling rate 3 times/sec.
Bandwidth 40Hz~400Hz
Fuse 0.5A/250V 1.5kA Φ5×20 Ceramic
Battery R6P(1.5V)x2
Battery life Approx.500h (manganese battery) at DCV range
Size/Mass H176×W104×D46mm/Approx.340g
Test lead length/Pin tip Length: approx. 0.7m/19mm

Brand

SANWA

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “The Sanwa CD800a is a basic, portable, 4000 count digital multimeter”

There are no reviews yet.

  • UT243 Power and Harmonics Clamp Meters

    0 out of 5
    (0)

    UT240 series is a stable, safe and reliable handheld power and harmonics clamp meter, which combines with digital ammeter, power measurement, harmonic measurement and equipped with a powerful measurement and data processing software. It is suitable for testing, calculating and displaying voltage, current, active power, power factor, phase angle, apparent power, reactive power, harmonic, electrical energy and frequency etc. Its harmonic measurement can be measured up to 20 times.

    SKU: n/a
  • UT305S Professional Infrared Thermometer

    0 out of 5
    (0)

    Features of UT305S Professional Infrared Thermometer

    Certificates: CE, UKCA

    ● °C/°F selection
    ● Laser switch
    ● Data hold/LCD backlight
    ● Auto power off

    ● Tripod mounting hole
    ● Low battery indication
    ● MAX/MIN/AVG/DIFF mode
    ● High/low alarm

    SKU: n/a
  • RF-G30

    0 out of 5
    (0)
    SKU: n/a
  • AC/DC DIGITAL CLAMP METER KT 203

    0 out of 5
    (0)

    AC/DC DIGITAL CLAMP METER KT 203

    • Small and handy clamp meter
    • IEC 6101C Clamp meter
    • DMM function A0-1 Safety Standard CAT Ⅲ 300V, CAT Ⅱ 600V

    • 400A AC/DCV, DCV, Ω, Continuity Buzzer.

    SKU: n/a
  • UT682D Wire Tracker

    0 out of 5
    (0)
    SKU: n/a