● Leads length: 900mm, Rod length: 128mm
UT L28 Meter Lead
20 in stock
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- Double insulated wire.
- Removable tip shield sleeve.
- Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
● Tip length: 16.8mm● Safety level: CAT III 1000V/CAT IV 600V 10A● Safety certificate: EN 61010-031 A1:2015● Features and application: Double insulated wire, removable
₨1,052 ₨1,317
20 in stock
CompareWeight | 0.1 kg |
---|---|
Dimensions | 10 × 2 × 3 cm |
Based on 0 reviews
Be the first to review “UT L28 Meter Lead”
-
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
-
Soldering Irons, Tools and Hardware
YH 947-III Soldering Iron
1.Exquisite patented design, the use of new environmentally friendly high transparent material, positive transparent, back scrub, integrated mini malist design gives the atmosphere and feel. While the handle central with a high-temperature insulation ring to prevent heat transfer to the handle effectively
2.SAFE & EFFICIENT: Non-Toxic solder, and we have tested the soldering iron worked under different circumstances, all the testing results have met the certificate test standard and showing that they work flexible with safety ensured, including the authenticity of the brought effect with the materials.
3.WE PROMISE: you can get 1 Year warranty with friendly, and replacement if there are any problems with the products itself. your 100% satisfied is our final goal.
4.Soldering iron overall stability is much higher.
5. Energy-efficient, while rapid heating, cutting temperature recovery performance.
6. Soldering iron is designed with ON/OFF switch control, works at adjustable thermostat temperature from 220°C to 480°C, fitting most universal soldering needs.
7. Use long-life lead-free solder tips, can be applied to a variety of lead-free soldering processes.
8. Anti-static design, additional alligator clip ground wire, anti-static devices to meet different requirements.
9. Adopt a common device design, easy to replace devices
10.YIHUA947-III soldering iron handle is 60W,and the iron color green, but the color have 5color for choose gray, blue, black, white, green, if do your OEM brand can not do gray color.11. YIHUA947-III adjustable soldering iron can as per you need ,can have different kits, the current we have 5 different kit, but also can as per you need choose what you want to buy kits.
SKU: n/a -
Rework & Soldering Station
YH 706 REWORK STATION
Model 706 872D+ Power Consumption 720W 720W Measurement 124*187*157MM 124*187*157MM Weight 4.5KG 4.8KG Working environment 0~50°C 0~50°C/0~122°F Storage environment -20-80°C -20-80°C Hot Air Reworks Airflow type dual-turbo blower diaphragm pump spiral wind Air Flow ≤168L/min ≤24L/min Temperature Range 100°C-480°C 100°C-480°C Temperature Stability ±1°C ±1°C Display Type Digital Display Digital Display Handle length ≥90CM ≥90CM Soldering Iron Temperature Range 200°C-480°C 200°C-480°C Temperature Stability ±2°C ±2°C Tip of ground voltage <2mv<> <2mv<> Tip ground impedance <2 ohm <2 ohm Display Type Digital Display Digital Display Handle length ≥100CM ≥100CM SKU: n/a -
Rework & Soldering Station
YH 852 (BRUSHLESS FAN) Rework Station
Machine parameter Rated voltage AC 220V±10% 50Hz Machine power 700W±10%(MAX) working environment 0~40℃ relative humidity <80% Storage temperature -20~80℃ relative humidity <80% Machine size 25.5*18.8*12.5cm weight 3.55KG Part of performance parameters Hot air gun Soldering iron Working voltage AC 220V±10% 50Hz AC 26V±10% 50Hz Output power 650W 60W temperature range 100℃~500℃ 200℃~500℃ Mode of airflow brushless fan — airflow 120L/min(max) — Temperature stability ±15℃ (static) ±10℃ (static) Display two LED (red/green) — heater Heating core ceramics heater common heater Tips to ground impedance — <2Ω Tips voltage to ground — <2mV SKU: n/a -
Rework & Soldering Station
YH 939D+ SOLDERING STATION
PARAMETROSMODEL 939D+ RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 75W Constant Temperature Power (High-Speed PID Programmed to Energy Savings) 200W±10% Withstand voltage and insulation tests AC1500V 0.4A 60S Operating Environment 0~40℃ relative humidity<80% Storage environment -20~80℃ relative humidity<80% Body size 14.5*12*8CM Weight 2.17KG Work voltage AC 26V±10% 50Hz Temperature range 200℃~480℃ Temperature Stability ±1℃(Static) Display Mode LED Digital Display Calibration Mode PID Digitally Programmed Calibration PID Temperature Calibration Cycle 100MS Heating Core Imported High-Powered Heating Core Tip-to-Ground Impedance <2Ω Tip-to-Ground Voltage <2mV SKU: n/a
There are no reviews yet.