MS8910 Smart SMD Tester (R/C)
Out of stock
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
● Display 3000 counts
● Auto Ranging
● Auto Power Off
● Data Hold
● Low Battery Display
● Auto Scanning
● Diode Check Open Voltage 2.8V
● Diode Testing Current 2mA
● Continuity Buzzer <30Ω
₨4,211 ₨5,265
Out of stock
CompareThe Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
● Display 3000 counts
● Auto Ranging
● Auto Power Off
● Data Hold
● Low Battery Display
● Auto Scanning
● Diode Check Open Voltage 2.8V
● Diode Testing Current 2mA
● Continuity Buzzer <30Ω
| Weight | 0.1 kg |
|---|---|
| Dimensions | 17 × 3 × 2 cm |
| Specifications | Range | Resolution | Accuracy | |
| Resistance |
300Ω/3kΩ/30kΩ/300kΩ/3MΩ
|
0.1Ω/1Ω/10Ω/100Ω/1kΩ | ±(1.0%+2) | |
| 30MΩ | 10kΩ | ±(1.2%+3) | ||
| Capacitance | 3nF/30nF/300nF/3μF/30μF |
1pF/10pF/100pF/1nF/10nF
|
±(2.0%+3) | |
| 300μF/3mF/30mF | 0.1μF/1μF/10μF | ±(3.0%+3) |
● Power Supply : 1×3V CR2032 Battery
● Product Size : 175mm×32mm×20mm/6.89″×1.26″×0.79″
● Product Weight : 48g/0.10lb
● Certificate : CE / ETL /RoHS
Brand
MASTECH
Based on 0 reviews
Be the first to review “MS8910 Smart SMD Tester (R/C)”
-
Laser Distance Meters
LM120C Laser Distance Meters (Discontinued)
Features of LM80C/LM120C/LM200C Laser Distance Meters
● 2.4-inch color screen
● 12 measurement modes● Electronic leveling● 3 selectable measurement references● USB 3.0 supply power● 100 groups of data storage● Rotatable screen● Camera-aided measurement● 2m drop test● IP65 dust and water proofSKU: n/a -
Multimeters
Fluke 18B+ Digital Multimeter
Feature:
-New Function:Frequency Test
-New Desgin: A Large LCD than FLUKE 18B, with a high brightness LCD Back light
-Two Mode LED Test :
-DMM LED Socket Test Mode .
-UUT(PCBA) LED Test Mode(using test lead).
-Light up LED without considering the polarity.
-Voltage,Resistance,Continuity Testing,Capacitance Test.
-Data Hold,Diode Test.
-Frequency and Duty Cycle.
-MAX Input Current 10A.
SKU: n/a -
Clamp Meters
UT222 2500A ACA DCA Digital Clamp Meters
UT222 are stable and safe 3 5/6 digit AC&DC digital clamp meters.It is perfectly designed with over-load protection for all ranges and the unique structure, making it a superb professional meter especially for electricians.
An ideal tool for the maintenance and troubleshooting needed in metallurgy, manufacturing, petroleum, electric power, chemical industry, etc;SKU: n/a
Related products
-
LCR Meter
UT620 Series Digital Micro Ohm Meters
UT620 series are used to measure DC low resistance through 4-wire method. Some of its features are: Comparison function to determine if the device is in good condition, unknown wire length calculation (FT/M); two-way data transmission by USB interface; built-in rechargeable lithium battery. UT620 can be used in narrow space for on-site troubleshooting, such as metal coating resistance/motor and small transformer winding resistance measurement, earth system joints/welding points/power distribution cabinet bus and lead connection inspection and more.
SKU: UN62B0TUOM -
LCR Meter
UT622A Digital Inductance LCR Meter
Specifications UT622A UT622C UT622E Certificates CE, RoHS Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz Test signal level 0.1Vrms, 0.3Vrms, 1Vrms Output impedance 100Ω Measurement parameters Primary: L/C/R/Z
Secondary: D/Q/θ/ESRPrimary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR Auto LCR √ Test terminals Three-terminal test jacks, five-terminal test sockets Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s) DCR test rate — — Fast (20 times/s), medium (5 times/s), or slow (2 times/s) Ranging mode Auto/hold Tolerance range 1%~20% Testing circuit mode Series/parallel mode Clearing correction Open/short circuit Fuse of test ports 0.1A/250V Communication interface Mini-USB LED alarm for tolerance
(pass: green; fail: red)√ √ √ Display range Maximum reading 99999 Minimum resolution 0.0001 Maximum accuracy 0.001 L 0.00μH~99.999H C 0.00pF~99.999mF Z/R 0.0000Ω~9.9999MΩ ESR 0.0000Ω~999.99Ω D 0.0000~9.9999 Q 0.0000~99999 θ -179.9°~179.9° DCR — — 0.01mΩ–20.000MΩ Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) General Characteristics Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A Display 2.8′ TFT LCD 320X240 Product net weight 420g Product size 93mm x 192mm x 44mm Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual SKU: n/a -
LCR Meter
UT612 LCR Meters
UT610 series is a handheld LCR digitalelectric bridge meter with stable performance, safety, reliability and autorange. It is professional to measure inductance, capacitance and resistance. Ithas the features of low power dissipation, high accuracy and fast speed. It canselect the series-parallel measurement mode; measure the quality factor ofcomponents, the loss, the phase angle, equivalent resistance and DC resistance.It can provide up to 5 kinds of frequency under the inductance, capacitance andresistance mode to satisfy the actual requirement.
It is applicable to measuring and filtratingthe inductance, capacitance and resistance of lab, production line, maintenancepoint and teaching. It is the ideal tool of maintaining for many users.
SKU: n/a
There are no reviews yet.