JAKEMY JM-Y02 18 in 1 Precision Electric Screwdriver Set DIY tool repair kit with aluminium alloy handle
Dedicated to Precision electronic product maintenance.
10 in stock
Application:
Cell phone/Tablet/Camera/Laptop/Glasses
₨8,633 ₨11,990
10 in stock
CompareJAKEMY JM-Y02 18 in 1 Precision Electric Screwdriver Set DIY tool repair kit with aluminium alloy handle
Dedicated to Precision electronic product maintenance.
Weight | 0.5 kg |
---|---|
Dimensions | 10 × 5 × 4 cm |
800mAH Battery capacity
Matching with micro USB wiring and plugs
Input voltage supports 220V AC/5v USB voltage
FCC CE and other certificates are completed
Guaranteed Safety and portability
No-load speed can up to 395r/min
Take the demolition of the iphone bottom five-star 0.8 screws as an example*
You can remove a screw in an average of 2 seconds
Greatly improve the efficiency of electric screwdriver use
(*Derived from experimental data)
UT510 series is a kind of intelligent insulation tester. The device circuit design takes microcomputer technology design as the core and combines the large scale integrated circuit with digit circuit. It is equipped with strong measuring software and data processing software. It is applied to the parameter measurement of insulation resistance, voltage and low resistance. It has stable performance and simple operation. It is applicable to on-site measurement and repair of the electrical equipment and charging line. It is the ideal tool of maintaining electrical equipment. It is also used for smelting, communication, manufacture, fossil oil, national defense, electricity, chemical industry and circuit.
Specifications | UT622A | UT622C | UT622E |
Certificates | CE, RoHS | ||
Test frequency | 100Hz, 120Hz, 1kHz, 10kHz | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz | 100Hz, 120Hz, 1kHz, 10kHz, 100kHz |
Test signal level | 0.1Vrms, 0.3Vrms, 1Vrms | ||
Output impedance | 100Ω | ||
Measurement parameters | Primary: L/C/R/Z Secondary: D/Q/θ/ESR |
Primary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR | |
Auto LCR | √ | ||
Test terminals | Three-terminal test jacks, five-terminal test sockets | ||
Test rate | Fast (20 times/s), medium (5 times/s), or slow (2 times/s) | ||
DCR test rate | — | — | Fast (20 times/s), medium (5 times/s), or slow (2 times/s) |
Ranging mode | Auto/hold | ||
Tolerance range | 1%~20% | ||
Testing circuit mode | Series/parallel mode | ||
Clearing correction | Open/short circuit | ||
Fuse of test ports | 0.1A/250V | ||
Communication interface | Mini-USB | ||
LED alarm for tolerance (pass: green; fail: red) |
√ | √ | √ |
Display range | |||
Maximum reading | 99999 | ||
Minimum resolution | 0.0001 | ||
Maximum accuracy | 0.001 | ||
L | 0.00μH~99.999H | ||
C | 0.00pF~99.999mF | ||
Z/R | 0.0000Ω~9.9999MΩ | ||
ESR | 0.0000Ω~999.99Ω | ||
D | 0.0000~9.9999 | ||
Q | 0.0000~99999 | ||
θ | -179.9°~179.9° | ||
DCR | — | — | 0.01mΩ–20.000MΩ |
Temperature coefficient | 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) | ||
General Characteristics | |||
Power | 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A | ||
Display | 2.8′ TFT LCD 320X240 | ||
Product net weight | 420g | ||
Product size | 93mm x 192mm x 44mm | ||
Standard accessories | Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual |
There are no reviews yet.