-
×
UNI-T ut3516 dc resistência tester miliohmímetro ohmímetro micro teste de resistência
- Vendor:
superworld
Subtotal: ₨210,000
-8%
Rework & Soldering Station
YH 853D 2A Rework Station All IN 1
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
₨20,400 ₨22,111
- 1). The product uses double-sided fiberglass circuit board material, the components installation processes are performed orderly to ensure the clarity of electric signal flow.
- 2). Fan’s airflow capacity, Soldering Iron and Hot air rework’s temperature are all adjustable, the power supply voltage is shown on the LED digital display, and it is constantly updated.
- 3). Soldering iron, Hot air rework and dc power supply are using independent dual-core micro-controller, which means they can work independently, when the problem occurs on one tool it does not affect the others. Dual-core CPU is used to avoid failures.
- 4). Hot air rework, soldering iron are equipped by variety of fault protection
| Weight | 4 kg |
|---|---|
| Dimensions | 25 × 19 × 14 cm |
Technical data:
Rated voltage: AC 220V±10% 50HZ ( 110V±10% 50HZ)
Whole machine Power Consumption: ≤800W
Work environment: 0-50°C
|
Iron parts |
Gun parts |
DC power supply partsA |
|
work Voltage :AC:26V±10% 50HZ |
work Voltage: AC:220V±10% 50HZ\( 110V±10% 50HZ) |
work Voltage:AC 220V±10% 50HZ\ ( 110V±10% 50HZ) |
|
Output power:50W±10% |
Output power:600W±10% |
Output power:15W/30W |
|
Temperature range:200°C-480°C |
Temperature range:100°C-480°C |
Output voltage:0-15V |
|
Temperature stability:±2°C |
Temperature stability:±2°C |
Load stability:<0.01±2mv |
|
Tip of ground impedance<2ohm |
Gun type:Diaphragm pump
Airflow is focus on it,24L~28L/Min |
recovery time:<100us |
| Tip of ground voltage: <2mV | Gun heater resistance:90Ω |
Ripple dB<1mvrms (virtual value) |
| Iron Heater material: Common heater |
Gun heater material:Nickel-alloys |
Temperature coefficient:<300PPm/°C |
| Iron handle:Black handle |
Protection starting current:>standard value 10% |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 853D 2A Rework Station All IN 1”
-
Clamp Meters
UT 207 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate 2. True RMS 3. Inrush current 4. Zeroing function 5. Full icon display 6. MAX/MIN 7. Data hold; Duty cycle 8. Auto power off and low battery indication 9. Diode; Continuity buzzer; Input Impedance for DCV
SKU: n/a -
Food Temperature Meter
UT A61 Food Temperature Meter
Specifications A61 Measurement range -40℃~250℃ (-40℉~482℉) Accuracy ±1℃ (-20℃≤T＜100℃) ±2℃ (T＜-20℃; T≥100℃) ±2℉ (-4℉≤T＜212℉) ±4℉ (T＜-4℉; T≥212℉) Minimum measuring depth 12mm Sensor NTC Stabilization time 20s Resolution 0.1℃ (0.1℉) Power 3V button cell×1 (CR1632) Battery duration 12h Operating temperature 0℃~40℃ (32℉~104℉) Storage temperature -20℃~60℃ (-4℉~140℉) Operating humidity ＜RH80% (No condensable) General Characterisitics Power 3V battery (CR1632) Display 26.6mm x 10.6mm Product color White and grey Product net weight 50.8g Product size 190mm x 29.5mm x 15.5mm Standard accessories Battery Standard individual packing Blister, English manual Standard quantity per carton 40pcs Standard carton measurement 520mm x 210mm x 280mm Standard carton gross weight 5kg SKU: n/a -
Multimeters
MF 47E Analog Multimeter
MF47E series of meters is were based on the original MF47 meter.
Then it developed multi-functional, multi-purpose and multi-protection series products.
