Product Features 1. 6000 Counts 2. True RMS voltage and current measurements 3. Capacitance, Resistance, Buzzer, Diode 4. Capacitance with REL function, resolution is 1pF, maximum measurement range is 6000μF 5. Highly accurate frequency measurement function; minimum resolution is 0.001Hz 6. MAX\MIN and MAX-MIN value 7. DC current minimum resolution is 0.01 A, AC current minimum resolution is 1μA, maximum range is 20A 8. HOLD function,backlight and auto power off function
Multimeters
UT890D Digital Multimeter
Availability:
20 in stock
Product Features 1. 6000 Counts 2. True RMS voltage and current measurements 3. Capacitance, Resistance, Buzzer, Diode 4. Capacitance with REL function, resolution is 1pF, maximum measurement range is 6000μF 5. Highly accurate frequency measurement function; minimum resolution is 0.001Hz 6. MAX\MIN and MAX-MIN value 7. DC current minimum resolution is 0.01 A, AC current minimum resolution is 1μA, maximum range is 20A 8. HOLD function,backlight and auto power off function
₨4,560 ₨5,491
20 in stock
CompareWeight | 0.35 kg |
---|---|
Dimensions | 18 × 9 × 6 cm |
Specifications | Range | Accuracy |
DC current(V) | 600.0mV | ±(0.5%+4) |
6.000V/60.00V/600.0V | ±(0.5%+2) | |
1000V | ±(0.7%+10) | |
AC current(V) | 6.000V/60.00V/600.0V | ±(0.8%+3) |
750V | ±(1.0%+10) | |
AC Current(A) | 6.000mA/60.00mA | ±(1.0%+12) |
600.0mA | ±(2.0%+3) | |
20.00A | ±(3.0%+5) | |
DC Current(A) | 60.00μA/6.000mA/60.00mA | ±(0.8%+8) |
600.0mA | ±(1.2%+5) | |
20.00A | ±(2.0%+5) | |
Resistance(Ω) | 600.0Ω | ±(0.8%+5) |
6.000kΩ/60.00kΩ/600.0kΩ/6.000MΩ | ±(0.8%+3) | |
60.00MΩ | ±(1.0%+25) | |
Capacitance(F) | 9.999nF | ±(5.0%+35) |
99.99nF~999.9μF | ±(2.5%+20) | |
9.999mF | ±(5.0%+10) | |
99.99mF | 10mF≤C≤20mF | |
±(10.0%+5) | ||
Frequency(Hz) | 9.999Hz~9.999MHz | ±(0.1%+5) |
Measurement range: 10Hz~10MHz(Auto Range), ≤100kHz∶100mVrms≤Input amplitude≤30Vrms,>100kHz~1MHz∶200mVrms≤Input amplitude≤30Vrms,>1MHz∶600mVrms≤Input amplitude≤30Vrms | ||
MAX/MIN | √ | |
True RMS | √ | |
Frequency Response | Applies to sine wave and triangular wave, ≥200Hz, other waveforms are for reference | 40Hz~1kHz |
Diode Test | √ | |
hFE | √ | |
Continuity Test | √ | |
REL | √ | |
Data Hold | √ | |
Backlight Adjustment | √ | |
Battery Voltage Indicator | √ | |
Auto Power Off | Around 15 Minutes | √ |
Input Impedance For DCV | ≥10MΩ | √ |
General Characteristics | ||
Use Environment | 18℃~28℃(64℉~82℉) Relative Temperature | |
Battery | 9V Battery(6F22) | |
LCD size | 63mm × 29mm | |
Product Color | Red and Grey | |
Product Net Weight | 300g | |
Product Size | 186mm × 91mm × 39mm | |
Standard Accessories | Test Leads, Battery | |
Standard Individual Packing | Gift Box, Instructions, Warranty Card | |
Standard Quantity Per Carton | 40PC | |
Standard Individual Packing Size | 645mm × 450mm × 340mm | |
Standard Carton Gross Weight | 22.8 Kg |
Based on 0 reviews
Be the first to review “UT890D Digital Multimeter”
-
Thermal Imagers
UNI-T UTi260B Handheld Thermal Imaging Camera Real Time Thermal Imager with Buzzer Flashlight Alarm 2.8′′ LCD Display
Thermal ImagersUNI-T UTi260B Handheld Thermal Imaging Camera Real Time Thermal Imager with Buzzer Flashlight Alarm 2.8′′ LCD Display
Features of UTi260B Thermal Imaging Camera - 2.8″ TFT screen
- Infrared resolution: 256 x 192
- Temperature measurement range: -15ºC~550ºC
- Photograph function with SD card storage
- PC analysis software
- Buzzer/flashlight alarm
- Real-time image transmission
- Auto capture of High/Low temperature
- Flashlight
- 1/4″ tripod mounting hole
- IP65/2m drop proof
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Multimeters, Phase Detector Meters
UT261B Phase Sequence and Motor Rotation Indicator
UT261 series is used for determining 3-phase power phase sequence, missing phase indication, and motor phase rotation (UT261B). UT261A and UT261B can measure AC voltage of 40~700V and 90~600V respectively. These devices can operate in frequency range of 15~400Hz. UT261 are durable devices which can withstand impact from 2 meter’ s height. Test leads with protective tubing are included in optional accessories.
SKU: n/a -
Soldering Station
YH 852D+ REWORK STATION
Features:
- Hot air and hot iron 2in1 rework soldering station
- Dual LED digital displays to show precision temperature
- SAMSUNG microcomputer control, quick warming-up
- Adjust the airflow and temperature control rotation easily
- Intelligence cool airflow features long service life of the machine and safe personal operation
- Automatically stop rotation
- ESD design of soldering iron to protect sensitive components
- High-quality resistance for durable use
- Stainless steel holder for placing the hot air gun
- Plastic stand for keeping the iron from flammable materials
- Voltage: 200V to 240V 50/60Hz AC
SKU: n/a -
Rework & Soldering Station
YIHUA 937D Repairing Soldering Iron
Standard Configuration
Main unit 1set
Soldering iron handle (include iron tips and heater) 1pc
Iron holder 1pc
High temperature resistant sponge 1pc
Manual 1pc
Power plug :1pc
Application Scope
Production lines for electronic products ,.
2. Repair industry for moblie phone.
3. SMD components requiring the highest precision.
SKU: n/a
There are no reviews yet.