-17%
Meter Leads
UT L25 Meter Lead
Availability:
20 in stock
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- If you want to change your multimeter test lead, this is a great choice.
- Double insulated wire.
- Removable tip.
₨1,080 ₨1,308
20 in stock
CompareUNI T Probes Test Leads UT-L25 is a physical device used to connect electronic test equipment to a device under test. These UTL25 digital multimeter universal leads are used to test current, voltage, resistance, capacitance, frequency etc. Speaking in general, meter test leads (or probes) range from very simple, robust devices to complex probes that are sophisticated, expensive, and fragile. Specific types include test probes, oscilloscope probes and current probes.
● Leads length: 900mm, Rod length: 115mm
● Tip length: 18mm
● Safety level: CAT III 1000V/CAT IV 600V 10A
● Safety cetificate: EN 61010-031 A1: 2015
● Features and application: Double insulated wire, removable tip
| Weight | 0.1 kg |
|---|---|
| Dimensions | 10 × 2 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT L25 Meter Lead”
-
Meter Leads
UT L28 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- Double insulated wire.
- Removable tip shield sleeve.
- Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
● Tip length: 16.8mm● Safety level: CAT III 1000V/CAT IV 600V 10A● Safety certificate: EN 61010-031 A1:2015● Features and application: Double insulated wire, removable
SKU: n/a -
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10％ Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0～40℃ relative humidity＜80％ Storage environment －20～80℃ relative humidity＜80％ Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃～480℃ Temperature Stability ±1℃（Static） Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance ＜2Ω Tip-to-Ground Voltage ＜2mV SKU: n/a -
Wire & Cable Testers
UT18D Voltage and Continuity Tester
1. Auto power off, the conductor to be measured is greater than 12V
2. Phase rotation test3. Continuity test with buzzer and LED indication4. Low battery indication and over voltage prompt5. Flashlight6. Test live voltage without batteries7. Buzzer and silent modes available8. Auto range9. Polarity indicationSKU: n/a -
Clamp Meters
UT 208 CLAMP METER
1. 1000A AC/DC current measurement, 3 times/s sampling rate
2. True RMS3. Inrush current4. Zeroing function5. Full icon display6. MAX/MIN7. Data hold; Duty cycle8. Auto power off and low battery indication9. Point contact temperature probe10. Diode; Continuity buzzer; Input Impedance for DCVSKU: n/a -
Infrared Thermometer
UT 305R Infrared Thermometer
Instantaneous measurementHigh measurement accuracy ±0.3ºCMeasurement range 32ºC ~ 43ºCContactless measurementSound notification and LED color change based on temperature measurementAdditional LightAutonomous battery systemPossibility of tripod mountingSKU: n/a
There are no reviews yet.