Main Features
1. Auto range
2. Auto polarity indication
3. Relative mode
4. Data hold
5. Auto power off
6. Capacitance measurement
7. Complies with CE (European Union) directives
19 in stock
Main Features
1. Auto range
2. Auto polarity indication
3. Relative mode
4. Data hold
5. Auto power off
6. Capacitance measurement
7. Complies with CE (European Union) directives
₨4,620 ₨4,878
19 in stock
CompareMain Features
1. Auto range
2. Auto polarity indication
3. Relative mode
4. Data hold
5. Auto power off
6. Capacitance measurement
7. Complies with CE (European Union) directives
Weight | 0.1 kg |
---|---|
Dimensions | 11 × 6 × 11 cm |
Specifications | Range | Best Accuracy |
Model | UT120B | |
DC Voltage (V) | 4V/40V/400V/600V | ±(0.8%+3) |
AC Voltage (V) | 4V/40V/400V/600V | ±(1.2%+3) |
Resistance (Ω) | 400Ω/4KΩ/40KΩ/400KΩ/4MΩ/40MΩ | ±(1%+2) |
Capacitance (F) | 4nF/40nF/400nF/4μF/40μF/100μF | ±(4%+3) |
Frequency (Hz) | 99.99Hz~99.99KHz | ±(0.5%+3) |
Features | ||
Display Count | 4000 | |
Auto Range | √ | |
Duty Cycle | 0.1%~99.9% | √ |
Diode | √ | |
Auto Power Off | Around 30 Minutes | √ |
Continuity Buzzer | √ | |
Low Battery Indication | ≤2.4V | √ |
Data Hold | √ | |
Relative Mode | √ | |
Input Impedance for DCV | Around 10MΩ | √ |
General Characteristic | ||
Power | 3V Battery(CR2032) | |
LCD Size | 43mm X 22mm | |
Product Color | Red and Grey | |
Product Net Weight | 76g | |
Product Size | 110mm X 58.2mm X 10.8mm | |
Standard Accessories | Battery,Carrying Case | |
Standard Individual Packing | Blister, English Manual | |
Standard Quantity Per Carton | 90 PCs | |
Standard Carton Measurement | 528mm X 323mm X 400mm (0.068 CBM Per Export Carton) | |
Standard Carton Gross Weight | 13.5 Kg |
Analog bandwidth | 150MHz | 250MHz | ||
Channels | 2+16 digital | 4+16 digital | 2+16 digital | 4+ 16digital |
Sampling rate (Analog) | 2.5GS/s (Single channel), 1.25GS/s (Dual channels) | |||
Sampling rate (Digital) | 1.25GS/s (Eight channels), 625MS/s(Sixteen channels) | |||
Memory depth | 70Mpts | |||
Waveform capture rate | 200,000wfms/s | |||
Time base scale | 2ns/div~50s/div (Real-time sampling rate, memory depth display ) | |||
Time base scale (digital) | 2ns/div~40S/div[Step by 1-2-4 stall] | |||
Input impedance | (1MΩ±1%) II (20pF±3pF) | |||
Input impedance digital | (101kΩ±1%) II (9pF±1pF) | |||
Vertical scale | 1mV/div~20 V/div (1 MΩ) | |||
DC gain accuracy | <5mV: ±3%, ≥5mV: ±2% | |||
Waveform record | 100,000 frames | |||
Trigger types | Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay |
|||
Bus decode | RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay | |||
Waveform operations | A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations | |||
Auto measurements |
Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width, -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A |
|||
Measurement display | 5 types | |||
Measurement statistics | Average, Max, Min, standard deviation and number of measurements | |||
Frequency counter | 6 bits | |||
Standard interfaces | USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA | |||
Standard Accessories |
USB interface cable | UT-D14 | ||
Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) | UT-P06 | |||
Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) | UT-P05 | |||
16CH Logic analyzer probe | UT-15M |
Product Features
1. Can set the interval forauto data recording
2. MAX/MIN/REL measurement mode
3. Peak hold
4. Analogue bar graph
5. Measure AC and DC in the same stall (AC+DC)
6. 4-20mA loop test
7. 45Hz-100kHz frequency response measurement
8. Double backlight
9. Misplug alarm
10. Auto and manual ranges selectable
11. USB interface available
12. Bluetooth connection with a cellphone for data monitoring
13. Temperature measurement mode,equipped with K-type point contact temperature probe
14. Complies with CE (European Union) and UL (United States) directives
There are no reviews yet.