Leads length: 900mm
Rod length: 133mm
Tip length: 15.8mm
Safety level: CAT Ⅲ 1000V/CAT Ⅳ 600V 20A
Features and application: cross plug with shield sleeve, general type probe
Amount: 1PCS
20 in stock
Leads length: 900mm
Rod length: 133mm
Tip length: 15.8mm
Safety level: CAT Ⅲ 1000V/CAT Ⅳ 600V 20A
Features and application: cross plug with shield sleeve, general type probe
Amount: 1PCS
₨840 ₨872
20 in stock
CompareLeads length: 900mm
Rod length: 133mm
Tip length: 15.8mm
Safety level: CAT Ⅲ 1000V/CAT Ⅳ 600V 20A
Features and application: cross plug with shield sleeve, general type probe
Amount: 1PCS
Weight | 0.1 kg |
---|---|
Dimensions | 25 × 2 × 3 cm |
The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker
● Sound and Light Instruction
● Cont and Tone LED Light
Applications
– Judge Continuity of the Cables or Wires
– Track the Cables or Wires, and Diagnose the Break Point
– Receive the Tone Signal on the Cables or Wires(Telephone Line)
– Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
– Send a Single Solid or a Dual Alternating Tone to the Target Cables or Wires
Descriptions:
1.This is a 5999 counts automatic digital clamp multimeter,small and compact design for easy carrying.
2.Stable performance,high precision,high reliability,clear reading and overload protection.
3.It is a ideal tool and instrument,laboratory,factory,radio enthusiasts and The ideal tool for the family.
Specifications:
Brand:WINAPEX
Model: 8203
Color:Black
Jaw:40mm
Maximum display:5999
DC Voltage: 6V/60V/600V/1000V
AC Voltage: 6V/60V/600V/750V
AC Current: 60A/600A
DC Current: 60A/600A
Resistance(ohm):600Ω/6KΩ/60Ω/600KΩ/6MΩ/40MΩ
Capacitance:60nF/600nF/6uF/60uF/600uF/6mF/30mF
Frequency:10Hz/100Hz/1kHz/10Hz/100Hz/1MHz/10MHz
Temperature:(-20-1000 )℃/(0-1832 )℉
DC voltage DCV :yes
AC voltage ACV :yes
AC current ACA :yes
DC current DCA :yes
T-RMS:yes
NCV:yes
Square wave output:yes
On-Off Test :yes
Diode measurement:yes
Buzzer:yes
Zero line / Fire line test :yes
Data hold:yes
Material: Plastic, Electronic Parts
Battery: 2 x 1.5V AAA Batteries (not included)
Product size:176x67x33mm/6.86×2.61×1.29in
Product weight:305g/10.68oz
Package information:
Package weight:350g/12.25oz
Package size:210x80x35mm/8.19×3.12×1.37in
General Box Package
Package included:
1 x Clamp Meter
1 x Pair of test leads
1 x Thermocouple
1 x User Manual
Noted:
1.Cannot measure,there is no current through the ground wire,can only be measured as a single wire or zero Iine.
2.Cannot measure two or more lines at the same time.
3.A line contains two or more than two wire core can not be measured.
There are no reviews yet.