-
×
Soldering Iron 30W hi/low
- Vendor:
superworld
Subtotal: ₨750
-16%
Meter Leads
UT-L40 SMD patch clamp
Availability:
10 in stock
- Leads length: 450mm
- Probe length: 5mm
- Temperature condition: -10°C～40°C
- Safety level: CAT Ⅱ1000V 2A
- Features and application: used to SMT components, for UT611, UT612
- Amount: 1PCS
₨1,320 ₨1,570
10 in stock
Compare- Leads length: 450mm
- Probe length: 5mm
- Temperature condition: -10°C～40°C
- Safety level: CAT Ⅱ1000V 2A
- Features and application: used to SMT components, for UT611, UT612
- Amount: 1PCS
| Weight | 0.1 kg |
|---|---|
| Dimensions | 25 × 2 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT-L40 SMD patch clamp”
-
Environment Meters
A10T Temperature Humidity Meter
Main Features
1. Sampling time: 10s
2. Clock function: 12/24 hour mode
3. Alarm function: Rings up to 60s
4. Temperature measurement + Humidity measurement+ Time
5. Temperature testing range: -10℃~50℃(14℉~122℉); Accuracy: ±1℃(±1.8℉)
6. Humidity testing range: 10~99%RH; Precision: ±5%RH
7. Environmental comfort rating: Comfort, wet, dry
SKU: n/a -
Clamp Meters
CLAMP METER AC BM 528F
Product DescriptionBM528F AC Digital Clamp meter Technical parametersFunctionsRangeAccuracy(BM528F)DC Voltage200mV/2V/20V/200V/1000V±（0.8%+2）AC Voltage2V/20V/200V/700V±（1.2%+5）AC Current2A/20A/200A/600A±（2%+10）Ω Resistance200/2K/20K/200K/2M/20MΩ±（1%+3）Capacitance20n/200n/2μ/20μ/200μ/2mF±（3%+5）Frequency200/2K/20K/200K/2M/20MHz±（0.5%+3）℃ / ℉-50℃ ~1000℃-58℉~1832℉
±（1%+5）±（1.2%+6）SKU: n/a -
Oscilloscopes
UPO2104CS 4 Channels Ultra Phosphor Oscilloscope
Features and Benefits:
1、Sample Rate up to 1GS/s；
2、Channels 4；
3、Bandwidth 100MHz，；
4、Memory Depth 28Mpts (Standard)；
5、Waveform Capture Rate up to 50,000wfms/s；
6、With 256 level intensity grading display；
7、Up to 65,000 frames for Waveform Record ,Replay；
8、Support serial bus trigger and decoding；
9、8 inches, TFT LCD，WVGA(800*480)；
10、Interface：USB Host, USB Device, LAN, VGA, AUX OUT, 10MHz input/output.SKU: UP21O02CSMHZ -
Soldering Iron
Mechanic Special Solder Paste XG-50 35G 183°C
This is solder paste for soldering small SMD components in a reflow oven or with a hot air soldering station. comes in a small container for prototyping or repairing job.This pack is the right amount of solder paste for most hobby projects. This paste is the replacement for solder wire used in Through-hole soldering, some times solder flux is referred to as solder paste.
SKU: n/a
Related products
-
Meter Leads
UT L28 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- Double insulated wire.
- Removable tip shield sleeve.
- Banana plug input terminal, general type probes.● Leads length: 900mm, Rod length: 128mm
● Tip length: 16.8mm● Safety level: CAT III 1000V/CAT IV 600V 10A● Safety certificate: EN 61010-031 A1:2015● Features and application: Double insulated wire, removable
SKU: n/a -
Meter Leads
UT L25 Meter Lead
- Suitable for digital multimeter testing, convenient to use.
- Used to test current,voltage,resistance,capacitance,frequency,etc.
- Test pen tip with rubber shrouded protection, prevent wear and lasting use.
- High quality, it’s a good tool and brings a lot of conveniences.
- If you want to change your multimeter test lead, this is a great choice.
- Double insulated wire.
- Removable tip.
SKU: n/a
There are no reviews yet.