UT07 series socket testers can check socket-wiring errors. These tools are widely used in commercial and residential areas. UT07B testers also include the leakage test feature to check whether circuit breakers are working properly.
Voltage Detector
UT07A-EU Socket Tester
Availability:
10 in stock
Specifications | ||
Model | UT07A-EU | |
Operating voltage | 230V | |
Operating current | <18mA | |
Operating frequency | 50Hz~60Hz | |
Indications | OK, leakage test passed | |
OK | ||
Missing earth | ||
Missing live | ||
Missing neutral | ||
Live earth reverse | ||
Live earth reverse and missing earth | ||
General Characteristics | ||
Product color | Red and grey | |
Product net weight | 79g | |
Product size | 65mm x 65mm x 61mm | |
Standard individual packing | Blister, English manual | |
Standard quantity per carton | 48pcs | |
Standard carton measurement | 430mm x 330mm x 365mm (0.052 CBM per standard carton) | |
Standard carton gross weight | 5.8kg |
₨2,200 ₨2,700
10 in stock
CompareWeight | 0.1 kg |
---|---|
Dimensions | 6 × 6 × 6 cm |
Based on 0 reviews
Be the first to review “UT07A-EU Socket Tester”
-
Laser Distance Meters
LM 50 Laser Distance Meter
Specifications LM50 Display type EBTN Display size 2.0-inches Range 50m Min. display unit 0.001m Measurement units m/ft/in Measurement basis front/rear Accuracy ±(2mm+5 x 10-5D) Laser class 2 Laser type 630~670nm, ﹤1mW Features Single measurement √ Continuous measurement √ Max/Min/Area √ Volume √ Pythagoras √ Add/Subtract √ Data storage 20 groups Auto power off 3 minutes without operation Auto laser off 30s without operation Auto backlight off 10s without operation Audio indication √ Battery status display √ Storage temperature -20℃~70℃ Operating temperature 0℃~40℃ SKU: n/a -
DC Power Supplies
UTP1310 Switching DC Power Supply
Specifications Model UTP1310 Output voltage 0~32V Output current 0~10A Output power 320W Load regulation CV<0.1%+5mV
CC<0.2%+3mAPower regulation CV<0.01%+5mV
CC<0.2%+3mAOutput regulate resolution CV: 10mV (typical), CC: 1mA (typical) MTBF(e): ≥2000hrs Programming accuracy
(25℃±5℃)Voltage <0.1%+1digit Current <0.2%+3mA Ripple and noise
(20Hz~20MHz)Voltage ≤10mVrms Current ≤5mArms Display mode LED voltage and current dual display General Characteristics Power Input voltage: 110V AC/220V AC, 50Hz~60Hz Display EBTN LCD Product color White and grey Product size (W×H×D) 80mm x 150mm x 230mm Product net weight 2.5kg SKU: n/a -
Rework & Soldering Station
YH 950 HIGH FREQUENCY SOLDERING STATION
MODEL 950 RATED VOLTAGE AC 220V±10% 50Hz OUTPUT POWER 150W WORKING ENVIRONMENT 0~40℃ relative humidity<80% STORAGE ENVIRONMENT -20~80℃ relative humidity<80% BODY SIZE 20*12.6*9.8CM WEIGHT 4.6KG WORK VOLTAGE AC 26V±10% 50Hz TEMPERATURE RANGE Three-optional temperature control, respectively:①200-480℃,②100-450℃,③50-420℃ TEMPERATURE STABILITY ±1℃ (Static) DISPLAY TYPE LCD display PID TEMPERATURE CORRECTION CYCLE rapidly 20ms TIP OF GROUND VOLTAGE <2Ω TIP GROUND IMPEDANCE <2mV SKU: n/a -
Oscilloscopes
UPO 2104E Ultra Phosphor Oscilloscope
Specifications Model UPO2104E Bandwidth 100MHz Channels 4 Sampling rate 1GS/s Memory depth 56Mpts (single channel) Waveform capture rate 83,000wfms/s Time base scale (s/div) 5ns/div~50s/div Input impedance (1MΩ±2%) II (20pF±3pF) Vertical scale (V/div) 1mV/div~20V/div (1MΩ) Waveform record 65,000 Frames Trigger types Edge, pulse width, runt, window, N-edge, delay, timeout, duration, setup/hold, slope, video, code Waveform operations A+B, A-B, A×B, A/B, FFT, logic operation, advanced Auto measurements Peak-Peak, Amplitude, Maximum, Minimum, Top, Bottom, Mean, Middle, Cycle Mean, RMS, Cycle RMS, Area, Cycle Area, Overshoot, Pre shoot, Frequency, Cycle, Rise Time, Fall Time, Positive Pulse, Negative Pulse, Positive Duty Ratio, Negative Duty Ratio, Delay A->B (Rising edge), Delay A->B (Falling edge), Delay B->A (Rising edge), Delay B->A (Falling edge). Number of measurements Display 5 measurements at the same time Measurement statistics Average, Max, Min, Standard Deviation, Number of Measurements Frequency counter Hardware 6 bits counter (Channels are selectable) Standard interfaces USB-Host, USB-Device, LAN, AUX (Trig Out, Pass/Fail) General Characteristics Power 100V~240VAC, 50Hz/60Hz Display 8 inches TFT color LCD Display with WVGA (800×480) resolution Product color White and grey Product net weight 3.5kg Product size 336mm×164mm×108mm Standard accessories Probe×2/4 (1×, 10× switchable), Power cord, USB cable Standard individual packing Carton box Standard quantity per carton 2pcs Standard carton measurement 450mm×420mm×280mm Standard carton gross weight 9.7kg SKU: n/a -
Rework & Soldering Station
YH 8508D Hot Air Rework Station
- 1. The outer enclosure of the main machine is made of a superior iron alloy, which is immune to high temperature damage and is durable.
- 2.Unique material resistant to temperature is adopted for the handle enclosure; striking appearance, wieldy and resistant to temperature.
- 3.The hot air gun’s heating element employs brand new columned heating core developed with a ceramic process, having strong stability, resistance to impact and dropping, and extraordinarily vibration-mitigation ability.
- 4.The outlet steel cylinder of the handle is made of stainless steel with better thermal conductivity, resistant to rust and corrosion and strong resistance to oxidation.
- 5.Spiral wind design with strong airflow through a high quality diaphragm pump. Large air pressure, soft force and uniform face area. Apart from normal desoldering, it is particularly suitable for desoldering of SMD elements with small surface areas and high accuracy.
- 6.An LED shows the current operating temperature of the hot air gun; precise temperature control;
- 7.User-friendly design; hot air gun can be used with the manual/automatic function; can be set depending on the use environment; when the hot air gun is frequently used, choose the manual mode to save time for repetitive temperature rise, easy and convenient, improves work efficiency.
SKU: n/a
There are no reviews yet.