-17%
Meter Leads
UT L25 Meter Lead
Availability:
20 in stock
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- If you want to change your multimeter test lead, this is a great choice.
- Double insulated wire.
- Removable tip.
₨1,080 ₨1,308
20 in stock
CompareUNI T Probes Test Leads UT-L25 is a physical device used to connect electronic test equipment to a device under test. These UTL25 digital multimeter universal leads are used to test current, voltage, resistance, capacitance, frequency etc. Speaking in general, meter test leads (or probes) range from very simple, robust devices to complex probes that are sophisticated, expensive, and fragile. Specific types include test probes, oscilloscope probes and current probes.
● Leads length: 900mm, Rod length: 115mm
● Tip length: 18mm
● Safety level: CAT III 1000V/CAT IV 600V 10A
● Safety cetificate: EN 61010-031 A1: 2015
● Features and application: Double insulated wire, removable tip
| Weight | 0.1 kg |
|---|---|
| Dimensions | 10 × 2 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT L25 Meter Lead”
-
Rework & Soldering Station
YH 862BD+ REWORK STATION
Machine parameter Rated voltage AC 220V±10% 50Hz Total Power 730W±10％（max） 300℃ Constant Temperature Power (High-Speed PID Programmed
to Energy Savings)
250W±10％ Operating Environment 0～40℃ Relative humidity＜80％ Storage temperature －20～80℃ Relative humidity＜80％ Dimensions 31.5*22*22cm weight 3.5KG Performance Parameter Hot air gun Soldering iron Operating Voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 75W temperature range 100℃～480℃ 200℃～480℃ Air Supply Mode Brushless-Motor Fan — airflow 120L/min(max) — Temperature stability ±2℃ （static） ±2℃ （static） Display Mode Red LED Digital Display Red LED Digital Display Calibration Mode PID Digitally Programmed Calibration
PID Digitally Programmed Calibration
Temperature correction PID digital program proofreading
PID digital program proofreading
SKU: n/a -
SMD Tester
UT 116A SMD Tester
Specifications Model UT116A Display count 3000 Resistance 30MΩ Capacitance 30mF Diode test 3V LED/stabilivolt About 21V/1mA Continuity Test ＜30Ω DCV 36V Auto range √ Auto scan identification √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A-＞B (Rising edge), Delay A-＞B (Falling edge), Delay B-＞A (Rising edge), Delay B-＞A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Multimeters
UT161B Digital Multimeter
Specifications Range UT161B Certifications CE/RoHS/cETLus Safety ratings CAT III 1000V/CAT IV 600V AC voltage (V) 1000V ±(1%＋3) DC voltage (V) 1000V ±(0.5%＋3) AC current (A) 10A ±(1.2%＋5) DC current (A) 10A ±(1%＋2) Resistance (Ω) 60MΩ ±(1%＋2) Capacitance (F) 60mF ±(3%＋5) Frequency (Hz) 10MHz ±(0.1%＋4) Duty cycle (%) 0.1%~99.9% ±(2%＋5) Display count 6000 Bandwidth (Hz) 40Hz~500Hz Analog bar 31 General Characteristics Power 1.5V battery (R03) x 4 Product net weight 350g Product size 190mm x 90mm x 50mm Standard accessories Battery, gold plated test leads, USB cable, English manual Standard individual packing Gift box, cloth bag Standard quantity per carton 20pcs Standard carton measurement 480mm x 370mm x 365mm Standard carton gross weight 15.2kg Optional accessories Bluetooth/APP SKU: n/a
Related products
-
Meter Leads
UT L28 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- Double insulated wire.
- Removable tip shield sleeve.
- Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
● Tip length: 16.8mm● Safety level: CAT III 1000V/CAT IV 600V 10A● Safety certificate: EN 61010-031 A1:2015● Features and application: Double insulated wire, removable
SKU: n/a
There are no reviews yet.