UT 206B Digital Clamp Meter
10 in stock
| Specifications | Range | UT206B |
| AC current (A) | 1000A | ±(2%+5) |
| AC current frequency response | 50Hz~60Hz | |
| Inrush current (A) | 1000A | ±(10%+10) |
| AC voltage (V) | 6V | ±(1.2%+3) |
| 60V/600V/1000V | ±(1%+8) | |
| DC voltage (V) | 600mV | ±(0.8%+3) |
| 6V/60V | ±(0.5%+5) | |
| 600V | ±(0.5%+5) | |
| 1000V | ±(0.5%+5) | |
| Low pas filter (LPF ACV) | 600V/1000V | ±(2%+5) |
| AC voltage frequency response | 40Hz~400Hz | |
| LoZ ACV | 600V/1000V | ±(2%+5) |
| Resistance (Ω) | 600Ω | ±(1%+3) |
| 6KΩ/60KΩ/600KΩ | ±(1%+2) | |
| 6MΩ/60MΩ | ±(2%+8) | |
| Capacitance (F) | 60nF | ±(4%+25) |
| 600nF/6μF/60μF/600μF | ±(4%+5) | |
| 6mF/60mF | ±(10%+9) | |
| Temperature (℃) | -40℃~300℃ | ±(1%+20) |
| 300℃~1000℃ | ±(1%+2) | |
| Low voltage frequency (Hz) | 10Hz~1MHz | ±(0.1%+3) |
| Duty cycle (%) | 10%~90% | ±(2.6%+7) |
| Features | ||
| Display count | 6000 | |
| Jaw opening | 42mm | |
| Current frequency | 50Hz~60Hz | |
| High voltage frequency | 40Hz~400Hz | |
| Analog bar | 31 | |
| Auto power off | √ | |
| Continuity test | √ | |
| Auto/Manual range | √ | |
| Low battery indication | √ | |
| Diode test | √ | |
| Relative mode/Data hold | √ | |
| MAX/MIN | √ | |
| Function selection | √ | |
| Flashlight | √ | |
| Wake-up function | √ | |
| Auto power off current: ＜50μA | √ | |
| Flexible current probe (optional) | Extends to 3000A | √ |
| Input impedance (ACV/DCV) | ≥10MΩ | √ |
| General Characteristics | ||
| Power | 1.5V battery (R03) x 3 | |
| Display | 43mm x 45mm | |
| Product color | Red and grey | |
| Product net weight | 465g | |
| Product size | 272mm x 81mm x 43.5mm | |
| Standard accessories | Test leads, batteries, point contact temperature probe | |
| Standard individual packing | Gift box, carrying bag, English manual | |
| Standard quantity per carton | 10pcs | |
| Standard carton measurement | 355mm x 330mm x 315mm | |
| Standard carton gross weight | About 7.1kg | |
₨16,800 ₨16,895
10 in stock
CompareUT200 series are 6000-count digital clamp meters with auto range, large LCD, true RMS, auto scale memory, and NCV functions. They conform to CAT III 1000V/CAT IV 600V safety rating and certified by CE/ETL. The UT206B, UT207B, and UT208B come with LoZ mode for eliminating ‘ghost ’voltage, LPF ACV function for measuring INV and VFD voltage, and inrush current mode for capturing transient current. The UT206B and UT208B also feature high-precision temperature measurement with 0.1 °C resolution, and can be equipped with a flexible current probe to extend the AC current measurement range to 3000A.
1. Flashlight button: Short press this button to turn on/off the flashlight.
| Weight | 0.45 kg |
|---|---|
| Dimensions | 27 × 8 × 4 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT 206B Digital Clamp Meter”
-
Arbitary Waveform Generator
UTG2122B Function/Arbitrary Waveform Generator
Specifications UTG2122B Max frequency 120MHz Channels 2 Sampling rate 320MS/s Waveforms Sine, square, ramp, pulse, noise, DC, arbitrary; UTG2000B only: harmonic Working modes Output on/off, continuous, modulation, sweep, burst Modulations AM, FM, PM, ASK, FSK, PSK, PWM, BPSK, QPSK, OSK, DSB-AM, SUM, QAM Arbitrary Waveform Length 8pts~16Mpts Vertical resolution 16 bits (symbol included) Frequency Characteristics Sine 1μHz~60MHz Square 1μHz~25MHz Pulse 1μHz~20MHz Ramp 1μHz~3MHz Harmonic 1μHz~30MHz Arbitrary 1μHz~15MHz Noise 60MHz (-3dB) Resolution 1μHz Accuracy ±0.5ppm 25℃ First year aging rate: 1ppm Temperature coefficient: ±0.5ppm/℃ Temperature Coeifficient ＜2ppm/℃ Interfaces USB Host, USB Device, 10MHz clock source input/output General Characteristics Power 100V~240V ACrms, 50Hz/60Hz Display 4.3-inch TFT LCD, WVGA (480 x 272) Product color White and grey Product net weight 3.2kg Product size 265mm x 110mm x 320mm Standard accessories BNC-BNC cable, BNC cable with alligator clips, power cord, USB interface cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 380mm x 330mm x 320mm Standard carton gross weight 8.5kg SKU: n/a -
Multimeters
MF 47E Analog Multimeter
MF47E series of meters is were based on the original MF47 meter.
