UT18D Voltage and Continuity Tester
10 in stock
1. Auto power off, the conductor to be measured is greater than 12V
₨12,000 ₨13,000
10 in stock
Compare
| Weight | 0.3 kg |
|---|---|
| Dimensions | 27 × 8 × 3 cm |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT18D Voltage and Continuity Tester”
-
SMD Tester
UT 116A SMD Tester
Specifications Model UT116A Display count 3000 Resistance 30MΩ Capacitance 30mF Diode test 3V LED/stabilivolt About 21V/1mA Continuity Test ＜30Ω DCV 36V Auto range √ Auto scan identification √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery SKU: n/a -
Soldering Irons
YH 947-VII Soldering Iron
1.Small size, light weight, easy to carry.
2.Use the internal heating type heating core, high efficiency.
3.947VII temperature adjustable.
4.947VII with a power switch, when the appliance is not in use, you can turn off the
switch, safe and energy saving.
5.The internal use SMT double-sided board manufacturing process, the process is neat
and the solder joint is firm.
6.The handle uses completely new environmental protection material, safe and durable.
SKU: n/a -
Soldering Irons
YH 928D-III Soldering Iron
1. Application of sensor temperature control circuit, microcomputer temperature control technology, accurate temperature, rapid heating, fast temperature compensation, is a with LED digital precision display portable constant temperature soldering iron.
2. Application of high precision switching power supply technology, small size, light weight, easy to carry.
3. Equipped with digital temperature correction function, sleep function, Fahrenheit / Celsius display conversion function.
4. Application of unique design of high-precision LED display, showing clear and beautiful.
5. Red is for 110W, yellow is for 90W and blue is for 65W.
SKU: n/a -
Blower
Blower SE 555
● The 600 Watt Skill Electric air blower produces high velocity & high volume air output that ensures blowing out the dust, leaves from the uneasy to reach areas of household appliances, electric panel, car interiors, garden etc.
● Dual function blower i.e blowing and extracting functions
● Powerful 600 W motor
● Variable speed control
● Ergonomic handle design
● Easy-to-change carbon brush
● 3-meter power cord for more flexible workSKU: n/a -
SMD Tester
UT 116C SMD Tester
Specifications Model UT116C Display count 6000 Resistance 60MΩ Capacitance 100mF Diode test 3.2V LED/stabilivolt About 21V/1mA Continuity Test ＜50Ω Battery test Load current ≈ 10mA Auto range √ Auto power off √ General Characteristics Power 1.5V battery (R03) x 2 Display 39mm x 20mm Product color Red and grey Product net weight About 80g Product size 204mm x 33mm x 25mm Standard accessories Battery . SKU: n/a -
Blower
Blower SE 768
● The 600 Watt Skill Electric air blower produces high velocity & high volume air output that ensures blowing out the dust, leaves from the uneasy to reach areas of household appliances, electric panel, car interiors, garden e t c.
● Dual function blower i.e blowing and extracting functions
● Powerful 600 W motor
● Variable speed control
● Ergonomic handle design
● Easy-to-change carbon brush
● 3-meter power cord for more flexible work
SKU: n/a
Related products
-
Wire & Cable Testers
TDR-410 Cable Fault Locator
-
Features:
- automatic or manual mode:
- the automatic fault location (AFL),
- mode with manual range selection and sensitivity,
- single measurement triggered manually or scanning continuous,
- 11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
- maximum length of cable up to 4000 m one end of the cable,
- “Dead zone” measure limited to 0.5 m,
- 2.5 “LCD screen with backlight,
- scan automatically or manually trigger,
- sensitivity set manually or automatically adjusted,
- adjustable impedance matching,
- propagation coefficient adjustment 1% to 99%,
- waterproof and resistant to mechanical housing.
- small size and weight.
- economical power system – 30 hours of continuously scan on one battery set..
Accessories:
- 0,6 m double-wire lead: WAPRZ0X6DZBB
- red crocodile clip: WAKRORE20K02
- Krokodylek czarny: WAKROBL20K01
- cover M-2: WAFUTM2
- automatic or manual mode:
SKU: n/a -
-
Wire & Cable Testers
MS6812 Cable Tracker
The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the insulation.For telephone line, it can identify some state in the line, and more convenience to install, debug, maintain telephone line.There is a Sender(MS6812-T) and a Receiver(MS6812-R)included in The Cable Tracker
● Sound and Light Instruction
● Cont and Tone LED LightApplications
– Judge Continuity of the Cables or Wires
– Track the Cables or Wires, and Diagnose the Break Point
– Receive the Tone Signal on the Cables or Wires(Telephone Line)
– Identify the State in the Working Telephone Line(Clear, Ringing, Busy)
– Send a Single Solid or a Dual Alternating Tone to the Target Cables or WiresSKU: n/a -
Wire & Cable Testers
LKZ-720 Wires and pipe locator
Features:
- the function 3D in the receiver – detecting the direction of current flow and accurate locating the object,
- phase detection mode,
- receiver operation with four transmitters at the same time to locate interruptions or distinguish wires,
- a LED bright torch,
- headphone socket in receiver,
- screens backlight for work in dark,
- transmission battery status and settings of the transmitter to the receiver
- operation in wide range of rated voltage, up to 500V RMS,
- measurement of voltage at the object to 500 Vrms,
- three levels of transmitter amplification,
- automatic or manual selection of transmitter operation modes,
- five modes of wire tracer operation – voltage, current, current-voltage, power and clamp,
- software upgrade via USB,
- additional accessories enable precise localization – such as contact or non-contact probes and measurement clamp.
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
There are no reviews yet.