-20%

UT320D Mini Contact Type Thermometer

(1 customer review)
Availability:

14 in stock


Main Features

1. 1m drop proof

2. 4 times/s sampling rate

3. Maximum/minimum/average

4. Data hold

5. LCD backlight

6. Wide range, high accuracy

7. K/J thermocouple probe selection

8. CE certification

9. Difference measurement: T1~T2

10. Auto power off

11. Low battery indication

4,800 6,000

14 in stock

Compare

UT320D is a mini-type single-channel K/J thermometer, which ensures a wide range of product temperature measurement in high precision. It can be used with any K/J thermocouple probe.

Category:
Weight 0.1 kg
Dimensions 12 × 5 × 3 cm
pecifications Range Basic accuracy
UT320D
Temperature measurement (K) -50~1300℃ ±(0.5%+1)
Temperature    measurement (J) -50~1200℃ ±(0.5%+1)
Features
Auto power off
Low voltage    display
Difference measurement (T1-T2)
Data hold
Unit conversion (℃/℉)
Max/Min/Avg
Function selection (K/J)
Backlight
Working temperature 0℃~40℃
Working humidity (relative) ≤80%RH
1m drop test
General Characteristics
Power 3 AAA Zinc-manganese batteries
LCD size 37.4×36.4mm
Product color Red and grey
Product net    weight 0.06kg
Product size 120×53×28mm
Standard accessories Thermocouple probe, battery
Standard individual packing Blister, manual

Brand

UNI T

Based on 1 review

5.0 overall
1
0
0
0
0

Add a review

  1. Eric Jones

    Hi this is Original product thank you

    Eric Jones

  • ET 8138 DMM

    0 out of 5
    (0)
    • SLIM – Ultra-Thin Design That Fits Easily In Your Pocket.
    • AUTOMATIC – Automatic Range And Automatic Identification.
    • DESIGN – It Is Comparable In Size To The 4.7-Inch Mobile Phone. The Design Is Exquisite, Simple And Generous, 3.5 Inch Large Touch Screen.
    • COLOUR LCD DISPLAY – Simulation Bar: More Intuitive Display Of Measurements. The Analog Bar Provides Fast And Accurate Digital Representation.
    • MODEL – The Winapex 8138 Has A Colour Screen, And Has Hz Function.
    SKU: n/a
  • MS8910 Smart SMD Tester (R/C)

    0 out of 5
    (0)

    The Tester is a handheld and battery operated very convenient small Tool that is specially used to measuring SMD (Surface Mounting Device), there are Chip type resistor, Chip type capacitor, and diode. Moreover, the Tester also has the continuity checking function.
    ● Display 3000 counts
    ● Auto Ranging
    ● Auto Power Off
    ● Data Hold
    ● Low Battery Display
    ● Auto Scanning
    ● Diode Check Open Voltage 2.8V
    ● Diode Testing Current 2mA
    ● Continuity Buzzer <30Ω

    SKU: n/a
  • ,

    [HOT]JM-8189B

    0 out of 5
    (0)
    • 8 type 30 pcs of H4*28mm precision repair CR-V screwdriver bits, wide range of applications. Detailed and comprehensive.
    • Hanging screwdriver design in the inner box, easy to choose at a glance.
    • Whole new box texture, 300°rotating housing provides you with the convenience of maintenance and disassembly.
    • Approx. 220.8g light net weight, size 145*115*27mm, lightweight and portable.
    SKU: n/a
  • UT622A Digital Inductance LCR Meter

