YH 939BD+ SOLDERING STATION
Out of stock
| MODEL | 939BD+ |
| RATED VOLTAGE | AC 220V±10% 50Hz |
| OUTPUT POWER | 75W |
| Constant Temperature Power (High-Speed PID Programmed to Energy Savings) | 200W±10％ |
| Withstand voltage and insulation tests | AC1500V 0.4A 60S |
| Operating Environment | 0～40℃ relative humidity＜80％ |
| Storage environment | －20～80℃ relative humidity＜80％ |
| Body size | 14.5*12*8CM |
| Weight | 2.17KG |
| Work voltage | AC 26V±10% 50Hz |
| Temperature range | 200℃～480℃ |
| Temperature Stability | ±1℃（Static） |
| Display Mode | Red LED Digital Display |
| Calibration Mode | PID Digitally Programmed Calibration |
| PID Temperature Calibration Cycle | 100MS |
| Heating Core | Imported High-Powered Heating Core |
| Tip-to-Ground Impedance | ＜2Ω |
| Tip-to-Ground Voltage | ＜2mV |
₨6,148 ₨8,987
Out of stock
Compare1.Temperature controls utilize core technology, adopting microprocessor-PID programming for high-speed 100ms real-time tracking of soldering iron tip temperatures, with real-time calibration! Outlet temperatures are extremely stable.
2.The heating element employs an imported high-power heating element for fast temperature compensation, particularly suitable for desoldering crude terminals, large joints, and difficult to reach spots, not to mention general solder joint desoldering.
3.An anti-static design effectively prevents damage to delicate components;
4.Automatic fault detection and alarm functions;
5.Employs new solid-mold manufacturing processes, withstanding voltage and drop damage; employs a blue ferroalloy soldering iron base for durability.
6.YH soldering iron handle wire employs a high-temperature silicone wire (undamaged when 300o soldering tip contacts silicone wire for 30 seconds);
YIHUA939BD+ have above all function, also additional below function:
a)Sleep Function: The soldering iron automatically detects when it is unattended and not in use, pauses for a set duration prior to sleep mode, and automatically cools to 200 ℃. It will then enter sleep mode to prevent soldering iron oxidation and effectively extend soldering iron head service life while retaining energy savings and environmental protection. The sleep time ranges from: 0~99 minutes, in 1 minute intervals. Users can set the time according to personal usage patterns. If the sleep function is not necessary for the soldering iron, the sleep time should be set to 0.
b)Auto-OFF Function: Once the soldering iron enters sleep mode, the program will start to keep track of time. If the soldering iron has not been activated before the set off time, it will automatically shut off to safe energy and protect the environment. The auto-off time ranges from: 0~99 minutes, in 1 minute intervals.
c)Celsius/Fahrenheit Display Temperature Function: To satisfy market demand in different regions, the Company has designed a temperature display mode.
| Weight | 2.1 kg |
|---|---|
| Dimensions | 36 × 17 × 11 cm |
Brand
YIHUA
Based on 0 reviews
Be the first to review “YH 939BD+ SOLDERING STATION”
-
Rework & Soldering Station
YH 898BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W 300℃ Constant Temperature Power (High-Speed PID Programmed to
Energy Savings)
250W±10％ Operating Environment 0～40℃ Relative humidity＜80％ Storage temperature －20～80℃ Relative humidity＜80％ Dimensions 13.5*15*10cm weight 2.65KG SKU: n/a -
Multimeters
UT161B Digital Multimeter
Specifications Range UT161B Certifications CE/RoHS/cETLus Safety ratings CAT III 1000V/CAT IV 600V AC voltage (V) 1000V ±(1%＋3) DC voltage (V) 1000V ±(0.5%＋3) AC current (A) 10A ±(1.2%＋5) DC current (A) 10A ±(1%＋2) Resistance (Ω) 60MΩ ±(1%＋2) Capacitance (F) 60mF ±(3%＋5) Frequency (Hz) 10MHz ±(0.1%＋4) Duty cycle (%) 0.1%~99.9% ±(2%＋5) Display count 6000 Bandwidth (Hz) 40Hz~500Hz Analog bar 31 General Characteristics Power 1.5V battery (R03) x 4 Product net weight 350g Product size 190mm x 90mm x 50mm Standard accessories Battery, gold plated test leads, USB cable, English manual Standard individual packing Gift box, cloth bag Standard quantity per carton 20pcs Standard carton measurement 480mm x 370mm x 365mm Standard carton gross weight 15.2kg Optional accessories Bluetooth/APP SKU: n/a -
Infrared Thermometer
UT301C+ Infrared thermometer
1. 12:1 D:S ratio
2. Adjustable emissivity 0.1~1.03. ±1.5℃ temperature measurement accuracy4. User defined visual and audio alarm5. High contrast EBTN color display6. MAX/MIN/AVG/DIFF/Hold modes7. Dual lasers (UT301C+)8. Temperature recording up to 99 groups (UT301C+)9. Date/time display (UT301C+)10.Time scheduled measurement (UT301C+)SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Rework & Soldering Station
YH 8508D Hot Air Rework Station
- 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
- 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
- 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
- 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
- 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
SKU: n/a
Related products
-
Rework & Soldering Station
YH 853D 5A-II ALL IN 1 REWORK STATION
A multi-station that fully integrates 3 professional stations that satisfy a broad range of soldering, reworking, and testing applications. Professional all-round performance and user experience for flexible applications. Advanced technologies, including precision temperature stabilization, temperature calibration, sleep mode, zero-airflow protection, automatic shut-down, and more
SKU: n/a -
Rework & Soldering Station
YH 8508D Hot Air Rework Station
- 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
- 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
- 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
- 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
- 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
SKU: n/a -
-
Rework & Soldering Station
YIHUA 937D Repairing Soldering Iron
Standard Configuration
Main unit 1set
Soldering iron handle (include iron tips and heater) 1pc
Iron holder 1pc
High temperature resistant sponge 1pc
Manual 1pc
Power plug :1pc
Application Scope
Production lines for electronic products ,.
2. Repair industry for moblie phone.
3. SMD components requiring the highest precision.
SKU: n/a
There are no reviews yet.