UPO3254E Ultra Phosphor Oscilloscope
4 in stock
₨434,256 ₨436,000
4 in stock
CompareUPO3000E series ultra-phosphor oscilloscopes can realize functions of deep storage, high waveform capture rate, real-time waveform recording and playback, multi-level intensity grading display, and more with UNI-T special 3D technology. Some competitive features are, 250MHz/150MHz bandwidth, up to 2.5GS/s real-time sampling rate, 2/4 channels, 70Mpts standard memory depth, higher than 200,000wfms/s waveform capture rate, more than 100,000 waveforms continuous recording and analysis, up to 256 levels intensity grading display. They can be operated with a standard 25MHz dual-channel function/arbitrary waveform generator or an optional digital multimeter module (UT-M12).
| Weight | 4.2 kg |
|---|---|
| Dimensions | 37 × 19 × 12 cm |
| Specifications | |
| Model | UPO3254E |
| Analog bandwidth | 250MHz |
| Channels | 4 |
| Sampling rate | 2.5GS/s (Single channel), 1.25GS/s (Dual channels/Four channels) |
| Memory depth | Each channel: auto, 7kpts, 70kpts, 700kpts, 7Mpts, 70Mpts selectable (open the 4 channels at the same time) |
| Waveform capture rate | 200,000wfms/s |
| Time base scale (s/div) | 2ns/div~40s/div (Real-time sampling rate, memory depth display)【Step by 1-2-4 stall】 |
| Input impedance | (1MΩ±1%) II (18pF±3pF) |
| Vertical scale (V/div) | 1mV/div~20V/div (1MΩ) |
| DC gain accuracy | <5mV: ±3%, ≥5mV: ±2% |
| Waveform record | Single channel: 100,000 frames; Adjustable interval: 1.00ms~1000s |
| Trigger types | Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slope, Video, Code; RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay |
| Bus decode | RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay |
| Waveform operations | A+B, A-B, AxB, A/B, FFT, editable advanced and logical operations |
| Auto measurements | Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, Rise Delay, Fall Delay, +Width, -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in total |
| Measurement display | 5 types |
| Measurement statistics | Average, Max, Min, standard deviation and number of measurements |
| Frequency counter | 6 bits |
| Interfaces | Standard: USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), VGA Optional: AWG |
| General Characterisitics | |
| Power | 100V~240V ACrms, 50Hz/60Hz |
| Display | 8-inch TFT LCD, WVGA (800 x 480) |
| Product color | White and grey |
| Product net weight | 4.2kg |
| Product size | 370mm x 195mm x 125mm |
| Standard accessories | Probe x 2/4 (1x, 10x switchable), power cord, USB interface cable, PC software CD |
| Standard individual packing | Carton box |
| Standard quantity per carton | 2pcs |
| Standard carton measurement | 490mm x 480mm x 300mm |
| Standard carton gross weight | 11kg |
Brand
UNI T
Based on 0 reviews
Be the first to review “UPO3254E Ultra Phosphor Oscilloscope”
-
Clamp Meters
CLAMP METER AC DC CM 2056
Technical data
Basic function
Range
Accuracy
DCV
400mV/4V/40V/400V/1000V
±(0.5%+5)
ACV
400mV/4V/40V/400V/750V
±(1.0%+5)
DCA
400A/1000A
±(2.0%+5)
ACA
400A/1000A
±(2.0%+5)
Resistance
400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ
±(0.8%+3)
Capacitance
4nF/40nF/400nF/4uF/40uF/200uF
±(3.5%+8)
Frequency
100Hz/1kHz/10kHz/100kHz/1MHz/10MHz
±(0.5%+4)
Temperature
(-40~ 1000) ℃ / (-40 ~1832) ℉
±(1.0%+5)
Special function
CM-2056
NCV test
√
True RMS test
√
Diode test
√
Continuity test
Less than 50Ω±10Ω
Low battery indicator
Approx. less than 2.4 V
Data hold
√
Auto power off
About 15 minutes
Function protection
√
Clamp light
√
Backlight display
√
Input impedance
10MΩ
Sampling rate
3 times/s
AC frequency response
Current 50-60Hz/ voltage 50-400Hz
Operation method
Auto or manual range
Max display
4000
Clamp opens
52mm
Battery
3V (2*AAA battery)
General Characteristic
Meter color
Orange and Black
Meter weight
About 280g (including battery)
Meter size
270×123×50mm
Standard accessory
Test leads, battery, manual, TP01 temperature probe
SKU: n/a -
Environment Meters
UT361 Anemoscopes
UT360 series anemograph is a professional anemograph used to measure wind temperature, wind speed and wind capacity, which is of stable performance, reliable and of neoteric appearance. The device can be widely used in the fields such as environmental protection, labor hygiene, industrial enterprise, scientific research. It is applied to environmental noise measurement, machinery equipment noise and architectural acoustics measurement.