    0 out of 5
    (0)
    Specifications UT622A UT622C UT622E
    Certificates CE, RoHS
    Test frequency 100Hz, 120Hz, 1kHz, 10kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz 100Hz, 120Hz, 1kHz, 10kHz, 100kHz
    Test signal level  0.1Vrms, 0.3Vrms, 1Vrms
    Output impedance 100Ω
    Measurement parameters Primary: L/C/R/Z
    Secondary: D/Q/θ/ESR
    Primary: L/C/R/Z/DCR  Secondary: D/Q/θ/ESR
    Auto LCR
    Test terminals Three-terminal test jacks, five-terminal test sockets
    Test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
    DCR test rate Fast (20 times/s), medium (5 times/s), or slow (2 times/s)
    Ranging mode Auto/hold
    Tolerance range 1%~20%
    Testing circuit mode Series/parallel mode
    Clearing correction Open/short circuit
    Fuse of test ports 0.1A/250V
    Communication interface Mini-USB
    LED alarm for tolerance
    (pass: green; fail: red)
    Display range
    Maximum reading 99999
    Minimum resolution 0.0001
    Maximum accuracy 0.001
    L 0.00μH~99.999H
    C 0.00pF~99.999mF
    Z/R 0.0000Ω~9.9999MΩ
    ESR 0.0000Ω~999.99Ω
    D 0.0000~9.9999
    Q 0.0000~99999
    θ -179.9°~179.9°
    DCR 0.01mΩ–20.000MΩ
    Temperature coefficient 0.1× (specified accuracy) /°C (0°C~18°C or 28°C~40°C)
    General Characteristics
    Power 3.7V 1800mAh lithium polymer battery; Input: 220V (1±10%), 50Hz (1±5%); Mini-USB output: 5V, 1A
    Display 2.8′ TFT LCD 320X240
    Product net weight 420g
    Product size 93mm x 192mm x 44mm
    Standard accessories Short circuit board (UTR-001), USB cable, 5V 1A power adapter, Four-terminal Kelvin testleads (UTR-L100k-H) (UT622C/E), Alligator clip test leads with rubber plugs (UTR-002)(UT622A), English manual
    SKU: n/a
  • UNI-T MSO3254E 250MHz Mixed Signal 4 Channel Digital Oscilloscope

    0 out of 5
    (0)
    Analog bandwidth 150MHz 250MHz
    Channels 2+16 digital 4+16 digital 2+16 digital 4+ 16digital
    Sampling rate (Analog) 2.5GS/s (Single channel), 1.25GS/s (Dual channels)
    Sampling rate (Digital) 1.25GS/s (Eight channels), 625MS/s(Sixteen channels)
    Memory depth 70Mpts
    Waveform capture rate 200,000wfms/s
    Time base scale 2ns/div~50s/div (Real-time sampling rate, memory depth display )
    Time base scale (digital) 2ns/div~40S/div[Step by 1-2-4 stall]
    Input impedance (1MΩ±1%) II (20pF±3pF)
    Input impedance digital (101kΩ±1%) II (9pF±1pF)
    Vertical scale 1mV/div~20 V/div (1 MΩ)
    DC gain accuracy <5mV: ±3%, ≥5mV: ±2%
    Waveform record 100,000 frames
    Trigger types Edge, Runt, Window, Nth Edge, Delay, Overtime, Duration, Setup/Hold, Pulse Width, Slop, Video, Code; RS232/UART, I2C, SPI, USB,
    CAN, LIN, FlexRay
    Bus decode RS232/UART, I2C, SPI, USB, CAN, LIN, FlexRay
    Waveform operations A+B, A-B, A×B, A/B, FFT, editable advanced and logical operations
     

     

    Auto measurements

    Max, Min, High, Low, Ampl, Pk-Pk, Middle, Mean, CycMean, RMS, CycRMS, Period, Freq, Rise, Fall, RiseDelay, FallDelay, +Width,
    -Width, FRR, FRF, FFR, FFF, LRF, LRR, LFR, LFF, +Duty, -Duty, Area, CycArea, OverSht, PreSht, Phase, 34 parameters in totaldigital
    channel: Freq, Period, +Width, -Width, +Duty, -Duty, RiseDelay A→B,FallDelay A→B, Phase A→B, Phase B→A
    Measurement display 5 types
    Measurement statistics Average, Max, Min, standard deviation and number of measurements
    Frequency counter 6 bits
    Standard interfaces USB Host, USB Device, LAN, EXT Trig, AUX Out (Trig Out, Pass/Fail), AWG,UT-M15 logic analyzer probe, VGA
     

     

    Standard Accessories

    USB interface cable UT-D14
    Passive Probe x 2/4 (1 x , 10 x switchable,300MHz,) UT-P06
    Passive Probe x 2/4 (1 x , 10 x switchable,200MHz,) UT-P05
    16CH Logic analyzer probe UT-15M

     

    SKU: n/a