UT181A is a digital multimeter with trend capture, true RMS, low pass filter, nS conductance, dual temperature measurement, and more. With the help of the datalogging feature, users can store up to 20000 sets of measurement data and display them on a trend graph for long term monitoring.
UT181A True RMS Datalogging Multimeter
1. Trend capture
₨80,400 ₨83,480
Specifications | Range | UT181A |
DC voltage (V) | 1000V | ±(0.025%+5) |
AC voltage (V) | 1000V | ±(0.3%+30) |
DC current (A) | 10A | ±(0.08%+10) |
AC current (A) | 10A | ±(0.6%+20) |
Resistance (Ω) | 60MΩ | ±(0.05%+2) |
Admittance (nS) | 60nS | ±(2%+10) |
Capacitance (F) | 60mF | ±(2%+5) |
Frequency (Hz) | 10Hz~60MHz | ±(0.01%+5) |
Temperature (°C) | -40°C~1000°C | ±(1%+30) |
Temperature (°F) | -40°F~1832°F | ±(1.5%+50) |
Features | ||
Display count | 60000 | |
Auto/Manual range | √ | |
Bandwidth (Hz) | 100kHz | √ |
AC+DC/Continuity buzzer | √ | |
Low pass filter | 1kHz | √ |
dBV/dBm | √ | |
Diode | Around 3V | √ |
Duty cycle | 10%~90% | √ |
Dual temperature measurement | T1, T2, T1-T2, T2-T1 | √ |
Data hold/Peak hold | √ | |
Relative mode | √ | |
Data logging | 20000 | √ |
Trend capture | √ | |
MAX/MIN/AVG | √ | |
Data time display/Data comparison | √ | |
Backlight adjustment | √ | |
Analog bar graph/USB interface | √ | |
Mis-plug alarm | √ | |
Battery indication/Auto power off | √ | |
Rechargeable battery | √ | |
Input protection | √ | |
Input impedance for DCV | ≥10MΩ | √ |
General Characteristics | ||
Power | Li-ion battery: 7.4V 2200mAh | |
Display | 3.5-inch 64K color TFT LCD (320 x 240) | |
Product color | Red and grey | |
Product net weight | 638.6g | |
Product size | 225mm x 103mm x 59mm | |
Standard accessories | Battery, test leads, temperature adaptor socket, point contact temperature probes, power adaptor socket, power adaptor, PC software CD, USB interface cable |
|
Standard individual packing | Gift box, carrying bag, English manual | |
Standard quantity per carton | 20pcs | |
Standard carton measurement | 480mm x 385 mm x 505mm | |
Standard carton gross weight | 25.3kg | |
Optional accessory | Bluetooth adaptor (UT-D07) |
Based on 0 reviews
Be the first to review “UT181A True RMS Datalogging Multimeter”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Watt Meter
UT233 Digital Power Clamp Meters
UT 230 series is a handheld intelligent power clamp meter, which combines with digital current meter and power meter. It is equipped with powerful measurement and data processing software, which can help complete measurements, calculations and displays of voltage, current, active power, power factor, phase angle, apparent power, reactive power, power, frequency, temperature and other parameters.
SKU: n/a -
Multimeters
UT61C Modern Digital Multimeters
Product Features
1. Analogue bar graph
2. Diode test and buzzer continuity
3. Auto range
4. MAX/MIN/REL measurement mode
5. Overload protection for all ranges
6. Data hold
7. LCD backlight
8. Equipped with RS232C and USB standard interface
9. Complies with CE (European Union) directives
SKU: n/a -
Clamp Meters
AC/DC DIGITAL CLAMP METER KEW 2056R
• Designed to meet international safety standard IEC 61010-1 CAT IV 600V.
• CAT IV Clamp Meters can measure the Voltage and Current in both every low and high power circuits.
• Very useful for power distribution companies, power utilities and maintenance fields.
• True RMS enables an accurate measurement.SKU: n/a
There are no reviews yet.