Product Features
1. Analogue bar graph
2. Diode test and buzzer continuity
3. Transistor measurement
4. Auto range
5. MAX/MIN/REL measurement mode
10 in stock
Product Features
1. Analogue bar graph
2. Diode test and buzzer continuity
3. Transistor measurement
4. Auto range
5. MAX/MIN/REL measurement mode
₨5,922 ₨6,581
10 in stock
CompareProduct Features
1. Analogue bar graph
2. Diode test and buzzer continuity
3. Transistor measurement
4. Auto range
5. MAX/MIN/REL measurement mode
Weight | 0.4 kg |
---|---|
Dimensions | 18 × 8 × 4 cm |
Specifications | Range | Best Accuracy |
Model | UT60C | |
DC Voltage (V) | 400mV/4V/40V/400V/1000V | ±(0.8%+1) |
AC Voltage (V) | 4V/40V/400V/750V | ±(1%+5) |
Communication Bandwidth | 40Hz~400Hz | √ |
DC Current (A) | 400mA/4000mA/40mA/400mA/4A/10A | ±(1%+2) |
AC Current (A) | 400mA/4000mA/40mA/400mA/4A/10A | ±(1.5%+5) |
Resistance (Ω) | 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ | ±(1%+2) |
Capacitance (F) | 40nF/400nF/4μF/40μF/100μF | ±(3%+5) |
Frequency (Hz) | 10Hz~10MHz | ±(0.1%+3) |
Duty Cycle | 0.1%~99.9% | √ |
Temperature (°C) | -40℃~1000℃ | ±(1%+3) |
Features | ||
Fused 10A Range | Ceramic fuse | √ |
Relative Mode | √ | |
Full Icon Display | √ | |
Diode | √ | |
Continuity Buzzer | √ | |
Low Battery Display | √ | |
Input Impedance for DC Voltage Measurement | 10MΩ | √ |
Data Hold | √ | |
Auto Ranging | √ | |
Auto/Manual Range | √ | |
Display Backlight | √ | |
Max Display | 3999 | √ |
Auto Power Off | √ | |
General Characteristic | ||
Power | 9V Battery (6F22) | |
LCD Size | 63mm×31mm | |
Product Colour | Red and Grey | |
Product Net Weight | 340g | |
Product Size | 177mm×85mm×40mm | |
Standard Accessories | Test Lead, Battery, Test Clip, RS232C Interface Cable,PC Software CD | |
Standard Individual Packing | Gift Box,English Manual | |
Standard Quantity Per Carton | 40 pcs | |
Standard Carton Measurement | 595mm x 400mm x 326mm (0.078 CBM Per Standard Carton) | |
Standard Carton Gross Weight | 21Kg | |
Optional Accessories* | Clip-On Test Lead Light (UT-TL), Built-In Test Lead Light (UT-L1), Built-In Test Lead Light Plus (UT-L2) |
The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
● Display 3000 counts
● Auto Ranging
● Auto Power Off
● Data Hold
● Low Battery Display
● Auto Scanning
● Diode Check Open Voltage 2.8V
● Diode Testing Current 2mA
● Continuity Buzzer <30Ω
1. Ergonomic exterior, comfortable handling
UT270 series is widely used in earth ground and circuit resistance measurements of electric power, telecommunications, meteorology, oil field, construction and industrial electrical equipment. It can measure the ground system of the circuit without disconnecting grounding wires, auxiliary electrode. UT278A can also measure leakage current and neutralline current of earth ground system
.
There are no reviews yet.