JAKEMY JM-Y02 18 in 1 Precision Electric Screwdriver Set DIY tool repair kit with aluminium alloy handle
Dedicated to Precision electronic product maintenance.
10 in stock
Application:
Cell phone/Tablet/Camera/Laptop/Glasses
₨8,633 ₨11,990
10 in stock
CompareJAKEMY JM-Y02 18 in 1 Precision Electric Screwdriver Set DIY tool repair kit with aluminium alloy handle
Dedicated to Precision electronic product maintenance.
Weight | 0.5 kg |
---|---|
Dimensions | 10 × 5 × 4 cm |
800mAH Battery capacity
Matching with micro USB wiring and plugs
Input voltage supports 220V AC/5v USB voltage
FCC CE and other certificates are completed
Guaranteed Safety and portability
No-load speed can up to 395r/min
Take the demolition of the iphone bottom five-star 0.8 screws as an example*
You can remove a screw in an average of 2 seconds
Greatly improve the efficiency of electric screwdriver use
(*Derived from experimental data)
UT387S wall scanners are used to detect a variety of objects behind the wall, designed with multiple measurement modes and additional function to conveniently measure the laser distance and wood moisture detection. They are widely used in home renovation, home improvement and DIY projects.
Model | UT3513 |
Resistance range | 20m Q/200m Q/2Q/20Q /200 Q/2kQ/20kQ |
Resolution | 1 u Q/10 u Q/100 u Q/lmO/lOmQ/lOOmQ/1 Q/10Q/100Q |
Test current | 1A/1A/100mA/10mA/1mA/1mA/100 uA/10 u A/l uA |
Testing terminal opencircuit voltage | <1V/<1V/<1V/<1V/<5V/<5V/<5V/<5V/<3V/ |
Measured parameter | DC resistance |
Basic accuracy | Slow: 0. 1%; Medium: 0. 2% |
Maximum reading | 22000 |
Range mode | Auto/Manual/nominal |
Calibration | Short-circuit full range zeroing |
Sorting function | 3types of resistance and voltage input: exceeds upper limit/exceeds lower limit/within the range,2 types of sorting result output: PASS/FAIL |
Comparing method | Absolute tolerance, percentage tolerance, direct-reading comparison |
Trigger mode | Internal, external |
Test terminal | Four-terminal measurement |
Button functions | Lock 一一 keyboard lock, OK 一一 screenshot |
System setup | Language: Chinese/English, key tone setting |
Interfaces & protocols | Handler interface, RS232, USB DEVICE and USB HOST communication interface,SCPI and Modbus protocol |
Upper computer software | V |
Power | AC 100~240V 50/60Hz |
Display | 4.3-inches LCD |
Technical data
Basic function |
Range |
Accuracy |
DCV |
400mV/4V/40V/400V/1000V |
±(0.5%+5) |
ACV |
400mV/4V/40V/400V/750V |
±(1.0%+5) |
DCA |
400A/1000A |
±(2.0%+5) |
ACA |
400A/1000A |
±(2.0%+5) |
Resistance |
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ |
±(0.8%+3) |
Capacitance |
4nF/40nF/400nF/4uF/40uF/200uF |
±(3.5%+8) |
Frequency |
100Hz/1kHz/10kHz/100kHz/1MHz/10MHz |
±(0.5%+4) |
Temperature |
(-40~ 1000) ℃ / (-40 ~1832) ℉ |
±(1.0%+5) |
Special function |
CM-2056 |
NCV test |
√ |
True RMS test |
√ |
Diode test |
√ |
Continuity test |
Less than 50Ω±10Ω |
Low battery indicator |
Approx. less than 2.4 V |
Data hold |
√ |
Auto power off |
About 15 minutes |
Function protection |
√ |
Clamp light |
√ |
Backlight display |
√ |
Input impedance |
10MΩ |
Sampling rate |
3 times/s |
AC frequency response |
Current 50-60Hz/ voltage 50-400Hz |
Operation method |
Auto or manual range |
Max display |
4000 |
Clamp opens |
52mm |
Battery |
3V (2*AAA battery) |
General Characteristic
Meter color |
Orange and Black |
Meter weight |
About 280g (including battery) |
Meter size |
270×123×50mm |
Standard accessory |
Test leads, battery, manual, TP01 temperature probe |
There are no reviews yet.