-4%

UT262A Non-Contact Phase Detector

Availability:

10 in stock


UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.

21,600 22,600

10 in stock

Compare

UT262 series adopts clamp type non-contact measuring method, which means user doesn’t need to get in touch with high-voltage exposed wires. It can start detection after three super-induction and high-insulation clamps clamp the exterior of the three-phase wires, which is safer, more practical, and more effective. Beside phase sequence detection, UT262 series can be also used for live wire detection, simple electrical inspection, phase identification, missing-phase judgment, and wire breaker searching. It is a perfect tool for phase sequence detection, motor mounting, and wires maintenance.

SKU: 22000 Category:
Weight 0.2 kg
Dimensions 7 × 7 × 3 cm
General Functions Range Accuracy
Type   UT262A
Phase Sequence 【Positive Phase】indicated by four phasedetecting lights turn on clockwise and non-continuous beeping sound.
【Negative phase】indicated by four phase detecting lights turn on anti-clockwise and continuous beeping sound
Missing Phase Detection R-S or S-T light Off
Live Power Detection R-S or S-T light On
Circuit Break Detection R-S or S-T light Off
Voltage Detection R-S or S-T light On
AC Voltage Range (V) 70V~600V
Frequency Range (Hz) 40Hz~70Hz
Features
Clamp Open Φ1.6~Φ16mm
Display Mode LED
Power On Indication
Buzzer Indication
Auto Power Off Automatically switch off after three minutes
General Characteristics
Power 1.5V battery (5#)X 2
Product Color Red and Grey
Product Weight 180g
Product Size 70mm X 75mm X 30mm
Standard Accessories Batteries
Standard Individual Packing Blister, User manual

Brand

UNI T

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “UT262A Non-Contact Phase Detector”

There are no reviews yet.

  • ,

    [NEW] JM-Z21

    0 out of 5
    (0)
    SKU: n/a
  • MS6900S Moisture Tester

    0 out of 5
    (0)

    Professional Mini Digital Moisture Meter.It is a multifunctional detector that it is available to measure Wood Timber’s Moisture, Humidity & Temperature. Typically, via this device, the technician can measure timber, Construction Material’s Moisture, Humidity & Temperature.
    ● Depth 0~50mm
    ● MAX / MIN
    ● Sampling Rate 240ms
    ● Unit Selection %, WB, TD, ℃, ℉, %RH
    ● Display Backlight
    ● Data Hold
    ● Auto Power Off
    ● Low Battery Display
    ● Materials Moisture Range :
    1: (8.5~60%) Beech, Spruce, Larch, Birch, Cherry, Walnut
    2: (6.8~53.4%) Oak, Cedar, Maple, Ash Tree, Pink Shower Tree, Tamarisk
    3: (0.9~24.5%) Smoothing Cement, Concrete
    4: (0.0~12.2%) Anhydrite Screed
    5: (0.7~9.2%) Cement Mortar
    6: (0.5~11.1%) Lime Mortar, Plaster
    7: (0.0~17.8%) Brick

    SKU: n/a
  • UT658LOAD USB Testers

    0 out of 5
    (0)

    Features of UT658 Series USB Testers

    Certifications: CE, UKCA

    ● Type-A/C interface

    ● CE certification

    ● 10 sets of data storage

    ● Loop equivalent resistance measurement (1-480Ω)

    ● Same screen shows voltage, current, power, capacity, etc.

    ● Support fast charge protocol

    SKU: n/a
  • JM-Z20 Plastic Components Storage Box

    0 out of 5
    (0)

    Features: 

    • Product made of PP plastic.
    • Dismountable inner lining with different sizes can meet all your storage needs.
    • Two-layer design, make full use of space.
    SKU: n/a