-
×
CLAMP METER AC BM 2000B
- Vendor:
superworld
Subtotal: ₨2,551
-4%
Meter Leads
UT-L21 Probe UT-L Probes and Test Leads
Availability:
20 in stock
Leads length: 900mm
Rod length: 133mm
Tip length: 15.8mm
Safety level: CAT Ⅲ 1000V/CAT Ⅳ 600V 20A
Features and application: cross plug with shield sleeve, general type probe
Amount: 1PCS
₨840 ₨872
20 in stock
CompareLeads length: 900mm
Rod length: 133mm
Tip length: 15.8mm
Safety level: CAT Ⅲ 1000V/CAT Ⅳ 600V 20A
Features and application: cross plug with shield sleeve, general type probe
Amount: 1PCS
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 2 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT-L21 Probe UT-L Probes and Test Leads”
-
-
Clamp Meters
UT216D 600A True RMS Digital Clamp Meter
1. True RMS
2. Auto range, 3 times/s sampling rate3. MAX/MIN/Relative modes4. K-type temperature probe5. Flashlight6. 400Hz measurement7. NCV, non-contact AC voltage testing8. VFC, low pass filter9. Zeroing function10. Inrush current11. Analog bar graphSKU: n/a -
Multimeters
UNI T Bench Top Digital Multimeter UT8803E
- 20,000 Count EBTN LCD Display
- DC Voltage: 200mV/2V/20V/200V/1000V
- AC Voltage: 2V/20V/200V/750V
- DC Current: 200μA/2mA/20mA/200mA/20A
- AC Current: 2mA/20mA/200mA/20A
- Resistance: 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/200MΩ
- Capacitance: 20nF/200nF/2μF/20μF/200μF/2mF/20mF/100mF
- Frequency: 200Hz~10MHz
- Duty cycle: 5%~99%
- Frequency response: 1 kHz
- USB Interface
- Data hold
- MAX/MIN
- Continuity buzzer
- Diode/transistor
- test
- CAT II 600V
SKU: n/a
Related products
-
Meter Leads
UT L25 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- If you want to change your multimeter test lead, this is a great choice.
- Double insulated wire.
- Removable tip.
SKU: n/a -
Meter Leads
UT L28 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- Double insulated wire.
- Removable tip shield sleeve.
- Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
● Tip length: 16.8mm● Safety level: CAT III 1000V/CAT IV 600V 10A● Safety certificate: EN 61010-031 A1:2015● Features and application: Double insulated wire, removable
SKU: n/a
There are no reviews yet.