UT281 series can measure large currents in various harsh and hard to reach environments. They are designed with Rogowski flex coil and can test up to 3000A AC current. UT281A/C are from UNI-T’s Pro Line series, which meet IP54 and 2m drop proof requirements. Due to the ease in operation, accurate readings, stable performance and reliable quality, these flex clamps are ideal tools for electricians.
Weight | 0.3 kg |
---|---|
Dimensions | 32 × 18 × 3 cm |
Specifications | Range | UT281E |
AC current (A) | 30A/300A/3000A | ±(3%+5) |
Frequency response | 45Hz~500Hz (sine wave) | √ |
Inrush current | 0.5A~3000A (for reference) | √ |
AC voltage (V) | 600V | ±(1.2%+3) |
Resistance (Ω) | 60MΩ | ±(1.2%+3) |
Frequency (Hz) | 20Hz~30kHz | ±(1%+2) |
Features | ||
Range selection | Auto (manual range available in current measurement) | |
Flex coil size | 18” (45.7cm) radius: 3.1” (8cm) | |
Display count | 6000 (3000 in current measurement) |
|
Refresh rate | 3 times/s | |
True RMS | √ | |
Display interface (LCD) | Dual | |
Data hold/Buzzer | √ | |
Auto power off | √ | |
Low battery indication | √ | |
Backlight/Function selection | √ | |
2m drop test | √ | |
General Characterisitics | ||
Power | 1.5V battery (R03) x 3 | |
Display | 32 x 34mm (1.8 inches) | |
Product color | Red and grey | |
Product net weight | 250g | |
Product size | 325mm x 180mm x 30mm | |
Standard accessories | Batteries, test leads | |
Standard individual packing | Gift box, blister, English manual | |
Standard quantity per carton | 10pcs | |
Standard carton measurement | 435mm x 380mm x 245mm | |
Standard carton gross weight | 6.3kg |
Based on 0 reviews
Be the first to review “UT281E True RMS Flex Clamp”
-
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
-
Environment Meters
UT320D Mini Contact Type Thermometer
Main Features
1. 1m drop proof
2. 4 times/s sampling rate
3. Maximum/minimum/average
4. Data hold
5. LCD backlight
6. Wide range, high accuracy
7. K/J thermocouple probe selection
8. CE certification
9. Difference measurement: T1~T2
10. Auto power off
11. Low battery indication
SKU: n/a -
Tool Kits
JM 8176 TOOL KIT
Minimum Order Quantity: 40
We devoted our heart to designing this precision bit set to achieve greater practicality.
One precision bit set includes 93 driver bits and 9 sockets.
It has CR-V chrome-vanadium steel bits with nickel-plated surface hardness up to 52°.
Additionally, our precision bit set is equipped with various auxiliary tools to help you better complete the maintenance work.SKU: n/a
There are no reviews yet.