UNI-T UPO1102CS oscilloscope

115,000 120,000


The UNI-T UPO1102CS is a multi-function, digital phosphorus oscilloscope with 2 channels, a bandwidth of 100 MHz and a maximum sample rate of 1 GSa/s. This phosphor oscilloscope can present three-dimensional waveform data of amplitude, time and signal intensity. This oscilloscope is fast with a waveform capture rate of 500.000 wfm/s and with a maximum memory depth of 56 Mpts. The oscilloscope comes with serial decoding capabilities, which is a good feature for a oscilloscope of this price range, as these are often only offered with more expensive oscilloscopes.

With the multi-scope of the UPO1102CS, signals with different clock sources can be individually set up and this is convenient to analyse the waveform parameters. The UNI-T UPO1102CS has a 1 Mpts FFT that works as a spectrum analyser with functions such as frequency range, detection mode and spectrum marking. The oscilloscope has a built-in webserver, with which the oscilloscope can be connected and remotely controlled via the web page of UNI-T.


Channels 2
Memory depth 56 Mpts (per channel)
Sample rate 1 GSa/s (per channel)
Waveform capture rate 500.000 wfm/s
Vertical resolution 8 bits
Vertical scale 1 mV/div – 20 V/div
Interfaces USB Host, USB Device, LAN, Pass/Fail, Trigger Out
Decoding options RS232, I2C, SPI, CAN, LIN
Display 7″ TFT LCD (800×480)
Dimensions 306 x 138 x 107 mm
Weight 3.0 kg



Based on 0 reviews

0.0 overall

Be the first to review “UNI-T UPO1102CS oscilloscope”

There are no reviews yet.

  • UT315A Vibration Tester

    0 out of 5

    UT310 series handheld vibration testers can measure displacement, velocity, and acceleration of rotating and reciprocating machinery. Technicians can use these to monitor equipment status and ensure normal operation.

    SKU: n/a
  • MRU-30 Earth Resistance and Resistivity Meter

    0 out of 5


    • It allows to take the measurements of:

      • earthing resistance using auxiliary electrodes,
      • earthing resistance using auxiliary electrodes and clamp (for measurements of multiple earthing),
      • earthing resistance using double clamps for measuring multiple earthing without underground connections.
      • ground resistivity (Wenner method),
      • continuity of equipotential bondings and protective
      • conductors (meeting the requirements IEC 60364) with auto-zero function – with current 200mA.


      • measurement of resistance of auxiliary electrodes RS and RH,
      • measurement of interference voltage,
      • measurement in the presence of interference voltage in the power network
      • with frequency 50Hz, 60Hz,
      • selection of maximum measuring voltage (25V and 50V),
      • introducing the distance between the electrodes for the resistivity in metres (m) and feet (ft),
      • memory of 990 measurements (10 banks of 99 cells each),
      • calibration of clamp used,
      • data transmission to the computer (USB),
      • indication of battery state.
    SKU: n/a
  • UT213C ACA DCA Digital Clamp Meters

    0 out of 5

    Main Features

    1. 10A/400A AC/DC measurement with Hall-effect sensor

    2. Auto range makes measurement faster and more effective

    3. 4000 display count, 3/s sampling rate

    4. True RMS measurement

    5. NCV, Non-Contact AC Voltage testing

    6. Frequency and duty ratio measurement

    7. MAX/MIN mode

    8. Relative mode

    9. Flashlight function for measuring at night or in the dark

    10. K-type point contact temperature probe for temperature measurement

    11. Large jaw of 30mm

    12. Data hold

    13. LCD backlight

    14. Auto power off

    15. 1m drop proof

    16. Complies with CE (European Union) directives

    SKU: n/a