4 in stock
₨434,256 ₨436,000
4 in stock
CompareUPO3000E series ultra-phosphor oscilloscopes can realize functions of deep storage, high waveform capture rate, real-time waveform recording and playback, multi-level intensity grading display, and more with UNI-T special 3D technology. Some competitive features are, 250MHz/150MHz bandwidth, up to 2.5GS/s real-time sampling rate, 2/4 channels, 70Mpts standard memory depth, higher than 200,000wfms/s waveform capture rate, more than 100,000 waveforms continuous recording and analysis, up to 256 levels intensity grading display. They can be operated with a standard 25MHz dual-channel function/arbitrary waveform generator or an optional digital multimeter module (UT-M12).
| Weight | 4.2 kg |
|---|---|
| Dimensions | 37 × 19 × 12 cm |
| Specifications | |
| Model | UPO3254E |
| Analog bandwidth | 250MHz |
| Channels | 4 |
| Sampling rate | 2.5GS/s (Single channel), 1.25GS/s (Dual channels/Four channels) |
| Memory depth | Each channel: auto, 7kpts, 70kpts, 700kpts, 7Mpts, 70Mpts selectable (open the 4 channels at the same time) |
| Waveform capture rate | 200,000wfms/s |
| Time base scale (s/div) | 2ns/div~40s/div (Real-time sampling rate, memory depth display)【Step by 1-2-4 stall】 |
| Input impedance | (1MΩ±1%) II (18pF±3pF) |
| Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
| DC gain accuracy | <5mV: ±3%, ≥5mV: ±2% |
| Waveform record | Single channel: 100,000 frames; Adjustable interval: 1.00ms~1000s |
| Trigger types | Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slope, Video, Code; RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay |
| Bus decode | RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay |
| Waveform operations | A+B, A-B, AxB, A/B, FFT, editable advanced and logical operations |
| Auto measurements | Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, Rise Delay, Fall Delay, +Width, -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in total |
| Measurement display | 5 types |
| Measurement statistics | Average, Max, Min, standard deviation and number of measurements |
| Frequency counter | 6 bits |
| Interfaces | Standard: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), VGA Optional: AWG |
| General Characterisitics | |
| Power | 100V~240V ACrms, 50Hz/60Hz |
| Display | 8-inch TFT LCD, WVGA (800 x 480) |
| Product color | White and grey |
| Product net weight | 4.2kg |
| Product size | 370mm x 195mm x 125mm |
| Standard accessories | Probe x 2/4 (1x, 10x switchable), power cord, USB interface cable, PC software CD |
| Standard individual packing | Carton box |
| Standard quantity per carton | 2pcs |
| Standard carton measurement | 490mm x 480mm x 300mm |
| Standard carton gross weight | 11kg |
Feature
303D communication maintenance power supply is a single line output of stabilized high accuracy
DC stabilized power supply. The output voltage and current can be adjusted continuously within the
rated range. The load current has MA conversion with two settings: 0-3A and 0-99 mA. Constant
voltage and constant current (CV/CC), automatic switching of working modes. Double digital display
shows output voltage and current independently. Several protection functions include current
limitation, voltage reduction, short circuit protection, over-temperature protection, etc. The design
is applied to production line of the plant, maintenance, laboratories and is also a necessary device
for the communication industry.
1. 40,000 counts, and basic DCV accuracy of 0.025%
2. Can set the interval for auto data recording
3. MAX/MIN/REL measurement mode
4. Peak hold
5. Analogue bar graph
6. Measure AC and DC in the same stall (AC+DC)
7. 4-20mA loop test
8. 45Hz~100kHz frequency response measurement
9. Double backlight
10. Misplug alarm
11. Auto and manual ranges selectable
12. USB interface available
13. Bluetooth connection with a cellphone for data monitoring
14.Power measurement mode
15. Temperature measurement mode, equipped with K-type point contact temperature probe
16. Complies with CE (European Union) and UL (United States) directives
| Screen Display | 3.5″IPS |
| Temeperature Range | -40°~400° |
| IR Resolution(Pixels) | 320×240 |
| Visible Camera Resolution | 2MP |
| Field of View(FOV) | 56°x 42° |
| Spatial Resolution(IFOV) | 3mrad |
| Frame Rate | 9Hz |
| Thermal Sensitivity(NETD) | 65mK |
| Measurement Accuracy | ±2° or ±2% whichever is greater |
| Emissivity | 0.01-0.99 Adjustable |
| Spectral Range | 8~14μm |
| Foucs | Foucs Free |
| Digital Zoom | 2x, 4x |
| Palattes | 7(Iron, Rainbow, White Hot, Red Hot, Black Hot, Lava, Rainbow HC) |
| Display Modes | Thermal,Visible,Fusion,PIP |
| Mesurement Mode | Center Pot,High/Low Temp Pot,ROI |
| Temperature Analysis | (Point 5 /Line 1 /Area 6 ) total 6 tools |
| Battery | Li-ion battery pack 5200mAh |
| Battery Type | Replaceable |
| Battery Life | ≥ 4hours |
| Charging Time | ≤5Hours |
| Communication interface | Type-C |
| IP Rating | IP54 |
| Drop Proof | 2m |
| Functions | |
| Flashlight | √ |
| Tripod Hole | √ |
| Auto tracking of High/Low Temperature | √ |
| Auto Alarm of High/Low Temperature | √ |
| Image Capture | √ |
| Video Recording | × |
| Voice Recording | × |
| RIO(Eliminates Interference) | √ |
| Isotherm | √ |
| PC Real Time Image Transmisstion | √ |
| PC Analysis Software | √ |
| Wifi Photo Download | √ |
| Wifi Real Time Display | × |
| Bluetooth | × |
| Mobile APP | √ |
| GPS | × |
| Laser/Distance Measurement | × |
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. Special Print Scree Feature;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 28 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
Product Features:
1、 Fully Auto Scale; Vertical Scale and Timebase automatically adjusted with the signal and without any manual interference;
2、 Unique and powerful Auto Setup, quick and accurate to set up for signals with any DC component;
3、 Wider voltage measuring range; Coupled with 10×probe with attenuation up to 200V/div;
4、 Isolated USB for much safer communication;
5、 White and black display for your option, perfect for use outdoors with strong light;
6、 Intelligent local or network software update；
7、 More than 8hours of continuous battery operation.
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. The new interface style;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 32 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
[NEW] JM-Z21 
UT 39E+ Modern Digital Multimeter 
UT230B-EU Power Socket 
CLAMP METER AC BM 819 
Mechanic Soldering Flux Paste 42Gram Lead Free Soldering Tin V5B45 Solder Welding Paste 
There are no reviews yet.