Then it developed multi-functional, multi-purpose and multi-protection series products.
For the characteristics of various types of users, it combinated the function of the optimal to facilitate the use of users and improved its cost-effective.
It was Engaged in computer
- electrical equipment
- household appliances
- electrical and electronic factories
- schools of scientific research
- production
- maintenance and repair people, they all can choose the right product in the MF47 series
SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Rework & Soldering Station
YH 899D-II REWORK STATION
PARAMETERSPower consumption 720W Gun Temperature range 100-480°C Gun heater material Ferro-alloys Gun heater resistance 74Ω Gun type Brushless Fan air flow 120L/min Soldering Iron Temperature range 200-480°C soldering Iron Type Blue Handle Soldering Iron Heater material Imported high-power heater Soldering Iron heater power 60W Gross weight 3.3KG/pcs Inner box Dimension(cm) 29*20*18 Outer box Dimension(cm) 59.5*41*36 QTY 8PCS PER outer carton SKU: n/a -
-
DC Power Supplies
UTP1306 DC Power Supply
Specifications Model UTP1306 Output voltage 0~32V Output current 0~6A Output power 192W Load regulation CV＜0.1%+5mVCC＜0.2%+3mA Accuracy(25℃±5℃) Voltage ＜0.1%+5mV Current ＜0.2%+3mA Ripple and noise ≤1mVrms Output regulation resolution Reliability CV: 10mV (typical), CC: 1mA (typical); MTBF(e): ≥2000hrs Display mode LED voltage and current dual display Feature Auto conversion of constant voltage and current with current limit protection General Characteristics Power Input voltage: 110V AC/220V AC; 50Hz~60Hz Product color White and grey Product net weight 2.5kg Product size 80mm x 150mm x 230mm Standard accessories Power cord, output cables SKU: n/a
Related products
-
Clamp Meters
UT219M ACA Professional Clamp Meters with Motor Test
- UT-219 professional clamp meter series is three-proofing digital clamp meter specially designed for professional industrial users.
- The industrial design of this series is rugged and durable, and capable of withstanding the impact from 2 meters fall-down.
- The waterproof rating is up to IP54; therefore, it can be used in environment with water splashing or much more dust. The whole series is configured with LoZ (Low Impedance Input) AC voltage tap position, which is capable of testing the false voltage; auto backlight function can be used continuously under the circumstance of emergency power outage. UT-219M is also provided with MOTOR test function, allowing to directly test the phase sequence of three phase AC motor by means of the probe. UT-219 series is much more in compliance with CAT IV 600V safety level, and certified by the German GS institution.
SKU: n/a -
Clamp Meters
UT256B ACA DCA Fork Clamp Meters
UT256 series is an AC/DC fork meter with high reliability, high security, auto-range, and mini shape. Its appearance adopts creative design so that wires to be tested can be stuck by the jaw directly instead of after the jaw is pressed to open. It can measure AC/DC current provided with true RMS function. Flashlight on the meter is specially designed for smooth measurement under darkness. Full-range overload protection and distinctive appearance design make it be a new-generation practical electrical measuring meter with better performance.
SKU: n/a -
Clamp Meters
UT210E ACA DCA Digital Clamp Meters
Main Features
1. Auto range, 2~3/s sampling rate
2. True RMS measurement
3. VFC, frequency conversion function
4. NCV, Non-Contact Voltage testing function:induce electric field strength via the jaw
5. Zero mode
6. LCD backlight, data hold
7. Auto power off, low battery indication and overload protection
8. Comfortable to hold and easy to carry with (Product weight: 160g/170g)
9. Complies with CE (European Union) directives
SKU: n/a -
Clamp Meters
UT 207 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate 2. True RMS 3. Inrush current 4. Zeroing function 5. Full icon display 6. MAX/MIN 7. Data hold; Duty cycle 8. Auto power off and low battery indication 9. Diode; Continuity buzzer; Input Impedance for DCV
SKU: n/a
There are no reviews yet.