-10%

ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope


27,000 30,000

Compare

ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope

  • The automatic waveform mode, normal mode and single mode can be used for the waveform needs of different users.
  • The high-resolution screen provides clear and intuitive display and bright backlight.
  • 2 in 1 function, multimeter + oscilloscope, easy to use and quick measurement, convenient to use.
  • The oscilloscope probe is not needed and the waveform can be measured quickly and accurately.
  • The data waveform holding function in measurement can include 100 records and 50 waveforms.
Category:

Element Type: Oscilloscope Multimeter
Material: ABS

General <75% RHProduct size: approx. 160 x 82 x 30 mm/6.3 x 3.2 x 1.2 in analogue bandwidth 40 MHz Hz vertical resolution 8 bit input resistor approx. 10mQ Vertical Sensitivity Range 500mV/Div-200V/DivVertical Amplitude Accuracy ± (5% + 0.2div) Automatic 0 Reference During DC MeasurementTrigger Level ± 6div) (0.1div Position Setting ± 12div (0.1div per step) Cursor Measurement Function DT, 1/DT (Frequency) Automatic measuring accuracy ± (5% + 0.2div) Observation range 60 x 40 mm input resistance 10 MΩ automatic shut-off 15 minutes or deactivates operating altitude 0 – 2000 m memory capacity 100 DMM data, 50 OSC waveform recordings Storage condition-10 °C -60 °C. <90%. RHWeight: approx. 411g/14.5ozMaximum real-time sample rate 200MSPSNonlinearity ± 1bitIndexingVertical ± 6.0, horizontal 24.0Time Base Range12.5ns/div-10s/divTime Base Accuracy ± (0.01% + 0.1div) Scan ModeAuto/Normal/SingleTrigger Slope Selection. tionRising/Falling EdgeAuto ConfigurationAutomatic timebase and vertical amplitudeAutomatic measuring functionVp-p, Vavg, VrmsRecord Length24.0divAnalogue bandwidth up to 40 MHz refers to the bandwidth when the voltage is damped to 3 dB. If the input signal is disturbed, use a conversion plug and a special shielded high frequency wire. The vertical damping is 1-2-5 range switching

Brand

China Brand

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “ET827 Handheld Tester with High Resolution Screen and Digital Multimeter Oscilloscope”

There are no reviews yet.

  • YH Q208C PIPE FOR YH 8508D,

    0 out of 5
    (0)
    SKU: n/a
  • CLAMP METER AC DC CM 2056

    0 out of 5
    (0)

    Technical data

    Basic function

    Range

    Accuracy

    DCV

    400mV/4V/40V/400V/1000V

    ±(0.5%+5)

    ACV

    400mV/4V/40V/400V/750V

    ±(1.0%+5)

    DCA

    400A/1000A

    ±(2.0%+5)

    ACA

    400A/1000A

    ±(2.0%+5)

    Resistance

    400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ

    ±(0.8%+3)

    Capacitance

    4nF/40nF/400nF/4uF/40uF/200uF

    ±(3.5%+8)

    Frequency

    100Hz/1kHz/10kHz/100kHz/1MHz/10MHz

    ±(0.5%+4)

    Temperature

    (-40~ 1000) ℃ / (-40 ~1832) ℉

    ±(1.0%+5)

    Special function

    CM-2056

    NCV test

    True RMS test

    Diode test

    Continuity test

    Less than 50Ω±10Ω

    Low battery indicator

    Approx. less than 2.4 V

    Data hold

    Auto power off

    About 15 minutes

    Function protection

    Clamp light

    Backlight display

    Input impedance

    10MΩ

    Sampling rate

    3 times/s

    AC frequency response

    Current 50-60Hz/ voltage 50-400Hz

    Operation method

    Auto or manual range

    Max display

    4000

    Clamp opens

    52mm

    Battery

    3V (2*AAA battery)

    General Characteristic

    Meter color

    Orange and Black

    Meter weight

    About 280g (including battery)

    Meter size

    270×123×50mm

    Standard accessory

    Test leads, battery, manual, TP01 temperature probe

    SKU: n/a
  • ,

    JM-8150 52 In 1 Model And Electronics Screwdriver

    0 out of 5
    (0)

    Accessories:

    1PCS 130mm Various angle veer

    1PCS 120mm handle

    1PCS parts box

    1PCS 100mm extension bar

    SKU: n/a
  • UT107 Handheld Automotive Multi-Purpose Meters

    0 out of 5
    (0)

    Main Features

    1. Dwell angle measurement (DWELL)

    2. Tach measurement (RPM)

    3. Data hold

    4.12V battery test, duty ratio measurement

    5. Measurement input port prompt

    6. Low battery, auto polarity and over-range indication

    7. Complies with CE (European Union) directives

    SKU: n/a