UT281A True RMS AC 3000A Flexible Clamp Meters
10 in stock
1. 2m drop proof, IP54, ETL/Intertek certified 3rd edition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Data hold, backlight, auto power off
₨23,400 ₨27,640
10 in stock
Compare1. 2m drop proof, IP54, ETL/Intertek certified 3rd edition CE
2. Coil diameter: 0.75cm, bending length: 24.5cm for UT281A and 45.7cm for UT281C
3. Large LCD display for clear reading
4. True RMS
5. Long press INRUSH key for 2s to measure inrush current
6. Data hold, backlight, auto power off
| Weight | 0.22 kg |
|---|---|
| Dimensions | 30 × 15 × 5 cm |
| Basic Functions | Range | Basic Precision |
| Model | UT281A | |
| Max current measurement (AC) | 0.00A ~ 3000A | ±(3%+5) |
| Current measurement (AC) | 0.00A ~ 30.00A | ±(3%+5) |
| Current measurement (AC) | 0.0A ~ 300.0A | ±(3%+5) |
| Current measurement (AC) | 0A ~ 3000A | ±(3%+5) |
| Inrush current measurement | 0.00A ~ 3000A | For reference |
| Frequency response | 45Hz~500Hz (sine wave) | √ |
| Jaw size | Rogowski flex coil (diameter: 8mm) | Bending length: 10″ inches (24.5cm); radius: around 1.5″inches (3.8cm) |
| True RMS measurement | √ | |
| Measuring digit conversion rate | times/s | 3 |
| LCD display (TN) | interface | Single display |
| Manual range | √ | |
| Auto power off | √ | |
| Buzzer | √ | |
| Low battery indication | √ | |
| Data hold | √ | |
| Manual backlight | √ | |
| Working temperature | 0°C ~ 50°C | |
| 2m drop proof | √ | |
| Protection grade | IP54 | |
| Safety certification grade | CAT IV 600V | |
| General Characteristics | ||
| Device color | Red and grey | |
| Device weight | 220g | |
| Device size | 300mm × 150mm × 55mm | |
Brand
UNI T
Based on 0 reviews
Be the first to review “UT281A True RMS AC 3000A Flexible Clamp Meters”
-
Clamp Meters
UT219E ACA Professional Clamp Meters
Features
1. 2m drop proof, IP54, CAT IV 600V
2. Large 6000-digit LCD backlight (auto) display
3. True RMS
4. LoZ voltage test, for ghost voltage measurement
5. MAX/MIN/REL testing mode, data hold, excluding the test lead interference of resistance measurement
SKU: n/a -
Insulation Tester
JM Z16 HEAT INSULATION MAT
JAKEMY JM-Z16 Magnetic Heat Insulation Silicone anti-static Working Mat for Soldering Assembling Electronics DIY Repair.
Feature:
Brand new and high quality.
Heat-resistant coefficient: 300 Celcius degree (hot wind) / 230 Celcius degree (direct contact).
Anti-static coefficient: 1*10E12ohm.
Units design, easy to keep track of parts.
Food grade material, non-toxic and safe in use. 6. Suitable for electronics devices repairing.Accessories:
Anti-static and heat-proof working mat*1SKU: n/a -
Multimeters
UT195M Professional Digital Multimeter
Features
1. IP65 rating, 2m drop proof, CAT III 1000V, CAT IV 600V
2. Large 6000-count LCD screen
3. True RMS
4. ACV 750V 5kHz bandwidth
5. Flashlight
6. Auto LCD backlight controlled by light sensor (can be turned off)
7. LoZ voltage test, for ghost voltage measurement
8. Motor phase sequence measurement with 2 probes
9. 20A current measurement (max 30 seconds)
SKU: n/a -
-
Wire & Cable Testers
UT682 – Wire Tracker
UT682 – Wire Tracker consists of a transmitter and a receiver. It has functions like telephone wire tracking, network wire tracking, cable wire tracking, network wire check, etc. and it produces fast and accurate measurements. UT682 is an ideal tool for personnel to install and maintain network systems with communication lines and integrated wiring circuits.
SKU: n/a
Related products
-
Clamp Meters
UT201+ ACA Digital Clamp Meters
1. Auto range and 3/s sampling rate
2. Data hold
3. Max value hold
4. Auto power off
5. Low battery prompt, over-range prompt and auto polarity display
6. Comfortable tohold and easy to carry with (Product weight: 220g)
7. 1m drop proof
8. Complies with Double Insulationand Over Voltage standards of CAT II 600V, CAT III 300V and Pollution Degree 2
9. Complies with CE (European Union) directives
SKU: n/a -
-
Clamp Meters
UT210E ACA DCA Digital Clamp Meters
Main Features
1. Auto range, 2~3/s sampling rate
2. True RMS measurement
3. VFC, frequency conversion function
4. NCV, Non-Contact Voltage testing function:induce electric field strength via the jaw
5. Zero mode
6. LCD backlight, data hold
7. Auto power off, low battery indication and overload protection
8. Comfortable to hold and easy to carry with (Product weight: 160g/170g)
9. Complies with CE (European Union) directives
SKU: n/a -
There are no reviews yet.