For the characteristics of various types of users, it combinated the function of the optimal to facilitate the use of users and improved its cost-effective.
It was Engaged in computer
- electrical equipment
- household appliances
- electrical and electronic factories
- schools of scientific research
- production
- maintenance and repair people, they all can choose the right product in the MF47 series
SKU: n/a -
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Multimeters
YX 960 Analog Multimeter
- Excellent DC resolution factor of 2mV
- Expended resistance measurement of 20 to200M
- Series capacitor DC to enable measurement of only AC components
- A large and bright meter with a scale length of 80mm
- The sensitivity of 44pA at full scale
- Fuse and Diode protection
- Measure HFE of transistor directly
SKU: n/a -
DC Power Supplies
UTP1306 DC Power Supply
Specifications Model UTP1306 Output voltage 0~32V Output current 0~6A Output power 192W Load regulation CV＜0.1%+5mVCC＜0.2%+3mA Accuracy(25℃±5℃) Voltage ＜0.1%+5mV Current ＜0.2%+3mA Ripple and noise ≤1mVrms Output regulation resolution Reliability CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs Display mode LED voltage and current dual display Feature Auto conversion of constant voltage and current with current limit protection General Characteristics Power Input voltage: 110V AC/220V AC; 50Hz~60Hz Product color White and grey Product net weight 2.5kg Product size 80mm x 150mm x 230mm Standard accessories Power cord, output cables SKU: n/a
Related products
-
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Rework & Soldering Station
YH 853D 5A-II ALL IN 1 REWORK STATION
A multi-station that fully integrates 3 professional stations that satisfy a broad range of soldering, reworking, and testing applications. Professional all-round performance and user experience for flexible applications. Advanced technologies, including precision temperature stabilization, temperature calibration, sleep mode, zero-airflow protection, automatic shut-down, and more
SKU: n/a -
Rework & Soldering Station
YH 938D SMD STATION
1.High-power heater, tweezers parallel design. When need to remove the electronic components, you can use the parallel tweezers to heating the components and weld joints. It is easily and quickly to removed element without prejudice to the case of peripheral devices. It is used for different weld joints de-soldering ,more suitable for large joints, especially for factory batch job, one time can weld two points, it’s high efficiency.
2.Programmable temperature control, PID technology, the most high-precision PID implant procedures, tracking and detection of high-speed machine tweezers actual temperature and corrected. Magic temperature compensation speed so that the temperature error is small, temperature stability and temperature compensation is much faster than the same type of product.
3. To meet the market needs of different regions, the addition of Fahrenheit / Celsius temperature conversion function, the user can choose according to customary interest.
4.10 minutes fixed sleep function, up to 10 minutes without the use of iron, automatically enter sleep mode, energy and prolong tip life.
5.Parallel electric tweezers design, very convenient for small electronic components,chip, chip removal and installation of welded components. When you need to remove the parallel electric tweezers can be used directly on the welding points across the resistor components for heating.SKU: n/a -
Rework & Soldering Station
YH 948D Soldering Iron
YH 948D adopts PID programmable temperature control technology with an implantable highest-precision PID program for high-speed tracking and detection of the actual desoldering gun and soldering iron temperatures with real-time temperature correction. Yihua Desoldering Station comes in 3 in 1 design that Combines real 90W High Frequency and High Power Soldering, 130W High-Frequency Desoldering , and Vacuum Pick Up functions in a compact body..
Features Of YIHUA 948D 130W High-frequency Desoldering Station:
- Adopts PID programmable temperature control technology
- Equipped with a suction pen to help remove IC.
- The anti-static design prevents electrostatic component damage or leakage.
- Adopts an isolation transformer for power supply to heating elements and automatic shutoff functionality when the high-frequency soldering iron handle or desoldering gun handle is removed for safety and reliability.
- A portable built-in vacuum with strong suction does away with external vacuum systems.
SKU: n/a
There are no reviews yet.