MS8910 Smart SMD Tester (R/C)
Out of stock
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
● Display 3000 counts
● Auto Ranging
● Auto Power Off
● Data Hold
● Low Battery Display
● Auto Scanning
● Diode Check Open Voltage 2.8V
● Diode Testing Current 2mA
● Continuity Buzzer <30Ω
₨4,211 ₨5,265
Out of stock
CompareThe Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
● Display 3000 counts
● Auto Ranging
● Auto Power Off
● Data Hold
● Low Battery Display
● Auto Scanning
● Diode Check Open Voltage 2.8V
● Diode Testing Current 2mA
● Continuity Buzzer <30Ω
| Weight | 0.1 kg |
|---|---|
| Dimensions | 17 × 3 × 2 cm |
| Specifications | Range | Resolution | Accuracy | |
| Resistance |
300Ω/3kΩ/30kΩ/300kΩ/3MΩ
|
0.1Ω/1Ω/10Ω/100Ω/1kΩ | ±(1.0%+2) | |
| 30MΩ | 10kΩ | ±(1.2%+3) | ||
| Capacitance | 3nF/30nF/300nF/3μF/30μF |
1pF/10pF/100pF/1nF/10nF
|
±(2.0%+3) | |
| 300μF/3mF/30mF | 0.1μF/1μF/10μF | ±(3.0%+3) |
● Power Supply : 1×3V CR2032 Battery
● Product Size : 175mm×32mm×20mm/6.89″×1.26″×0.79″
● Product Weight : 48g/0.10lb
● Certificate : CE / ETL /RoHS
Brand
MASTECH
Based on 0 reviews
Be the first to review “MS8910 Smart SMD Tester (R/C)”
-
Leeb Hardness Tester
UT347A Leeb Hardness Tester
Features of UT347A Leeb Hardness Tester
Certificates: CE (In processing), UKCA
● 6 kinds of hardness values (HL, HB, HRC, HRB, HV, HS) is a real-time measurement
● One hardness tester can be equipped with 7 different impact devices● Automatic identification without calibration when replacing impact device
● Statistical, multi-unit, line chart, histogram 4 measurement modes
● Camera: 640×480 pixels (900 BMP format pictures could be stored)● Automatic alarm when the upper and lower limits are exceeded● Adjustable backlight brightness● Mobile phone Bluetooth APP and PC software analysis data● Support thermal printing● Tri-color LED indication and LED flashlightSKU: n/a -
Function Generators
UTG9005C-II Function/Arbitrary Waveform Generato
1. Output waveforms: Sine, square, ramp, pulse, noise, DC, arbitrary
2. Output frequency range: Sine/square, 5MHz3. High-accuracy, broad-band 6 bit frequency counter, range: 100mHz~100MHz4. 4W power output5. EBTN LCD screenSKU: n/a -
Digital Multi Meter
UNI T Benchtop Digital Multimeter UT8802E
- 20,000 Count EBTN LCD Display
- DC Voltage: 200mV/2V/20V/200V/1000V
- AC Voltage: 2V/20V/200V/750V
- DC Current: 200μA/2mA/20mA/200mA/20A
- AC Current: 2mA/20mA/200mA/20A
- Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
- Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
- Frequency: 200Hz~10MHz
- Duty cycle: 5%~99%
- Frequency response: 1 kHz
- USB Interface
- Data hold
- MAX/MIN
- Continuity buzzer
- Diode/transistor
- test
- CAT II 600V
SKU: n/a
Related products
-
LCR Meter
UT622A Digital Inductance LCR Meter
Specifications UT622A UT622C UT622E Certificates CE, RoHS Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz Test signal level 0.1Vrms, 0.3Vrms, 1Vrms Output impedance 100Ω Measurement parameters Primary: L/C/R/Z
Secondary: D/Q/θ/ESRPrimary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR Auto LCR √ Test terminals Three-terminal test jacks, five-terminal test sockets Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s) DCR test rate — — Fast (20 times/s), medium (5 times/s), or slow (2 times/s) Ranging mode Auto/hold Tolerance range 1%~20% Testing circuit mode Series/parallel mode Clearing correction Open/short circuit Fuse of test ports 0.1A/250V Communication interface Mini-USB LED alarm for tolerance
(pass: green; fail: red)√ √ √ Display range Maximum reading 99999 Minimum resolution 0.0001 Maximum accuracy 0.001 L 0.00μH~99.999H C 0.00pF~99.999mF Z/R 0.0000Ω~9.9999MΩ ESR 0.0000Ω~999.99Ω D 0.0000~9.9999 Q 0.0000~99999 θ -179.9°~179.9° DCR — — 0.01mΩ–20.000MΩ Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) General Characteristics Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A Display 2.8′ TFT LCD 320X240 Product net weight 420g Product size 93mm x 192mm x 44mm Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual SKU: n/a -
LCR Meter
UNI-T UT622E Handheld LCR Meter
Features of UNI-T UT622E Handheld LCR Meter:
- Up to 0.1% measurement accuracy
- High-brightness white backlight
- Ultra-low power consumption and long battery life (8 hours)
- Maximum test speed: 20 times/s
- Constant 100Q output impedance
- Data hold and recording mode
- Standard Mini-USB interface, SCPI command set
SKU: n/a -
LCR Meter
UT612 LCR Meters
UT610 series is a handheld LCR digitalelectric bridge meter with stable performance, safety, reliability and autorange. It is professional to measure inductance, capacitance and resistance. Ithas the features of low power dissipation, high accuracy and fast speed. It canselect the series-parallel measurement mode; measure the quality factor ofcomponents, the loss, the phase angle, equivalent resistance and DC resistance.It can provide up to 5 kinds of frequency under the inductance, capacitance andresistance mode to satisfy the actual requirement.
It is applicable to measuring and filtratingthe inductance, capacitance and resistance of lab, production line, maintenancepoint and teaching. It is the ideal tool of maintaining for many users.
SKU: n/a
There are no reviews yet.