UT283A is a handheld multi-functional device designed to measure and analyze single-phase power systems.This portable S class device can measure amplitude, phase, harmonics, current, voltage, and record results in SD card for further analysis and export.
Power Quality Analyzer
UT283A Single Phase Power Quality Analyzer
Availability:
Out of stock
1. Trend/event capture
2. Harmonics/inrush current measurement
3. File management through USB interface
4. Flick measure (PST/PLT values)
5. User friendly interface
6. Multimeter functions
7. Scope functions including waveform display
8. 3.5 inches 64K color TFT LCD display
9. THD (Total Harmonic Distortion) function
10.Long-term monitoring
₨0
Out of stock
CompareApplications:
This product is suitable for professional working in electrical power, medical, transportation, telecommunication, and other industrial areas.
Weight | 0.8 kg |
---|---|
Dimensions | 20 × 12 × 5 cm |
Specifications | Range | UT283A |
Voltage (V) | 10V~1000V AC/DC | ±0.5%Udin |
AC current (A) | 10A/100A/1000A | ±0.5%f.s. |
Frequency (Hz) | 40~70Hz | ±50mHz |
Power (W) | >15%S | ±1%S |
Power factor | 0~1 | ±0.02 |
Energy (Wh) | 0~9999MWh | ±1.5%rdg |
Crest factor | 1 to 10 | ±5% |
Voltage harmonics or inter-harmonics | Um≥3%Unom (1~51th, step 0.5th) | ±5%Urms |
Um<3%Unom (1~51th, step 0.5th) | ±0.15%Unom | |
Current harmonics or inter-harmonics | Im≥10%Inom (1~51th, step 0.5th) | ±5%Irms |
Im<10%Inom (1~51th, step 0.5th) | ±0.5%Inom | |
Power harmonics | (1~51th, step 1th) | Calculated based on voltage and current amplitude and phase accuracy |
Transients | ±6000V Peak, Fsample=2MHz | ±5%rdg.±5%f.s |
Dip/swell/interrupt | 0~1000V AC | Udin±1 % |
AC inrush current (A) | 10A/100A/1000A | ±1%f.s |
Resistance (Ω) | 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ | ±(1%+3) |
Capacitance (F) | 60nF/600nF/6μF/60μF/600μF | ±(4%+20) |
Features | ||
True RMS | √ | |
Harmonic analysis | Up to 51th | √ |
Flick measure | 10 minutes, PST and PLT values | √ |
Voltage ratio | √ | |
Current ratio | √ | |
Event capture | √ | |
Trend capture | √ | |
Data logging | 8GB | √ |
USB interface | √ | |
Backlight adjustment | √ | |
Low battery indication | √ | |
Input protection | √ | |
General Characterisitics | ||
Power | Li-ion battery: 7.4V 3600mAh | |
Display | 70mm x 52mm; 3.5 inches 64K color TFT LCD (320 x 240) | |
Product color | Red and grey | |
Product net weight | 808.4g | |
Product size | 199mm x 118mm x 49mm | |
Standard accessories | Power adaptor, power cord, test leads, test probes, alligator clips, current clamp (10A/100A/1000A), USB interface cable, PC software CD, SD card (8GB) | |
Standard individual packing | Gift box, carrying bag, English manual | |
Standard quantity per carton | 4pcs | |
Standard carton measurement | 665mm x 350mm x 305mm | |
Standard carton gross weight | 24.2kg |
Based on 0 reviews
Be the first to review “UT283A Single Phase Power Quality Analyzer”
-
Temperature and Humidity Meter
UNI-T UT332+ Digital Temperature Humidity Meter
1. Features of UT332+ Temperature Humidity Meter
● ℃/℉ selection
● Response time: around 1 second● Humidity offset settings● Temperature offset settings● Dew point offset settings● Wet-bulb temperature offset settings● Auto power off● Data hold/data recall● MAX/MIN● Auto record time setup● LCD backlight● USB interface for data and powerSKU: n/a -
LCR Meter
UT622A Digital Inductance LCR Meter
Specifications UT622A UT622C UT622E Certificates CE, RoHS Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz Test signal level 0.1Vrms, 0.3Vrms, 1Vrms Output impedance 100Ω Measurement parameters Primary: L/C/R/Z
Secondary: D/Q/θ/ESRPrimary: L/C/R/Z/DCR Secondary: D/Q/θ/ESR Auto LCR √ Test terminals Three-terminal test jacks, five-terminal test sockets Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s) DCR test rate — — Fast (20 times/s), medium (5 times/s), or slow (2 times/s) Ranging mode Auto/hold Tolerance range 1%~20% Testing circuit mode Series/parallel mode Clearing correction Open/short circuit Fuse of test ports 0.1A/250V Communication interface Mini-USB LED alarm for tolerance
(pass: green; fail: red)√ √ √ Display range Maximum reading 99999 Minimum resolution 0.0001 Maximum accuracy 0.001 L 0.00μH~99.999H C 0.00pF~99.999mF Z/R 0.0000Ω~9.9999MΩ ESR 0.0000Ω~999.99Ω D 0.0000~9.9999 Q 0.0000~99999 θ -179.9°~179.9° DCR — — 0.01mΩ–20.000MΩ Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C) General Characteristics Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A Display 2.8′ TFT LCD 320X240 Product net weight 420g Product size 93mm x 192mm x 44mm Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual SKU: n/a -
Voltage Detector
UT12M-US AC Voltage Detector
features:
1. Auto power off
2. Buzzer
3. LED indication
4. IP 67
5. AC voltagedetection
6. High/Lowvoltage mode
7. Magnetic solenoiddetectionApplications:
Low voltage mode: Low-voltage motor (<90V), audio systems, arc welding machines,underground mining lighting, cables with thick insulation layer and other weakelectromagnetic AC signals.
High voltage mode: Urban electric supply and three-phase systems (90~1000V). Forexample, power distribution units, electrical panels, electrical appliances.SKU: n/a -
Process Celibrators
UT714 Multifunction Temperature Process Calibrator
Features of UT714 Multifunction Temperature Process Calibrator
Certifications: CE, UKCA
● Step/ramp functions
● Source and measure accuracy up to 0.02%● Rechargeable battery● Contrast adjustment● Auto power off (Time adjustable)● Stores and recalls setups● USB communicationSKU: n/a
There are no reviews yet.