UT395 series are professional laser distance meters with color LCD display, electronic multi-axis leveler and other special features. Its unique operating system, friendly user interface, and personalized settings option all make these devices the perfect choice for professional distance measurement.
UT395A Professional Laser Distance Meter
9 in stock
UT395 series are professional laser distance meters with color LCD display, electronic multi-axis leveler and other special features. Its unique operating system, friendly user interface, and personalized settings option all make these devices the perfect choice for professional distance measurement.
₨7,680 ₨8,664
9 in stock
CompareWeight | 0.4 kg |
---|---|
Dimensions | 13 × 6 × 5 cm |
Function | Remark |
Range | 0.05-50m |
Min Unit | 1mm |
Accuracy** | ±(2.0mm+d*5/100000) |
Max Laser Power | <1mW |
Laser Wave Length | 635nm |
Max/Min/Continuous | √ |
Area/Volume | √ |
Triangle Pythagorean | √ |
Triangle Height/ Angle | √ |
Triangle Area | √ |
Dip Angle Range | -90.0°~90.0° |
Delay Measurement | √ |
Staking-out | √ |
Storage Quantity | 100pcs |
Universal Electron Level Ruler | √ |
Auto Power off | 100s-300s (adjustable) |
Auto Laser off | 20s-120s (adjustable) |
USB Connector | √ |
Storage Temperature | -20℃~60℃ |
Operating Temperature | 0℃~40℃ |
Storage Humidity | 85%RH |
Dimension | 126*56*28mm |
Battery | 1.2V 800mAh AAANI-MH battery *3 |
Based on 0 reviews
Be the first to review “UT395A Professional Laser Distance Meter”
-
Environment Meters
UT361 Anemoscopes
UT360 series anemograph is a professional anemograph used to measure wind temperature, wind speed and wind capacity, which is of stable performance, reliable and of neoteric appearance. The device can be widely used in the fields such as environmental protection, labor hygiene, industrial enterprise, scientific research. It is applied to environmental noise measurement, machinery equipment noise and architectural acoustics measurement.
SKU: n/a -
Environment Meters
UT352 Sound Level Meter
1. MAX/MIN modes
2. Auto power off (cancelable)
3. 63 sets data storage
4. AC/DC analog signal output
5. Over/under range indication
6. Data hold, LCD backlight
7. Simulated analog bar
8. A (ear)/C (machine) weighting modes
9. Manual/auto range selectable
10. Fast/slow response rate (fast: 125ms, slow: 1s)
11. Powered by batteries or external power source
SKU: n/a -
Wire & Cable Testers
TDR-420 Time Domain Reflectometer/ Cable Fault Locator
Product features
- Possibility damage-free location of impedance changes of tested cables and wires such as:
- shorted conductor,
- open conductor / end of cable – useful during the inventory of warehouses and stores,
- splice,
- splitter,
- water ingress,
- wet splice,
- bridge tap
- or other changes.
- Single measurement mode ONCE,
- Continuously measurement mode CONT,
- Tone signal generator TONE,
- Two cursors to mark two places of damage along with an indication of the distance between them,
- Built-in HELP function for easier interpretation of the reflectogram,
- 11 available measuring ranges from 7 m to 6000 m,
- „dead zone” limited to 0.6 m,
- Color 3,5” LCD TFT display with resolution 320 x 240 pixels,
- manually set of sensitivity in 8 steps GAIN,
- output impedance regulation up to 200 Ω (possibility of measuring pre-insulated pipes),
- Velocity of Propagation set in range from 10% to 99%,
- tight and durable housing with IP67 ingress protection degree.
- Small size and weight.
SKU: n/a - Possibility damage-free location of impedance changes of tested cables and wires such as:
There are no reviews yet.