SKU: n/a -
Process Celibrators
UT725 Multifunction Process Calibrator
Features of UT725 Multifunction Process Calibrator
Certifications: CE, UKCA
● Step/ramp functions
● Source and measure accuracy up to 0.02%● Rechargeable battery● Contrast adjustment● Auto power off (Time adjustable)● Stores and recalls setups● USB communication● Simultaneously measure and output different process signal in real time● Pressure measure with specified pressure modules, and sourcing pressure● Provides 24V loop power to transmitter while conducting mA current measurement at the same timeSKU: n/a -
Multimeters
UT195M Professional Digital Multimeter
Features
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. True RMS
4. ACV 750V 5kHz bandwidth
5. Flashlight
6. Auto LCD backlight controlled by light sensor (can be turned off)
7. LoZ voltage test, for ghost voltage measurement
8. Motor phase sequence measurement with 2 probes
9. 20A current measurement (max 30 seconds)
SKU: n/a
Related products
-
Oscilloscopes
UTD2102CEX Digital Storage Oscilloscope
1. Dual analog channels width range 1mV/div~20V/div;
2. 7 inches widescreen LCD displays;
3. The new interface style;
4. Supports plug-and-play USB storage device. Communication with and remote control of computer through the USB device;
5. USB drive system software upgrade;
6. Storage of waveforms setups and interfaces waveforms and setups reproduction;
7. Automatic measurement of 32 waveform parameters;
8. Unique waveform recording and replay function;
9. Multilingual menu displays.
SKU: n/a -
Oscilloscopes
Digital Storage Oscilloscope UTD2202CM
Specifications and features:
1. 2 channels,1GS/s sample rate
2. 200MHzbandwidth, 16Mpts maximum memory depth
3. Waveformacquisition rate is up to 150,000wfms/s
4. Verticalsensitivity: 2mV/div~5V/div
5. Time-basedrange: 2ns/div~50s/div
6. Trigger modes:edge, pluse, runt, video, slope, alternate
7. Customized AUTO,fast captures the signals
9. Supports Y-T andX-Y mode at the same time, can observe Lissajous waveform
10. 34 kinds ofauto measurements
11. Optional LAmodule
12. Standardinterfaces: USB Host，USBDevice，Pass/Fail
13. 7-inch TFT LCD，WVGA (800*480)
SKU: n/a -
Oscilloscopes
UTD1202C Handheld Digital Storage Oscilloscope
Specifications Model UTD1202C Bandwidth 200MHz Channels 2 Sampling rate 1GS/s Rise time ≤1.8ns Memory depth 7.5kpts Vertical sensitivity 5mV/div~50V/div Time base scale 2ns/div-50s/div Storage modes Setup, waveform, bitmap Trigger modes Edge, pulse width, video and alternative Interfaces USB host, USB OTG (UTD1202C Optional) Multimeter Specifications Range Accuracy DC voltage (V) 600mV/6V/60V/600V/1000V ±(1%+5) AC voltage (V)(45Hz~400Hz) 600mV/6V/60V/600V/700V ±(1.2%+5), Frequency: ＜200Hz ±(1.5%+5), Frequency: ≥200Hz DC current (A) 6mA/60mA/600mA ±(1.2%+5) 6A ±(1.5%+5) AC current (A)(45Hz~400Hz) 6mA/60mA/600mA ±(2%+5) 6A ±(2.5%+5) Resistance (Ω) 6kΩ/60kΩ/600kΩ ±(1.2%+5) 600Ω/6MΩ/60MΩ ±(1.5%+5) Capacitance (F) 6nF/6mF ±(5%+10) 60nF/600nF/6μF/60μF/600μF ±(4%+5) Display count 6000 Auto range √ General Characteristics Power Li-ion battery: 7.4V 4400mAh; DC adapter: 100~240V 50/60Hz input, 9V/4A output Display 5.7 inches TFT LCD, QVGA (320×240) Product net weight Red and grey Product color 1.8kg Product size 268mm x 168 mm x 60mm Standard accessories Probe x2 (1x, 10x switchable), current voltage converter, power cord, adapter, test leads Standard individual packing Carton box, carrying bag Standard quantity per carton 4pcs Standard carton measurement 500mm x 400mm x 320mm Standard carton gross weight 16.7kg SKU: n/a -
Oscilloscopes
UTD1050DL Handheld Digital Storage Oscilloscopes
Product Features:
1、 Fully Auto Scale; Vertical Scale and Timebase automatically adjusted with the signal and without any manual interference;
2、 Unique and powerful Auto Setup, quick and accurate to set up for signals with any DC component;
3、 Wider voltage measuring range; Coupled with 10×probe with attenuation up to 200V/div;
4、 Isolated USB for much safer communication;
5、 White and black display for your option, perfect for use outdoors with strong light;
6、 Intelligent local or network software update；
7、 More than 6 hours of continuous battery operation.SKU: n/a
There are no reviews yet.